Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.
I have run more tests today.
I have removed the "pull" fan off of the Megahalem, and I have set the 3 180mm intake fans on "high".
I also have put back the exhaust fan at 12V.
Idle: 32 °C
Kombustor 5': 59 °C
Kombustor 10': 71 °C
Kombustor 20': 77 °C
Obviously, higher airflow helps, but the...
I would be glad to have you over in my dedicated thread for further debating of this issue ;)
Indeed they would not be the first company to silently have such practices. That would be a huge disappointment.
Wow that's great to have that many answers ! Thanks guys !
I have a very similar setup :
FT02, stock AP181 on low settings, stock exhaust fan, no case mods
I've got 2 extension cards, 1 Asus Essence ST and 1 WiFi PCI card
i5 2500k, Megahalems, Gentle Typhoon AP14 undervolted in push / pull...
It seems that, indeed, the Xonar Control Center has direct control over Win 7 settings, i.e. when I switch to x channels in Xonar CC, the settings in the preference panel of Windows automatically updates to match the desired settings.
Thanks for your help.
I've run some tests also, and came to the opposite conclusion, at least as far as GPU temps are concerned.
I've made my report in this thread.
Long story short :
In usual, horizontal position :
Idle : 33 °C
Kombustor 5 min : 57 °C
Kombustor 10 min : 57 °C
Kombustor 20 min : 57...
Hi all,
First, I don't know if it's the right place to post this, so if the thread needs to be moved, please do so.
I wanted to report my experience of using Thermalright's Shaman VGA cooler in a 90° rotated environment like Silverstone's Fortress FT02 case.
Put simply, it does not work...
That's of great value to me thanks for your detailed reply !
Are you sure ? I've read in some posts that one had to set some things in there to get better sound quality...Like "checking" all speakers, "full range" etc.
I'll try those settings tonight when I get home. I'm very excited ! Plus I...
Hello everyone,
I recently acquired an Asus Essence ST.
Coming from "plug and play" onboard sound, I must say I am a bit confused with all the options and tick-boxes one can find in the asus driver.
I am mostly gaming on my PC, but I am also listening to music from time to time. Only...
I was asking myself questions about that proc temps also.
I've just bought one, and mounted it in a FT02 case with Megahalem rev B, push pull config.
It's overclocked at 4.5 stable, 1.33 Vcore.
Ambiant temp is 25 / 26 °C.
At idle, the proc gets up to 30 - 35 °C.
Under load (Crysis...
Hi
I was asking myself the same question about HD 6970 temps.
I just bought a Sapphire HD 6970 rev 2 (blue PCB), on which I installed a Shaman cooler.
I overclocked the card to 950 / 1450 in CCC (stock voltage).
During a 20 min Kombustor stress test, the temps rise up till 85+ °C (and seem...
For the record, my final build is the following. Thanks all for your help !
230 - Silverstone Fortress FT02B
148 - MSI P67A-GD55 (Révision B3)
193 - Intel Core i5 2500K
51 - Prolimatech Megahalems rev.B
21 - Noctua NF-P12
90 - G.Skill Kit Extreme3 2 x 4 Go PC10600...
That is great first-hand information. Thank you very much !
I'll go Essence + Denon AH-D2000 (25 ohm) as a first step, and when I want to upgrade to high impedence headphones, I'll add an E9 in the stream.
Thank you very much rive22.
So you confirm that the E9 does a better job at amping than the built-in headphone amp of the STX ?
I might as well get a Xonar DX + E9 rather than an STX then...