Recent content by L4mka

FINISHED

UPDATE The latest update is here. Finally :D RAMs are ultimately HyperX Fury 64 GB and the SSD is Kingston KC1000 480 GB At the top after the adjustment, a 360 mm radiator was placed so as to cover as little of the board as possible, and it was also possible to get well enough to...

Thanks for your comments!! Here is next update :) ------------------------------------ UPDATE Another update is here, finally :D Continue drilling of 20 mm holes for fittings passtroughs. Here it really pays 8 times measuring, one times cutting :D For a long time, I thought...

Welcome all to my new project! I wanted to start this project before Christmas, but time was not like that anymore.. but the new project is here! The name of the project is based on the name of the C700P case and is a little modified due to the Formula X motherboard, it has not some deeper...

UPDATE Before Christmas and during them I did not get time to write the update, until today .. :) GPU Block from Bitspower before polishing And after polishing, a noticeable difference and I like it more It is time to break the warranty seal and equip the card with the water block...

UPDATE I sprayed the sheets inside the case with a filler and then two layers of matt black paint. The sheets are still rubbed and scratched and other layers will be sprayed, but I did not want to work with HW and greasy sheets :D The top 360 rad is a little nut in this case, if you want...

UPDATE After painting both layers of red it was beautiful red. Before the dragon spraying, the red was clear coated (just in case). Fortunately, the MSI logo has been delivered in the vectors, so cutting the template on the plotter was easy fun :D First of all, the stripes, seal...

UPDATE The beginning is always quite clear – take off from the case everything that will be modded or completely out :-D All aluminum parts on this case will be sprayed, the front and top panel on the red + airbrush stripes and MSI dragon and legs of the case on black. The red color will be...

Welcome to the next project! It's one of two that I want to finish this year. The second will be in the new Cosmos C700P and soon I will also start the thread here on the forum :) After the 24-hour Nvidia GeForce Garage in Poland, I return to my favorite Phanteks Enthoo Evolv ATX TG. This...

FINAL PHOTOS!! Finished :) Thanks to all sponsors!!

Last update :) Next one will be with final photos Lots of measuring for tubing so in the end it will be all accurate and straight. Bitspower passthroughs :) The parts I cant imagine my loop without The most measuring was with the graphics card but it paid off This tube will be...

It was quite hard to fit D5 pump in the bottom part of the case :D Really small space for pump so I was able to drill only two holes for the pump. Other the I have to drill from other side. There was no way to access nuts so I have to glued them to the plate, but it works out very...

Airbrush on the case is finished! Also the clear coating on it and polishing. The BIG gold TUF logo :) Also the Bitspower on the front side. Finally I know how the entire water loop will look like. There goes lot of time to measuring holes for tubing because every mistake will be very...

Here is next update! In april I have not much time because I have to complete one computer for ASUS CZ office. Airbrush and clear coating on this case is finished and only remains polyshing. Update about airbrush will be very soon! For now I have placed in case MB, GPU and RAM. Thanks...

FINISHED! :)