• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Recent content by evoant

  1. E

    Maybe dead memory? safe to test?

  2. E

    Building a new machine with 1 Sata Drive only?

    the error messages the guy had on the 2 burn fails wasn't buffer underruns!! they were power calibration errors might be becouse of the poor power supply in the test machine? or is that another kinda a underrun error?
  3. E

    Building a new machine with 1 Sata Drive only?

    well at work i have a very poor system 900mhz celeron with 384mb ram this is a pretty old machine, they was looking in to buying a cd duplicator for a lad in the office, but they thought of building a new highspec machine with extra cdroms, to use neros multi-burner feature now on this...
  4. E

    My brothers new system wont turn on. HELP!

    firstly try reset your cmos put it back in to the normal postion and try boot, if that dont work shortage might be the problem this is why you should allways do a cardboard test before u put the board in the case simple get a large piece of cardboard (as this is a non conductive) place...
  5. E

    Building a new machine with 1 Sata Drive only?

    i have also read that you can get some motherboards that have 3 ide connections which would allow me to add 1 hdd and 5 cdroms i cant seem to find any boards that actualy have 3 on though, anyone know of any places to get one from
  6. E

    Building a new machine with 1 Sata Drive only?

    hello, i have been looking in to building a base unit that can burn multiple cd's at once using nero burning roms feature i first looked at buying a normal large tower case, with a average mboard along with a althon barton 2500 + 512mb ram, maybe a 1gb ram and3 cd burners, with a ata133...
  7. E

    Maybe dead memory? safe to test?

    what other programs is they i could test with? i dont have a floppy drive at the moment not a working one anyways any alternatives?
  8. E

    Maybe dead memory? safe to test?

    its crucial memory so lifetime warranty :D but i was wondering more that if it is a bad stick, and i put it in a working board is they any change of harming my board? or will it be ok and just not detect the stick or will it screw the board? i never had problems with memory before, so...
  9. E

    Maybe dead memory? safe to test?

    i think i might have a stick of dead memory i brought it first for a new machine build, due to the motherboard for that arriving DOA (crappy cheap board, now been replaced with a nf7 nforce2 dunno why i cut a corner in the first place) so i added the stick in to my old machine it wouldn't...
  10. E

    Dead Motherboard? Or Faulty Case Switchs?

    after reading up about the abit nf7 nforce2 says it supports Dual DDR 400 Dual DDR combines the power of DDR400 with two 64-bit independent memory controllers, the 128-bit memory controller integrated on chip provides up to 6.4 GB/sec bandwidth for system memory, and gives you highest...
  11. E

    Dead Motherboard? Or Faulty Case Switchs?

    my RMA request has allready been accepted, was just trying to test it first to see if it was anything my fault but i cant see why its dodgy like this i will be sending it back anyways, and gettin a different company last board i had was a MSI board, seemed ok i was looking at replacing it...
  12. E

    Dead Motherboard? Or Faulty Case Switchs?

    this board seems wierd i took everything out put board on cardboard, with cpu+heatsink before attaching any wires to the board i moved the jp1 jumper to clear cmos i left it for about a minute, then put it back to normal then attached psu and heatsink fan to board i also attached my...
  13. E

    9600XT or Fx5700?

    hhmm, dual monitor support.... gggrrrrrr why is building a new machine allways so damn difficult to choose bits for :( tight call, got me thinkin again, the more reviews i read the harder the choice gets, :( the 5700 i was lookin at wasn't a ultra, the ultra's also cost abit more...
  14. E

    9600XT or Fx5700?

    thats just being fussy not worth another £10 allready broke the £100 limit no more thanks everyone for the info, placing my order now :D Sapphire Radeon 128MB 9600XT DDR DVI-i TV-Out Lite Retail Box £102.25 inc VAT Now just need to wait for the rest of the toys to arrive :)
  15. E

    9600XT or Fx5700?

    its only for gaming, not modelling or anything so would they be much point gettin the 256 version?
See more
Back
Top