Yea, I had it with thermal paste and everything. It was running while I was testing it at around 30 C so heat couldn't be the problem. Must be a short somewhere somehow. I'm hoping it's the CPU but I won't know for sure until another 2 days since I just ordered another cheap 200 series...
I assumed the same but after throwing in the RAM from my main setup it still wouldn't post. I'm gonna throw that RAM i've been using to test into my main and see if it'll read but doesn't seem like that's the issue at this point.
Not out of the box right? I've read it requires some modifications for it to work but not out of the box. So i still wouldn't POST if that's the case with a 300 series chip in. Correct me if I'm wrong on this one because I'm about to be a 200 series chip
Nothing was upside down, I double checked. I didn't plug a PCI-E connector to the CPU port. I made sure it was the CPU connector.
From what I've read 300 series CPU isn't backwards compatible on 200 series motherboard.
Link here saying that...
Not using adapters, the SATA data wire got hot yes. EVGA 750W GQ, EVGA 650W Gold G3, and EVGA 850W G2. I only had the CPU and motherboard plugged in at first but I also tried one with the SSD and VGA. I know i didn't need SSD to post but just thought I'd try and I regret it.
Now that I looked...
I was testing my motherboards yesterday and used an Intel G4400 I use for simple tests and as I was restarting the system it all of the sudden wouldn't turn back on and kept trying to post. It would constantly loop from trying to post and restarting, I could just see the fans spinning up and...