• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Recent content by getyasome

  1. G

    Official ASUS P8P67 Series Overclocking Guide and Information

    Yes I played around with the 103 on the old board before the recall and had a stable Overclock as I wanted to get as close to 2000MHz on my Dominator GT CMT8GX3M2A2000C9 witch was 1922 I believe with a 103 BCLK. But now I just went with the 100 and 2133MHz .. I know the ROG board does well with...
  2. G

    Official ASUS P8P67 Series Overclocking Guide and Information

    Try a + 0.060 on the offset , Mine is at 0.040 but see what works for you. Load-Line Calibration: Medium That's the only difference between mine & yours.. Good luck
  3. G

    Official ASUS P8P67 Series Overclocking Guide and Information

    Running the test for at least 12 hours is recommended. That's from the web forums but I would do half that , say start it up a few hours before you hit the rack and keep a eye on things the first few than let it go till you awake.:o If you need a full license I have a few just fire me off a PM...
  4. G

    Dominator GT CMT8GX3M2A2000C9

    Wow what a sweet case , I looked at it some time ago and I do believe It was listed at $999.. You went all out there Mate , nice!!!!. How does the system run with 4 sticks & what speed and timings + voltage do you have these Monsters running at.. I have another set but I had so many issues...
  5. G

    Official ASUS P8P67 Series Overclocking Guide and Information

    As I said I've never messed with that low of a overclock , I would bet the house cat , truck & the Farm that if you went with say 44 you would stay around the same temps and close to the same voltage , yea you would need a bit of a bump , but 44 @ Regular LLC and + 0,025 offset should be a good...
  6. G

    Official ASUS P8P67 Series Overclocking Guide and Information

    I'm sorry mate use the - offset , my bad..:rolleyes: - 0.020 , keep playing with it till you get the voltage you want ... I never started my Overclock that low.
  7. G

    Official ASUS P8P67 Series Overclocking Guide and Information

    Well Load Line Calibration has to be included in the mix. Here's what I would do , Boot into Windows run LinX 0.6.4 , 20 Pass , say you have 8gb ram set Memory to 5120. If you pass lower your offset to 0.020 or if it fails up it to 0.035 and so on. AI Overclock Tuner - Manual BCLK/ Frequency -...
  8. G

    Official ASUS P8P67 Series Overclocking Guide and Information

    It didn't BSOD but on pass 2 on Linx it stopped with errors , so I went up to + 0.060 and no issues.. I didn't change a thing just set Optimized Defaults, flashed to 1502 Bios , booted to windows , Shutdown & cleared Cmos , set Optimized Defaults , Rebooted and set it up. I can pass every...
  9. G

    Official ASUS P8P67 Series Overclocking Guide and Information

    Things are starting to come together for me , Just passed a 20 pass with LinX 0.6.4 , IntelBurn Test v2 2.50. 1502 Bios Core i7 2600k Asus P8P67 Deluxe B3 Ai Overclock Tuner: Manual BCLK/PEG Freq: 100.0 Turbo Ratio: "45" Internal PLL Overvoltage: Disabled Memory Freq: DDR3-1866 MHz EPU Power...
  10. G

    Official ASUS P8P67 Series Overclocking Guide and Information

    LLC on HIGH and Offset @ + 0.060 = 1.393v - 1.4 under load on my board , how did you get LLC on HIGH and Offset @ + 0.060 = 1.368v under load :confused:
  11. G

    Official ASUS P8P67 Series Overclocking Guide and Information

    Are you still on the B2 board ? If so and you are going to get the B3 board you will see a difference in the 2 . Every setting I knew was stable on the B2 board will not run stable on the B3 . Your new settings look very close to mine also with all the testing I've done with LLC and Offset...
  12. G

    Official ASUS P8P67 Series Overclocking Guide and Information

    I have my 8 pin CPU from the psu routed behind my case with a extension cable of great quality that plugs into the 8 pin connection on the board.. I don't get what your trying to say to me Mate ???????? Switch WHAT.. Your on dope man..
  13. G

    Official ASUS P8P67 Series Overclocking Guide and Information

    I've switched my testing tools , IntelBurn Test v2 2.50 & AIDA64 Extreme and I'M error free , Passed no issues... Memtest Passed just fine.;) 1.30v max on load , 56c max on load with IntelBurn Test man that cooks the temps more than any others and I see It uses 96% of the ram while on max. Now...
  14. G

    Official ASUS P8P67 Series Overclocking Guide and Information

    Yes , It's set to enable.
  15. G

    Official ASUS P8P67 Series Overclocking Guide and Information

    Using the Additional Turbo Voltage and CPU Voltage Offset example for 48x multi... Old board: +0.005V offset, +.184 turbo VID New board: +0.030V offset, +.192 turbo VID For the Life of me I cant get anything stable with LLC on Regular , I'm using Medium .. The above are a starting point...
See more
Back
Top