• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Recent content by Danteashen

  1. D

    GTX 1070 no display and missing voltages

  2. D

    GTX 1070 no display and missing voltages

    i ve tracked the no voltage up to up9511, ENable pin is 0V on that chip so it's not powering on the rest of the card. but i don't know why
  3. D

    GTX 1070 no display and missing voltages

    hi ! i have a gtx 1070 gigabyte g1 with some missing voltages on all phases and mosfets except the first mosfets of each line i have 12v In but no output so can someone advise me please ? and help me diagnose that card because i've tried so many things (no soldering only diagnose with probes)...
  4. D

    GTX 1080 strix no output / 5V rail missing

    i ve found the buck controler in bottom (pgu1) and seems good voltage pass through it how do i know he s bad ? well i'm not sure but resistance to ground goes up and down really fast like 20ohms to 400 then go back to 55 ohms then 350 in a couple of second
  5. D

    GTX 1080 strix no output / 5V rail missing

    yeah i see the ITE i've checked these ones and nothing bad i think no short in diode mode and resistance seems good
  6. D

    GTX 1080 strix no output / 5V rail missing

    no problem in the first post i've said i'm new in that kind of thing, i'm trying to learn, i'm trying to read datasheets to know which value i need to check, making my own process here. maybe it's just the gpu but i want to be sure that it's not something else. and i found the controller in the...
  7. D

    GTX 1080 strix no output / 5V rail missing

    wow thanks the fact is, the board is powering on with fan spining and lights on ! i've got voltage at some points like 12v and others but that's just that area which i don't know don't get power ... can you tell me where the gpu memory controller is ? oh and when the card is on, the gpu die...
  8. D

    GTX 1080 strix no output / 5V rail missing

    between all of them i have 1.1 ohm. on all the vrm and vrams area i have between0.9 and 1.45 ohms everywhere
  9. D

    GTX 1080 strix no output / 5V rail missing

    yeay but the problem is i have 0.9 on all the row of inductor all grey ones (10 of them) so i don't understand
  10. D

    GTX 1080 strix no output / 5V rail missing

    i ve measured 0.9 ohms to ground for the two grey inductors on top is it that ?
  11. D

    GTX 1080 strix no output / 5V rail missing

    i've tested mosfets and they re goods no short nothing, what do you call a memory inductor terminal ? can you show me where it is ?
  12. D

    GTX 1080 strix no output / 5V rail missing

    so this is all measures i have so far i think it's possible memory mosfets on the top right are dead ? oh and the little blank square is 1.1 V
  13. D

    GTX 1080 strix no output / 5V rail missing

    i have 110ohm for 5v and for vram 400ohm
  14. D

    GTX 1080 strix no output / 5V rail missing

    but i'm having shorts in diode mode for all my vrams and little caps around them
  15. D

    GTX 1080 strix no output / 5V rail missing

    i can't remember exactly by head but i'll check tomorrow, but i'm pretty sure it was normal value
See more
Back
Top