Search results

Yes I played around with the 103 on the old board before the recall and had a stable Overclock as I wanted to get as close to 2000MHz on my Dominator GT CMT8GX3M2A2000C9 witch was 1922 I believe with a 103 BCLK. But now I just went with the 100 and 2133MHz .. I know the ROG board does well with...

Try a + 0.060 on the offset , Mine is at 0.040 but see what works for you. Load-Line Calibration: Medium That's the only difference between mine & yours.. Good luck

Running the test for at least 12 hours is recommended. That's from the web forums but I would do half that , say start it up a few hours before you hit the rack and keep a eye on things the first few than let it go till you awake.:o If you need a full license I have a few just fire me off a PM...

Wow what a sweet case , I looked at it some time ago and I do believe It was listed at $999.. You went all out there Mate , nice!!!!. How does the system run with 4 sticks & what speed and timings + voltage do you have these Monsters running at.. I have another set but I had so many issues...

As I said I've never messed with that low of a overclock , I would bet the house cat , truck & the Farm that if you went with say 44 you would stay around the same temps and close to the same voltage , yea you would need a bit of a bump , but 44 @ Regular LLC and + 0,025 offset should be a good...

I'm sorry mate use the - offset , my bad..:rolleyes: - 0.020 , keep playing with it till you get the voltage you want ... I never started my Overclock that low.

Well Load Line Calibration has to be included in the mix. Here's what I would do , Boot into Windows run LinX 0.6.4 , 20 Pass , say you have 8gb ram set Memory to 5120. If you pass lower your offset to 0.020 or if it fails up it to 0.035 and so on. AI Overclock Tuner - Manual BCLK/ Frequency -...

It didn't BSOD but on pass 2 on Linx it stopped with errors , so I went up to + 0.060 and no issues.. I didn't change a thing just set Optimized Defaults, flashed to 1502 Bios , booted to windows , Shutdown & cleared Cmos , set Optimized Defaults , Rebooted and set it up. I can pass every...

Things are starting to come together for me , Just passed a 20 pass with LinX 0.6.4 , IntelBurn Test v2 2.50. 1502 Bios Core i7 2600k Asus P8P67 Deluxe B3 Ai Overclock Tuner: Manual BCLK/PEG Freq: 100.0 Turbo Ratio: "45" Internal PLL Overvoltage: Disabled Memory Freq: DDR3-1866 MHz EPU Power...

LLC on HIGH and Offset @ + 0.060 = 1.393v - 1.4 under load on my board , how did you get LLC on HIGH and Offset @ + 0.060 = 1.368v under load :confused:

Are you still on the B2 board ? If so and you are going to get the B3 board you will see a difference in the 2 . Every setting I knew was stable on the B2 board will not run stable on the B3 . Your new settings look very close to mine also with all the testing I've done with LLC and Offset...

I have my 8 pin CPU from the psu routed behind my case with a extension cable of great quality that plugs into the 8 pin connection on the board.. I don't get what your trying to say to me Mate ???????? Switch WHAT.. Your on dope man..

I've switched my testing tools , IntelBurn Test v2 2.50 & AIDA64 Extreme and I'M error free , Passed no issues... Memtest Passed just fine.;) 1.30v max on load , 56c max on load with IntelBurn Test man that cooks the temps more than any others and I see It uses 96% of the ram while on max. Now...

Yes , It's set to enable.

Using the Additional Turbo Voltage and CPU Voltage Offset example for 48x multi... Old board: +0.005V offset, +.184 turbo VID New board: +0.030V offset, +.192 turbo VID For the Life of me I cant get anything stable with LLC on Regular , I'm using Medium .. The above are a starting point...

I also been trying Additional Turbo Voltage and with LLC on Regular (25%), offset to +0.030 and Additional Turbo Voltage to 0.180 one core failed worker stopped. went up to 0.192 with 00x0000124 bsod.. No luck for me and I seen some crazy voltage spikes , 1.44v +..

Yes mine is set to Medium as I just cant get any stability with it off no matter what offset voltage I use..

Failed right off the bat for me , I started Prime and 00x0000101 BSOD Back to the drawing board for me..:mad: BSOD Codes 0x124 = add/remove vcore or QPI/VTT voltage (usually Vcore, once it was QPI/VTT) 0x101 = add more vcore 0x50 = RAM timings/Frequency add DDR3 voltage or add QPI/VTT 0x1E =...

Hey silkysean are you using the B3 Board yet are you still on the B2 ? As for some reason there's a difference between the two for me anyway.. For example my B2 I could do 4.5 @ 1.31v Max , B3 needs 1.33-1.34 at least to pass prime for hrs. Thanks for all your Info Mate , It's hard to find...

What were the rest of your Bios settings ? I would like to give them a shot. 5.0GHz

Another test complete / 2 hours stable with Prime. P8P67 Deluxe B3 1305 Bios. AI Overclock Tuner - Manual BCLK/ Frequency - 100.0 All Cores - 45 PLL - Disable Memory - 1866MHz @8-9-8-24-2t EPU Power Saving - Disable Load-Line - High Phase Control - Extreme Dutry Control -Extreme CPU Current...

