Update.. Just got the new NAS box built and drives moved over. It was a snap. So far between the integrated Intel NIC and the 16GB of RAM I've picked up a significant network throughput increase. Pretty happy with this upgrade.. server grade hardware now.
ok, well just bought a Crucial 16GB kit from Newegg and found a 10% off coupon.. $153 isn't horrible but not the cheap $115 I paid for the other stuff. Back to eBay it goes. Also just purchased a 250w Seasonic PSU.
I just called Tyan, its an error on the website.. go figure. So will it most likely not even post with the reg memory or should I go ahead and order the unbuffered stuff?
so do the 4th gen i3s support the Reg then? They don't specify in the memory compatibility list. http://www.tyan.com/support_download_memory.aspx?model=S.S5533
well shoot, it is a 16GB Hynix Reg ECC kit, but I was looking at the memory compatibility list on Tyan's site and they have some other 8GB Reg ECC modules listed for this board even though they say unbuffered on the spec sheet.. do you know something I don't?
Well, after finally losing sleep at night over not having ECC ram in my current NAS box I bit the bullet and ordered some new hardware
TYAN (S5533) Mini-ITX 1150 Server board
16GB ECC PC3-12800 Memory
Xeon E3-1220 v3
Norco ITX-S4 case
This is double the ram and slightly faster CPU than...
I would go ahead and start moving data now but during some testing I noticed when I put in the pci-e sata card and sdd that it shifted the drive names from ad0-3 to ad1-4 since the ssd took ad0. The array seemed to still function correctly but it looked to be confused since the drives listed in...
I agree that RAM is magnitudes faster than a SATA3 attached SSD, but with the bottleneck of all NAS devices being the network interface, as long as the cache is faster than ~120MB/s "for a single GigE" I would think the IOPS improvement of even slower flash based memory over RAM would be...
well if/when I find a good deal on a couple 8GB sticks I'll put 16GB into it.. but for now it is what it is. So you are saying adding the SSD cache would be detrimental to the system?
So I've squeezed all 4 drives in this mini ITX case "only has two internal 3.5" slots. I am actually surprised, it only draws 54 watts with 4 drives idle. It used that much power with two drives and the old C2D motherboard. So I setup the drives in Raidz2 and copied a large folder "130GB" of...
I am running a very light install of Win8 with Server 2012 dedup right now on 8x 2TB F4s.. its a server case with redundant PSUs, lots of fans, not a bad thing for a NAS but overkill really. I want a new simple setup in this small cube case. I like the classic FreeNAS "NAS4Free now" interface...
I'll start this new machine off with 8GB of RAM but may put 16GB in the future.. I'm leaning towards RaidZ2 for the slightly better redundancy odds, and I should have more than enough CPU to handle parity.. I'm not sure which would be more benificial, SSD L2ARC or Intel server NIC instead of the...