My temps are still perfect, even on hot summer days.
Yes I meant the HDPlex 8 heat pipe heat sink.
As for the shims, I used them behind the aluminum blocks, so the material is irrelevant, you just need to drill a hole for the screw to fit trough.
I first used pieces of thin wood for testing and that worked just fine. The order is as follows black standing mount =>shim=>aluminium block=>paste=>panel.
And I really would use paste, buy lots you will need it.
If you don't use the pcie slot, you could use that mobo with the lh6, just go to the opposite panel.
Yes I meant the HDPlex 8 heat pipe heat sink.
As for the shims, I used them behind the aluminum blocks, so the material is irrelevant, you just need to drill a hole for the screw to fit trough.
I first used pieces of thin wood for testing and that worked just fine. The order is as follows black standing mount =>shim=>aluminium block=>paste=>panel.
And I really would use paste, buy lots you will need it.
If you don't use the pcie slot, you could use that mobo with the lh6, just go to the opposite panel.