Recent content by Defyant

Time to install some hardware .....I forgot to mention this wont be a WC case ! The first "whoops" Came when i tried to install the SSD's! Some Screw on covers where made up The Choice of Cooler is the Assassin III but i'll be running it it triple fan mod with a 4th matching...

I remember this! one of my earliest case mods :D This was a very sort after case back then and cost a fortune. It's def an Antec CT !

Appols for getting slack! i should update more often..... A hell of a lot more wet sanding flat buff and shine work to all the panels. But the next step was to add some Grills to the top vents. These were never for air but for looks. Each vent had a template made and old car speaker...

Cheers Nobu tyvm mate 👍 I get a bit attached to the clean look of the frosted plex too! Cheers mashie tyvm great to hear from you again mate 👍 As pendragon1 said below, it is indeed spray can over primer using a 2k clear coat. I use a typical auto shop bought Acrylic can pain, i use a...

After laying down some colour and some clear then letting it dry over night. The psu cover gets a quick light sand. This is to get the clear as flat as poss for a quick buff. Normally i'd let this sit for a week to let the clear go rock hard. But i wanted to see what sort of mirror finish i...

We're on the home stretch now ! ..... well until i change my mind again Yesterday was all the boring stuff..... more sanding and spot putty work... but today was a bit more fun as i finally get to throw down some colour First the boring! Kinda like running around putting out all the little...

Couple of small updates and new additions I knocked this up in the add break, a lil cover for the PSU and a place to hide some cable. Then it was time for some mesh modding A bit of primer and spray putty put em together for a look see and test fit Another Update is the...

Almost done with this panel.. Fill a few ruff spots with spot putty a rub and final primer. First off was to get some primer down. Not sure what to call these things, but hopefully they look cool! i'll show the inspiration for adding these soon. A lot more sanding some more...

Some rear end action ! Defyant's Mods

A little meshify c i knocked up in the add break !

Thanks Fritzz mee too mate mee too ! i'm starting to feel a bit over this one :D Dare i say it again :P A bit more work to the front panel again today :D Just wanting to sort out the locking system and get the front near completed under primer and the vents painted.

A bit more work to the front panel today :)

Some Good news, Mwave have Jumped on board with some hardware for this build. A big thanks to the guys @ MWave for the support. GIGABYTE Z390 AORUS ELITE INTEL I7-9700K GIGABYTE GEFORCE RTX 2060 SUPER TEAM FORCE VULCAN 16GB 3200 INTEL 660P 512GB M.2 4 X SAMSUNG SSD'S Last but not least...

A bit of black satin to get a better idea. Still needs a lotta work to get all the lines even but for now i can move onto the second front.

Because i cant make up my mind what style of front i want for this case... i'll make 2 :) The first will be a grill type front.