Recent content by CalinTamaian

As far as I've know/read the 390 and 590 have the same panel. I went with 590 because I was concerned about the front electronic part after debezeling. (present on 390; 590 has it in the back) Yes, I debezeled it and then used epoxy + double table + some band for the VESA mount. I plan to have...

Thank you reply! I haven't bought any MST hub yet.I am not sure if it's a typo, but the one you suggested splits DP into 3 x DP outputs , not 3 x HDMI outputs. Club3D CSV-5300H, is a good option but I still need the DP - HDMI adapters... or I understood something wrong? Thank you. Edit...

Hello to everyone, I am planning a 5 monitor portrait setup in Eyefinity. I use Samsung S24D590PL. As Video cards I plan 2x R9 290X in crossfire. Monitor Inputs: 2 x HDMI, VGA Video card outputs : 2 x DVI , 1 X HDMI , 1 X DP Connectivity in mind: Monitor 1 - DVI to HDMI cable...

Debezeling is not easy. If you plan to use Landscape I would probably use them as it is. The initial bezel is around 8.6 mm. I have currently 3 x Landscape with them; 1 sits without purpose ; 1 is debezeled with VESA glued with epoxy. Need to wait another 10 hours or so for the epoxy to dry. I...

Dell U2414H is a good monitor. It does have the Display port issue, but if you use the HDMI input you should be fine. It also has 6 mm bezel which is world's smallest bezel (without debezeling). It has great colors (saw live multiple models) and the design is very good. For a single/double...

Figured it out eventually. There are some screws holding the lower bezel. You have to force the back plastic down. It will come down after putting some pressure with a screwdriver. After that you get access to the screws that hold the lower bezel. There is still a white plastic that...

I have a S24D590PL. I don't have this problem (it goes to sleep but wakes up when I press any key/mouse). I am using the HDMI input. From what I've seen so far is a Display Port problem (Dell has it as well with their models; check their forums; full of people complaining). To test, I would...

I tried to debezel the S24D590 but cracked the bottom part. I did debezel several monitors in the past, but it was way easier. I cannot take the bottom part down. The upper and left/right sides went down ok (still harder then a "normal" debezel). The bezel after debezeling is around 3-4 mm on...

Do you have some pictures? How difficult was to remove the matte film? Thanks.

Yes, but I want a 5 monitor portrait setup.Samsung has a 8.4 mm bezel top and bottom. After debezeling I would get less. U2414H has a big bezel down, and debezeling seems rather difficult due to electronics placement. Samsung S24D590PL would be nice, but I need someone that owns one that...

If I make my own stand, is it possible to make the image display in portrait mode? (e.g. use window keys) Thank you.

I need to know if the monitor supports portrait mode. I cannot find in local stores and it would be good to know before I order it online .... Thank you.

I will go with eVGA. Saw a very good review on johnnyguru and the price beats Seasonic with around 35%. All doubts were removed when I saw the 10 year warranty ...

Hello, I am building a new rig and cannot decide on the power supply. CPU: i7 - 4770k GPU: 2 x 280x Matrix (375 W rated each) HDD : 2x SSD Samsung , 2 x WD 2T Case 4+ fans, Watercooling, some LED's for modding I was looking into Corsair RM 1000 W (has pretty good the price/...

6 mm is the lowest you can find on the market without debezeling. That is for the U2414H (IPS). Asus has 6 mm as well but it is a TN. Acer has a very good price for H236HL , but no VESA mount: http://www.youtube.com/watch?v=ODGn3I9BIAo If you are looking for 3 x landscape all the...