okay... left battery out, unplugged both power connectors, unplugged from wall and let it sit for about two hours. When I reconnected everything and plugged the battery back in, same thing. It is setting the FSB to something in the twenties. It freezes on memory test of post(49) and resets...
:) it is the same version. Detects a Pentium 5 2.6ghz but clocks 2 cores at 2ghz.
Thanks alot. BTW. I had just popped the battery out like 15 minutes before I read this... gonna leave it out for about 30 or so. I have bios update and flash util already on cd waiting on me to get windows on...
Tried a hard CMOS reset (disconnect everything but RAM and CPU, including battery and then short jumper) and it went back to an error 6F, but after leaving it powered down for about a minute reverted back to the error 49. I'm wondering what else I can do. Posting on Abit forums and looking for...
Do those operate on lithium batteries? Just a thuoght... when certain lithium batteries (like those used in RC planes) come in contact with air they react violently.
Just set up components and now I can't get it past POST.
Here's my setup:
Pentium D 805
A-Bit AW8
1gb GSkill DDR2 667
Pioneer DVD-R
Seagate ATA HDD
Antec TruePower 2 550W
Couldn't get past POST, so I unplugged all cables including PSU to mobo and reset cmos jumper. Now I'm getting...
how much does having dual channel support help out actual speed? I'm running an UATA HDD to start off, and I have a feeling that will be my biggest bottleneck :(
It's socket 775 but isn't listed to support Pentium D... which i've read is only two prescotts back to back. I have a truepower 550W, and I plan on getting a decent cooler and using some arctic silver.
definatelty doesn't have to be MATX, would prefer ATX actually. Needs to use DDR2 667 though, for financial reasons... I like the one you posted, but it uses 800. However...
http://www.newegg.com/Product/Product.asp?Item=N82E16813127216
This Abit uses 667, and is what I need 100%...
I've been working on the research front...
looking at ASUS P5LD2-VM now
http://www.newegg.com/Product/Product.asp?Item=N82E16813131545
I understand that almost any Mobo will allow for uppping the FSB to 180 (making proc 3.6) but I also want to keep it open to more overclocking in the...
I've decided to go with a Pentium D 805 due to it's ability to be extremely OC'd and a Geforce 7600GT. It's worth it to me to pay $20 more now instead of waiting for conroe. I'm looking for a decent mobo that has at least one PCI-E x16 and dual channel support, but most of all one that will...
i have a p4 2.4ghz and 256megs of ram, onboard video card. I know Pentium D will drop 20 bucks in a month and a half and cheapest conroe will be about what i want to pay now, but I don't want to loose summer gaming time because I'm waiting for conroe... still not really sure. Looking at D 805...
dont know about videos, but hold the iron onto what you want to solder until it heats up, then -slowly- touch the solder into it to make a small bead. Dont practice on anything important... get a wire and a piece of metal or something and mess around until you get your technique down...