• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Recent content by ISOHaven

  1. I

    Overclocking a 3.2GHz 640 on an Asus P5AD2-E Deluxe with low temps

    Default? No. I believe default was 1.35. Could I get into windows? Yes but CPU Stress Test would fail anywhere from 9 minutes to 1 hour.
  2. I

    Overclocking a 3.2GHz 640 on an Asus P5AD2-E Deluxe with low temps

    "i would reconnect your psu fan" Like I said I have a FANLESS PSU. http://www.antec.com/us/productDetails.php?ProdID=24350 "run out and buy a temp probe so you can get your real temps." I'll see how much they cost. However, even if the readings are a little off my machine is still safe...
  3. I

    Overclocking a 3.2GHz 640 on an Asus P5AD2-E Deluxe with low temps

    I couldn't find any information on my specific mainboard and processor (too new I guess) so here it is for anyone that may come across an Asus P5AD2-E Deluxe and a Pentium 4 640 3.2GHz processor. After three tries I came up with a very stable o/c of 4000MHz+. The settings are very...
  4. I

    Who's Telling The Truth?

    I was using blend. Seems like more of a memory test. I'll use the others. Thanks!
  5. I

    Who's Telling The Truth?

    I can see the TM2 working now: I don't quite see the point of using Prime95 as a stress test? It uses all my memory and hardly any CPU. Thus CPU-Z always showed the lower setting. It wasn't until I used CPU Stress Test v6.0 that the throttling hit the ceiling and my temps went up. Prime95...
  6. I

    Who's Telling The Truth?

    "Some advice, DON'T USE BMP IMAGES" First, it's not a BMP. Second, if your browser can't handle it then might I suggest a different browser. It's named that way because I didn't have time to deal with it. I already had a untitled.jpg in there and I barley had time to post as it was.....anyway.
  7. I

    Who's Telling The Truth?

    I take it by your bold response you are attempting to inform me that TM2 throttling will in fact throttle below my CPU's stock speed. Someone was polite enough to actually explain that on another board. Thanks.
  8. I

    Who's Telling The Truth?

    It just dawned on me. CPU-Z has to be wrong. How can my multiplier be 14??? My normal speed is 200. So 200X14 is 2800. My CPU is 3200. I went into BIOS and changed from 20% overclock to normal and now CPU-Z say I'm running at 2831.5. Seeing as how I have a 3.2GHz processor I'm thinking...
  9. I

    Who's Telling The Truth?

    "CPU LockFree" Didn't see that anywhere "If it's enabled, try disabling it" Didn't work I should note my MB: Asus P5AD2-E Deluxe Thanks everyone.
  10. I

    Who's Telling The Truth?

    Which one of these programs is full of crap? cpu-z reads the same as Ai Booster for about 5 second before it converts to it's new numbers. My BIOS is set to what Ai Booster is reading. Am I suposed to only look at CPU#1 (logical unit) instead?: Thanks for any insight, Justin
  11. I

    P5AD2E - Deluxe OnBoard Audio Output Issue

    "tell us what type of S/PDIF connection you are using" As I mentioned, digital. Both connection types, optical and coax. It doesn't matter how the data gets to the reciever unless I have a bad cable which I've already checked out. Analog 6 channel is fine. "what the two receivers are"...
  12. I

    P5AD2E - Deluxe OnBoard Audio Output Issue

    Any subject in particular??? It's a pretty normal FAQ. Is there a problem with my post? I already see tech issues replied to...
  13. I

    P5AD2E - Deluxe OnBoard Audio Output Issue

    Asus tech support is no help at all. After a generic email back from them I can't get them to respond at all. Here is the problem I described to them: I have two audio recievers hooked up to your rear panel optical out of your mainboard (one at a time). When either of these where used on...
See more
Back
Top