Recent content by kill8r

  1. K

    Deshrouding a EVGA XC3 3080 - Advice Please

    I guess what has me confused is that I don't have my gpu fans connected to the cpu they are connected to the aio header on the motherboard. Therefore I don't know how to best set a profile for it.
  2. K

    Deshrouding a EVGA XC3 3080 - Advice Please

    Any advice on the best applications for setting franchise profiles etc and monitoring temps etc? I have my cpu fans on the cpu header and the gpu on the aio header on the strix 570-i
  3. K

    Deshrouding a EVGA XC3 3080 - Advice Please

    Hahahahaha In the ghetto where things are super quiet and its cold as ice.
  4. K

    Deshrouding a EVGA XC3 3080 - Advice Please

    Yes but that would require taking a dremel to the heatsink which I prefer not to do. This was I can still sell the card on when the 3080ti or similar is released.
  5. K

    Deshrouding a EVGA XC3 3080 - Advice Please

    IT WAS THE BIOS!!!! All working fine now. Now I get to start tweaking. I also removed the fans on the gou but left the shroud as the shroud buts nicely against the Nocturn and functions like a duct. This also saves me from using the dremel. Thermals shortly.
  6. K

    Deshrouding a EVGA XC3 3080 - Advice Please

    Unfortunately its full lockdown here in London
  7. K

    Deshrouding a EVGA XC3 3080 - Advice Please

    Thank you for all the help. I am going intake on cpu and gpu. Trying to source a cpu to update the bios now. I hope that's the issue at not a hardware fault.
  8. K

    Deshrouding a EVGA XC3 3080 - Advice Please

    What is cheapest cou I can buy to do this please?
  9. K

    Deshrouding a EVGA XC3 3080 - Advice Please

    I have confirmed the Power supply is sufficient. Thanks for all the help
  10. K

    Deshrouding a EVGA XC3 3080 - Advice Please

    Thank you bud. Why would this set off the RAM warning light and not the CPU light?
  11. K

    Deshrouding a EVGA XC3 3080 - Advice Please

    My Power supply is brand new Corsair Platinum 600 (750 was out of stock)
  12. K

    Deshrouding a EVGA XC3 3080 - Advice Please

    https://pcpartpicker.com/list/WGR3wz This is my actual list of components and yes there are some warnings:
  13. K

    Deshrouding a EVGA XC3 3080 - Advice Please

    Thanks for the help. How would I know if it was showing out? The motherboard didn't come with any screws. Is there an example of what the screws should look like? Found this stamp (last 4 digits are 2407) Thank you for the help! Much appreciated
  14. K

    Deshrouding a EVGA XC3 3080 - Advice Please

    Strix X570-i motherboard The light for DRAM is on and I have tried everything... one ram stick in each slot, refitting gpu, reconnecting all psu cables. Thanks for the help! If I do need to do a BIOS flash I have no.odea how to.do.it when I can't see the bios screen.
  15. K

    Help Please - New Build In Ncase M1 with no video signal... X570-i, 5950x, 3080

    Ok booted her up for the first time and no video signal. All fans working, LEDs on motherboard and gpu working. No beeps and stays on. My keyboard also isn't lighting up. 1) If I have a Ryzen 5950x in a x570-i motherboard do I need a newer bios installed for it to show a video signal or boot to...
Top