• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Recent content by condition0

  1. C

    Vista clone problem

    thanks, got it working :)
  2. C

    Vista clone problem

    Thank you, I didnt know that Ghost can do that, will try if the other options didnt work out. Just want to confirm, I should leave the harddrive unpartitioned/formated, and use ghost partition to partition option then set the partition size?
  3. C

    Vista clone problem

    Thanks, now I know why it errorrd when I tried to restore an image. But the ghost partition copy didnt work as well :( I'll give TrueImage a try :)
  4. C

    Vista clone problem

    Hi Im trying to move my system from old harddrive to a new one. Im using AHCI mode on both of them. The system partition(C:) on the old drive is 40GB and the new system partition is 55GB. I made an image by Ghost and then restored the image to the new harddrive but it always fail at 75-80%...
  5. C

    Hope at last: DFI to make mATX crossfire/SLI boards

    :confused: they mentioned "CPU �� Socket-775 for Intel Core TM2 Quad, Core TM 2 Duo, Core TM2 Extreme �� Socket-775 for Intel Pentium® D"
  6. C

    G31/G33/Q35, whats the differences?

    thanks for the reply. Im just looking for a cheap matx as a back-up mobo (with some OC ability) so any of them will do the job then :)
  7. C

    G31/G33/Q35, whats the differences?

    hi, I have not been following the matx boards for a while and suddenly I saw all these new Gigabyte mobos and im not sure whats the differences between the chipsets. I have the G33M-DS2R, can someone give me a quick rundown on whats the differences between the G31/G33 and the Q35 chipset? thanks...
  8. C

    Raptor sudden drop in transfer rate, help

    thanks for the reply, I have run a few tests with the task manager, theres no processes taking up the resources while the hdtune is running. I have also noticed the transfer rate drop happens at each 20%, like theres a drop at 30% 50% 70% 90% or 20% 40% 60% etc, any ideas whats happening?
  9. C

    Raptor sudden drop in transfer rate, help

    i know what your saying but it shouldnt be as low as 3.5mb/sec? heres another screenshot a few days ago
  10. C

    Raptor sudden drop in transfer rate, help

    after a fresh vista install I noticed the suddent drop in transfer rate when testing with HDtune. This didnt occur a few days ago when I tested it when I install another hard drive. The only changes to my system is a fresh installed os, and I took the raptor out of the hdd cage, tried to silence...
  11. C

    BenQ G2400W

    anyone experiance flickering on the screen? it seems mine has a little flickering when brightness is below 50, i can only notice it on a white screen, not bad enough to make me uncomfortable (like the 2007wfp did) but it is noticeable, is this normal? should i contact benq for an exchange?
  12. C

    BenQ G2400W

    hi 10e, does the Spyder2 Express let you calibrate the monitor to a set brightness (100cd/m2)? after calibration does it give out a contrast reading? im using the i1 displayLT but it only let me calibrate the contrast then the RGB color..
  13. C

    calibration software that shows contract

    I have a i1 Display LT for calibrating my monitor but the bundled software only let me adjust the contrast/RGB and then create a ICC profile. just wondering what software can let me set the cd/m2 (I know the i1 display2 can) as well as give a reading of the contrast?
  14. C

    BenQ G2400W

    Thanks, I have tried that but it still recognised as 2407wfp. :confused: NVM, I'll re-install vista when I received the new 8800gtx :rolleyes:
  15. C

    BenQ G2400W

    just got mine delivered today, the picture looks very good to me. i'll calibrate it with i1 display later, just one question, how come my monitor shows up as Dell 2407WFP in the ATI ccc?
See more
Back
Top