• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Recent content by Gtek

  1. G

    SFF Case for mini-ITX GPU/MB

    That power button position is more practical I have to say.
  2. G

    SFF Case for mini-ITX GPU/MB

    Of course not. But this is first small production run. When I fabricated my own prototype, everything fitted ok. But get 3rd party manufacturer involved and you get 0.5mm out here, 1mm out there and things suddenly don't fit as they should, specially when you have such a tight case design. I...
  3. G

    SFF Case for mini-ITX GPU/MB

    Thank you Noddy Jnr for sharing your build and feedback. We are working with new manufacturer and some B2B customers on fixing all the issues for new revision. Nice dog by the way :)
  4. G

    SFF Case for mini-ITX GPU/MB

    Try test without shell... see what tepms. you'll get
  5. G

    SFF Case for mini-ITX GPU/MB

    Mine wasn't 970. It was Claire and her 970 which peaked 80C during stress test. She reported 70-75 during gaming, which is fine in my opinion.
  6. G

    SFF Case for mini-ITX GPU/MB

    as for cooler I always recommended Noctua NH-l9i, as it should work with most of the cpu socket positions. It's also sufficient cooling solution in my opinion as I did all stress testing with Intel stock coolers. There are so many itx boards out there these days and so many coolers, that making...
  7. G

    SFF Case for mini-ITX GPU/MB

    you would be better off with one decent 140x45 full copper radiator. The problem is that radiator like this is 180+ mm long, so it wont fit Osmi footprint. Replacing HDD with pump/reservoir combo, will physically fit it, but practically, if you consider cabling and tubing/fittings, it would be...
  8. G

    SFF Case for mini-ITX GPU/MB

    Increasing height would be enough for AIO, but full (pcu+gpu) watercooling requires complete redesign and just under 12L is best what I can do, even so, it will be very tight with all the plumbing, pump, reservoir, fittings, radiator, etc... It will be designed for R9 Nano and Fury single slot...
  9. G

    SFF Case for mini-ITX GPU/MB

    Something like that yes :) Exactly.
  10. G

    SFF Case for mini-ITX GPU/MB

    It will happen. 12L fully watercooled ITX.
  11. G

    SFF Case for mini-ITX GPU/MB

    I don't want to say too much at this point, but if you are patient enough, you might see a bit bigger brother of Osmi for watercooling, maybe before the end of the year ;)
  12. G

    SFF Case for mini-ITX GPU/MB

    Then it comes to numbers I only numbered first 10 white cases. But if you PM mu your name and Order #, I can look into shipping order and give you your number :)
  13. G

    SFF Case for mini-ITX GPU/MB

    I ran it with 3DMark and as far as I can remember it peaked 90?. That was in AUTO, so that's what the cards allowed. It was lower in real-life tasks like gaming, etc.
  14. G

    SFF Case for mini-ITX GPU/MB

    Hi, sure, feel free to start new thread if you like. Thanks.
  15. G

    SFF Case for mini-ITX GPU/MB

    You would need to remove 2x10mm section. Funny (not) that card on the picture is GTX760 ITX as well, but from Asus and it fits no problem... https://imgur.com/z34QHZ8
See more
Back
Top