Yes for sure use + offset as he said and run Prime for a hour or so. If you don't get any errors lower the + offset one notch and run Prime again till you get errors and you will find the sweet spot..:cool: If you get a error right off the bat up it a notch. As with mine I went up to 0.080 and...

Yes that is true but that voltage is way too high for 4.5GHz.

Sorry Mate I cant read CPU-Z in those screenshots. Try http://www.postimage.org/ of just the window of CPU-Z.

I tried your settings at + 0.080 and 35 minutes into Prime I got a error on one core. Stable 5 hours Prime. 1.32 max on vcore , 51-53c max on 2 cores. AI Overclock Tuner - Manual BCLK/ Frequency - 103.0 All Cores - 44 PLL - Disable Memory - 1922MHz @ 9-10-9-27-2t EPU Power Saving - Disable...

What errors are you getting ? :eek: Set Optimized defaults SAVE AND REBOOT , enable C1E , C3 , C6 , Disable anything your not using Blue-tooth , Marvel , etc. set ram as below save and reboot . put your dvd or cd of memtest in player go to boot in bios and highlight boot over ride to your dvd...

Before I got my B3 Board It would run stable at 1.31v no matter what configuration I threw at it. I just did not get a great clocking chip , what can I say.:mad: That's what it takes for mine to pass prime for any amount of time , tried regular LLC and 35 min into prime failure on one core no...

Yes some nice points there , I do agree.. I just went about mine a different way. As I new my chip and board would run 4.5GHz @ 1.32v . So I tried different LLC configurations with the + offset .. Started at 0.080 and settled on 0.040 with Medium LLC as that was stable and got me to a 1.32v max...

Why would you disable everything and run a straight voltage all the time ? If you can clock down while not under stress.. If I run straight voltage on 4.5 GHz it needs 1.32v , so @ + 0.040 on the offset with medium LLC it hits 1.32 while on max then throttles down as I said. If you want to run a...

AI Overclock Tuner - Manual BCLK/ Frequency - 100.0 All Cores - 45 PLL - Disable Memory - Your Rated Speed EPU Power Saving - Disable Load-Line - Medium Phase Control - Optimized Dutry Control - T.Probe CPU Current Capability - 100% VRM Freq - 350 CPU Voltage - Offset + 0.040 DRAM - 1.50 - 1.65...

I also bought my board from Superbiiz , I contacted them when the issue with the board first broke. They told me I have to pay to ship it back to them plus a 15% re stocking fee. They are issuing refunds only per what the rep said// we have no Idea when this issue will be resolved.:eek: So...

Thanks for the info Mate , I have a friend that installed a FX Sound card in the top and two GPU'S in the next slots and he said they run at x16 . I will have to go look for myself as he could be BS my butt.. Thanks again..

Thanks Mate , I could of swore the video from Overclockers 3D I watched on youtube said dual x16.. I will have another look.:mad: 4 x PCIe 2.0 x16 (single @x16, dual @x8, triple @x8, x16, x16 ) ** Update ** I will just put a sound card or hd tv tunner in the top slot and 2 GTX 580'S...

Yes for sure I can not use my old stable settings on this B3 board , they just will not work. I even took apart my water cooled set up , Re seated the CPU, Re applied the TIM , just to be safe and no changes , as It runs 5-8c hotter also.. But I'm still trying all Kinds of configurations so we...

I hit 2133 MHz @ 1.65v 10-11-10-28 2t .. Ran prime for 1 hr with no issues .. Memtest also. Well my new B3 Asus P8P67 Deluxe arrived a few days ago and for sure does not Overclock the same as the old. I Just passed a 5 hour run with prime , also a 3 pass with Memtest. Bios 1305. ** Everything...

Well my new B3 Asus P8P67 Deluxe arrived a few days ago and for sure does not Overclock the same as the old. I Just passed a 5 hour run with prime , also a 3 pass with Memtest. Bios 1305. ** Everything else on Auto ** AI Overclock Tuner - Manual BCLK/ Frequency - 103.0 All Cores - 44 PLL -...

I got a great deal from MC $139 at set , that's why I picked them up. Not $220 as you said. I just looked and the price went up to $170.. Still not to bad I guess for that type of Memory.

Yes the QVL of memory for that board. I've seen a vid on youtube of it running on a P67. So that has answered my question.

Yes mine just came in also, :eek: Shocking , didn't expect anything till next week.. You want to have a good laugh after all this mess I think everyone needs too any how.. Read some or all of this , It did my soul some good for a change.:D Intel's Core i7-990X Extreme processor The new...

Yea they are trying , But can you imagine how many people in the USA are sending there boards back all at one time.:eek: That's a mess in it's self.. Not a job I want right now that's for sure.:mad:: I would like too see some #s , just for the heck of things..