Recent content by DuceGT

It'd be cool if MSI would reply :p

Hmm, dont think so. Same results with only 1x512 stick and the single stick of Corsair...My memory timings are fine and are nothing to worry about.

everyone stumped or what?

Don't waste your money on water cooling that setup. I had my 2500+ XP-M at 2.4+ with stock HSF just fine

Depending on what you use your computer for, the XP's are just fine. You ordered the Mobile version so I asume you want to do some overclocking. If you have PC3200 (400fsb) RAM this is a very easy task to take the 2500+ 1.83ghz to 2.4ghz.

I've got myself a MSI K8N Neo2 and have recently traded my 3200+ (Maxed @ 2.5) for a 2.8+ 3000+. I am using 2x512 KingstonValueRAM PC3200. One stick is kingston branded while the other is inferion, but they work just fine in dual channel. The sticks are rated cas 3 at 200mhz, but they're 100%...

desperate bump -- nobody else had such an issue? i've heard stuff about the 166 divider being bad with ballstitics...is their any truth behind that? I guess I could being having a simmilar issue. I'll try to get my hands on some different PC3200 and leave a follow up.

wana trade memory? :D

I've tried both combinations for dual channel with the same results. ...And run the board at 400HTT :eek:

I sure will after all the work you put into it Eclipse. And yes, I reset the cmos to clear all the old settings and am now on my 3rd bios of tonight. 1.9b8mod -> 1.8 mod - > 1.37 mod -- all yeild the same results...I have some more info to add now. With a 1:2 Divider @ 1.6 actual vcore I...

[H]ello guys, Let me start off by specin' out the two rigs Rig #1 MSI Neo2 Plat 1.9b5 mod 0519CPJW 3200+ 2x512 PC3200 KingstonValueRAM Antec SmartPower SL350 21a@12v 6800NU (2) 160 IDE'rs (1) DVD-/+RW Rig #2 MSI Neo4 Plat 1.5 retial 0520PPMW 3000+ 2x512 PC3200...

did you recently update your bios? it could have been reading the temps wrong before...this issue makes no sense, so i wouldnt bother to analyze it too much

hey, pm me with ur results d00d... my 0519 was a bit of a dud. prime95 24 hour stable at 250x10 @ 1.47vcore, but fail after 10 minutes at 255x10 @ all the way up to 1.6vcore. all of this with HTT on 2x and a 1:2 mem divider...500mhz still aint bad tho :D

I had a sapphire 128mb version of the 9600 pro with crappy entech memory. Bone stock and with a later added Iceberg 4 gpu cooler the max stable gpu OC i could push was 465. I later did a lot of searching on google and randomly testing points on my card to prepare for a volt mod. The pro...