With G.Skill, there's a sticker on the ram sticks. If you look at the code above the serial number, it will tell you the die. 9th digit will tell you IC manu (1 = Samsung, 2 = hynix) The 11th digit will tell you die (A = A Die, M = M Die, etc).
There's plenty of 4080's available. No rush to go for the cash grab.
M-die still overclocks well around the 7000-7200 range on intel. Will have the the benefit of better timings than A-Die. So for AMD systems, it'll be better to go for the 6000-6400 range if possible, with better timings. So i...
If you look at the 9th digit on the code on the sticker that's above the serial number and it's a 2, it's hynix, the 11th digit on the code represents die, A for A-Die, M for M-Die. If you have something other than that, it's probably Samsung chips.
If you get the free G.Skill DDR5 6000 cl 30 memory kit, you have the potential of getting the more expensive Hynix A-Die memory chips. These are known to overclock to 7600-8000+ on intel systems. Unfortunately, Ryzen 7000 processors are pretty much limited to around 6000, maybe slightly higher...
I'm using Throttlestop and have it undervolted by -150 offset. I also have turbo boost disabled. If I have turbo boost enabled during high usage the thing still gets up to -95c. But I noticed with other laptops with the 8300h run hot too. At first, I thought I did a bad paste job but when I...
http://www.coolermaster.com/peripheral/keyboards/sk650/
Here's a link for the Cooler Master SK650 slim style mechanical and uses cherry low profile switches. There's also the SK630 & 620 depending on how many keys you want.
I recently picked up a rift bundle for $140 and came with everything in box (headset, 2 touch controls, and 2 sensors). Are there any good exclusives for the rift? What's the best way to clean the headset?
I noticed I get outside light from the nose area on the face foam. Is there a foam...
Right now, I repasted and have it locked to 2.3 GHz base clock and undervolted. It now idles at 35c and gets up to 70c during stress tests and gaming. This is a lot better than before when I was getting 55c idle and upwards of 95c during stress tests.
But again, If I enable turbo boost by using...
If I change the processor state to 99 it locks the 8300h to 2.3 GHz. I still want it to Turbo boost, just not all the time. I only want it to turbo when the usage calls for it.
I'm looking at this HP pavilion 15 laptop that has a core i5-8300h & 1050ti. Now the power plan is set to balance and the CPU usage is below 10% and it's turboing to Max 3.9 GHz on all cores all the time. This is an issue as the cooling system on the laptop sucks.
Why is the laptop turboing...