• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Recent content by chibial

  1. C

    2500+ Sempron OC

    ya, i've switched back to the stock speed at 2500.. because i didnt have a 1/6 divider, running 180mhz was making my agp/pci clock run at 72/36mhz, which is fairly close to spec but noticed when i was playing games that things were running incredibly slower. turns out i guess w/o a 1/6...
  2. C

    2500+ Sempron OC

    hm... linjy2: was that ecs board a via chipset or a nforce2 chipset? thats funny that you mention too because i got this combo at frys also, but it was with a abit board so i felt a little better about buying it rather than getting a doa ecs. what kinda timings did that samsung ram have...
  3. C

    2500+ Sempron OC

    =( sigh.. any other suggestions? or is doing a volt/pin mod my only choice to get it running at 200fsb with stable pci/agp speeds?
  4. C

    2500+ Sempron OC

    oh ya, btw.. i know increasing the fsb to numbers other than 133,166,200 might cause instability issues with the pci/agp clock. i know certain boards had them locked.. if i keep it at 180, is the pci/agp clock locked on my board?? abit va-20: its a via KM400a + vt8237 board.
  5. C

    2500+ Sempron OC

    so if i bump up the vcore somehow, it will overclock at 200fsb? i can do the pin mod where i short 2 holes on the socket. think that'll do much? what should i bump up the vcore to? right now im running 1.536v i dont wanna bump it up too high where im frying the cpu.
  6. C

    2500+ Sempron OC

    nah it wont let me touch it. the only thing i can bump up are the dimm voltage settings. Dimm Voltage Adjust: 2.54, 2.58, 2.63, 2.67V its running at 2.58 right now.. guess thats the problem with microATX boards. anyways. any idea what i should do from here?
  7. C

    AMD Sempron 2500+ OC

    can a mod delete, i posted in the wrong forum and have reposted in the overlocking forum.
  8. C

    2500+ Sempron OC

    Anyone know what i should do to overclock this system, i have a AMD Sempron 2500+ with a Abit VA-20 microATX board. im running 2x512 corsair valueselect ram cas 2.5 latency. pc 3200 the sempron stock runs 10.5x166. im trying to get it to run at 10.5x200 but it wont post at all, neither...
  9. C

    AMD Sempron 2500+ OC

    Anyone know what i should do to overclock this system, i have a AMD Sempron 2500+ with a Abit VA-20 microATX board. im running 2x512 corsair valueselect ram cas 2.5 latency. pc 3200 the sempron stock runs 10.5x166. im trying to get it to run at 10.5x200 but it wont post at all, neither...
See more
Back
Top