Origami-Inspired Shield Absorbs Handgun Bullets

Megalith

24-bit/48kHz
Joined
Aug 20, 2006
Messages
13,000
Brigham Young University engineers have crafted an incredible alternative to steel-based bulletproof barriers, which generally weigh close to 100 pounds and are impractical to lug around. Taking inspiration from origami, this shield not only weighs half as light but is fully effective in stopping bullets (of the 9 mm, .357 Magnum, and .44 Magnum variety, at least). They can also be expanded in about five seconds.

The barrier Howell and his colleagues designed is made of 12 layers of bulletproof Kevlar and weighs only 55 pounds (many of the steel-based barriers in current use approach 100 pounds). The BYU-built barrier uses a Yoshimura origami crease pattern to expand around an officer, providing protection on the side in addition to protecting them in the front. In testing, the barrier successfully stopped bullets from 9 mm, .357 Magnum and .44 Magnum pistols.“Those are significant handguns with power,” Howell said. “We suspected that something as large as a .44 Magnum would actually tip it over, but that didn’t happen. The barrier is very stable, even with large bullets hitting it.”
 
Last edited:
Brigham Young University engineers have crafted an incredible alternative to steel-based bulletproof barriers, which generally weigh close to 100 pounds and are impractical to lug around. Taking inspiration from origami, this shield not only weighs half as light but is fully effective in stopping bullets (of the 9 mm, .357 Magnum, and .44 Magnum variety, at least). They can also be expanded in about five seconds.

"It only weighs half of half as much as I should like and it cost half of half as much as it deserves."

92be41e1041e6730a4b3e7c74a5f63c3.jpg
 
im sure a 50+lb piece of metal and Kevlar will stay in place...
An empty oil barrel can topple over on a windy day, this sail-like barrier looks like it would do cartwheels in a 10 mph wind. I might be wrong though, not knocking down what these guys made, am just mouthing my mind.
 
I'm curious how it is dealing with the deformation issue. Unsupported kevlar is pretty easily penetrated. Is it the aluminum sandwiched in, or the frame tensioning it doing that job?
 
Definitely a cool idea. Wasn't overly impressed until it said it stopped a .44. That's a powerful bullet at the ranges they were testing. Though I couldn't help but note they were firing out of a snubby little barrel instead of something with a 6 or 7 inch that would give it a little more velocity and energy.

Still though, very cool.

Wonder if it's any good at all against rifle calibers. Doubt it, but would still like to see the testing.
 
It's a neat idea but those bullets were going super slow. I wonder how it would hold up against full speed rounds...
 
Wonder if it's any good at all against rifle calibers. Doubt it, but would still like to see the testing.

No way. A .308 Winchester bullet carries about the same energy at 1000 yards as a .357 Mag at point blank range. However, for law enforcement, they would normally be going up against thugs who are using the easily sourced 9mm, .40, .45, .357, etc. But I'm not sure I'd want to necessarily take my chances, not knowing what the bad guy is using.
 
I think a better idea is using hardened aluminum/ar500 plates in that angled configuration to fragment the bullet and Kevlar layers behind that to catch the fragments
 
From Nova: Origami Revolution if anyone wants to watch the entire show. I freaking love the solar panel designs they came up with.

 
I want to see what this thing does under fire from an ak-47 or ar-15.

It would hold up fine against a drug dealer with a pistol shoved in his underwear, but what about a bank robbery or hostage situation?
 
Back
Top