• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Recent content by llars

  1. L

    Asus A8N32 SLi Deluxe broke??

    Windows is very picky about switching motherboards, espically if they have different chipsets. If you have an extra hard drive laying around, it wouldn't hurt to try loading Windows onto it.
  2. L

    Need a 3/8" elbow fitting for Tank O Matic

    Thank-you for the part number. That is BSPT and I need BSPP. Different threading. I have been up and down McMseter's website several times and I cannot find anything that fits y needs. The best option I have found so far is to get a 1/4" BSPP hex nipple from McMaster and one of Danger Den's new...
  3. L

    Need a 3/8" elbow fitting for Tank O Matic

    And I would need a hex nipple to connect it to the reservoir...
  4. L

    Need a 3/8" elbow fitting for Tank O Matic

    I am looking on Sharka and they have nothing in 3/8" http://sharkacomputers.com/fifor3idtu.html McMaster has a very limit stock of bspp. I have also looked at Frozen, SVC, High Speed PC, Sidewinder, Directron, Voyeur Mods, Xoxide, and Performance PCs.
  5. L

    Need a 3/8" elbow fitting for Tank O Matic

    I have an Innovatek Tank O matic Plugon attached to an Eheim pump that I need a fitting for. The tank uses 1/4" BSPP fittings and my loop is 3/8". I am tight on clearance so I need an elbow fitting. Any suggestions?
  6. L

    FS : Cisco L3 Switches *GigE*

    bump for you. Do you have any WIC cards? I need an Ethernet interface or two...
  7. L

    WTB Cisco WIC-1ENET module

    Looking to buy a Cisco Ethernet WIC Card. I can pay with PayPal. If you have one sitting around, shoot me an offer.
  8. L

    SATA Adapter for Tape Drives?

    I have a SCSI Tape Drive that I'd like to connect to a SATA interface. Are there any good SCSI to SATA adapters that will work with Tape Drives?
  9. L

    Maze4 GPU clearence above card?

    I am going to be using a pair of Maze 4 low profile GPU blocks with 7800gt's on an Asus A8n32-SLI and I am concerned about the mounting hardware interfering with the upper X4 slot which I need for a SATA Raid Controller. Does anyone know if the slot above is usable with these blocks...
  10. L

    WTT: My Nintendo Wii for your Xbox360/PSP

    Where are you located?
  11. L

    pushing a PC P&C 510-deluxe to the max.....

    Wow, you guys just took a load off of my shoulders. Here is what I am currently running: X2 3800+ 7800GT Sli 1gb PC-3200 Two Raptors Four 300gb Seagates Five fans I am going to be replacing the Four 300gb drives with Six 400gb drives soon and I will be adding 10x 120mm fans and two...
  12. L

    Mixing Hard Drive types in RAID?

    I am currently running 4x 300gb Seagate 7800.8 drives in JBOD (The onboard Raid-5 on the A8N-SLI sucks balls). I am planning on buying a Highpoint 2320 controller and two more Hard Drives to do 1.5TB in Raid-5 when I upgrade my motherboard, but the 7200.8 drives are getting hard to find because...
  13. L

    FS: Motherboard, CPU, HDD, Memory

    ygpm
  14. L

    Funny story

    This is almost as funny as the guy who cut the connector on his brand new 7800gtx so it would fit into a PCI slot.
  15. L

    Fitting a Scythe Ninja on Socket A...

    If you have one of the Socket A boards with the four mounting holes, it should be possible. But that would be a heck of a lot of weight for two clips.
See more
Back
Top