• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Recent content by Animal

  1. A

    FS: Nintendo Wii, NIB

    Dont have any pics. It's just a normal Nintendo Wii box. Never opened, but the simplistic clean box design sure tempts me to open it :) Whats included? Is the warranty void? I want a 360 but they are prone to failure so I'd be afraid to have one with no warranty.
  2. A

    FS: Nintendo Wii, NIB

    Alright then, post edited.
  3. A

    FS: Nintendo Wii, NIB

    Nintendo Wii. Box never opened. $350 with 50% shipping to the US (we split 50/50 you pay shipping if outside the US) Will take money order or PayPal
  4. A

    TuniqTower120

    Great cooler, I can run my E6400 @ 3,600Mhz 6 hour Orthos stable with it. On scorching Puerto Rican ambient temps.
  5. A

    Tuniq Tower - Thermal Grease that comes with it.

    Use AS5. The included paste is too thick for effective application. I had issues with it which were solved with AS5.
  6. A

    6 Months on and... ?

    So when are we gonna see the first wave?
  7. A

    e6600 on 3.4 - how safe is it for 0/24

    Right, as long as the voltage is below 1.6v with the temperatures below 70c it'll endure.
  8. A

    NVIDIA's overclocking guide and C2D's max adviced voltage

    Here is NVIDIA's very thorough overclocking guide. A nice document. In the Maximum Recommended Voltages they advice that the safe limit for a Core 2 Duo is a whooping 1.5875. I would not enjoy subjecting my E6400, which I'm running at 1.5v, to near 1.6, but apparently some people have had...
  9. A

    Tuniq Tower 120 users - dump the bundled paste and use AS5

    Huh? The warning signs would be crashes and bad Orthos. I thought this was easy to comprehend. With the air conditioner on and improved circulation its now down to 57c under load, but idle is pretty much the same at around 48c. 1.5v and 57c average under Orthos load is not tremendous...
  10. A

    Tuniq Tower 120 users - dump the bundled paste and use AS5

    Well, remember these are Core Temp temperatures. Ambient temperature is very high here in Puerto Rico. Even at lower settings it'll still run warm. I went back to 3.2 with 1.38 and it is just a few degrees cooler.To get the temperatures you guys find acceptable I'd have to run at stock. At...
  11. A

    Tuniq Tower 120 users - dump the bundled paste and use AS5

    1.5v is a lot of voltage, but what do I care as long as its Orthos stable below 70c. 3.6Ghz is sweet :)
  12. A

    Tuniq Tower 120 users - dump the bundled paste and use AS5

    -edit 2- The paste is settling in, and with the air conditioner on, I get 46c average idle, 57c average under load at 1.5v (3.6Ghz) I've been running a Core 2 Duo E6400 for a few weeks now overclocked to 3.2Ghz with 1.38v core voltage (1.34v real), and my Core Temp measured around 55c idle...
  13. A

    The 680i

    My eVGA 680i is the most stable motherboard I have ever owned.
  14. A

    A few questions (680i + E6400)

    Alright, I'm running at 3.2Ghz stable for 6 Orthos hours with voltage set at 1.38. At the moment trying to reach 3.4Ghz with voltage set to 1.42. E6400, 680i, G.Skill DDRII800. 1.) About the temperatures: Ambient temperature 27c, sometimes as high as 32c (Puerto Rico) Tuniq Tower 120...
  15. A

    EVGA i680 problems?

    Same for me.
See more
Back
Top