• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Recent content by Lioninstreet

  1. L

    Powercolor 6850 SCS3 setup

    I removed the intel graphics driver in device manager and that cured the problem. But any advice or a link to a good driver removal procedure would be helpful. I was looking at this subject on antother forum and there sure are alot of confilicting opinions
  2. L

    Powercolor 6850 SCS3 setup

    Yes. When both monitors are plugged in the screen shows the same exact thing on both. A desktop with no icons and no mouse functionality. Unplug either and the desktop icons and mouse come back.
  3. L

    Powercolor 6850 SCS3 setup

    @aznever, There were no other graphics drivers installed on this build. But I did just double check device manager found that the intel graphics diriver had been installed automatically. I disabled it but still have the same issue. I'd like to remove this other driver entirely. any...
  4. L

    Powercolor 6850 SCS3 setup

    Thanks for all the replies. It sounds like I'm probably not stating clearly stating the problem that I'm having with this card. Everyone is suggesting similar solutions, but I'm not able to try any of them. Here is what is happening. When do a cold boot with both the DVI and the HDMI...
  5. L

    Powercolor 6850 SCS3 setup

    @aznever, I have a silverstone FX121 mounted on the back of the case that is blowing directly on the card. It never goes over 60c. With one monitor plugged in, I can get to screen resolutions. But obvously the dual monitor options dont appear. My problem is I cant get a desktop when 2...
  6. L

    Powercolor 6850 SCS3 setup

    @delvryboy, Any idea how to unset it? I can only get into catalyst when in single monitor DVI so maybe I just cant find the right screen to do it. In fact my computer monitor has dual inputs (DVI and VGA). When I run the monitor on the VGA with a DVI adapter, then try to output to the monitor...
  7. L

    Powercolor 6850 SCS3 setup

    The 8.91 device driver I'm using came directly from the powercolor site and is dated 12/13/11. Could you be referring to the Catalyist driver ver.11?
  8. L

    Powercolor 6850 SCS3 setup

    Just got one of these passive PowerColor 6850's and am using the 8.91 driver. Can anyone offer some setup advice? When I first started using the card I was able to display simultaneous images using both the DVI and the HDMI outputs. Now for some reason the card has stopped displaying the...
  9. L

    P8z68-Deluxe/gen3 RAID on both Intel & Marvell Controllers??

    I read a few posts on this issue that were about 6 months or older. Nothing seemed current. Not sure if what I'm trying to do is even possible. The plan was to use an Asus P8Z68 board to set up 3 Crucial m4 SSD's in Raid 0. Those familar with this board know there are two Sata 3 ports with...
See more
Back
Top