DAN A4-SFX: The smallest gaming case in the world

AFAIK the ECC-feature won't work, but you still have a chance that UDIMM ECC sticks can be used without the ECC feature. With RDIMM and RDIMM ECC you don't have this chance. I hope I'm not speaking rubbish :D

I think the system will not even post.

I think I found a cooler that could work with the ram and a 120MM fan on top with 4 pipes dirrectly on the cpu like the nexus low-7000

dNb8s8F.jpg


RlaDHuP.jpg


RMeMaK9.jpg
 

This was the funniest cooler shopping experience I had these days. Amazons shows me the cooler costs 71CAD with shipping and I thought the CAD was as strong of a currency as the USD. Therefore I thought this costs way more than I expected.
Then I came to the checkout and Amazons converts CAD to CHF (Swiss Franks) and it costs only 56CHF. Seems like the CAD isn't worth all that much (luckily) xD
 
As an Amazon Associate, HardForum may earn from qualifying purchases.
iPhone 7 Plus and it's a protective cover for a Dell TFT monitor, nothing special...

Yeah, but still good photos, I think was SLR camera.

And the bag just was remembers me the bag to protect proyectors, I haven´t think a lot of things uses similar bags :banghead:

Thanks again for your time ;)

I think the system will not even post.
I think I found a cooler that could work with the ram and a 120MM fan on top with 4 pipes dirrectly on the cpu like the nexus low-7000

What cooler is that?
 
Well, an idea discussed in the thread is to slap a bigger slim fan on it, like these 140mm fans:

https://www.amazon.com/SilverStone-Technology-Super-Cooling-FW141/dp/B00VBNTB8C (13mm tall)

https://www.newegg.com/Product/Product.aspx?Item=9SIA4UF1H80572 (13mm)

https://www.newegg.com/Product/Product.aspx?Item=9SIA66Z28S3552 (13mm)

https://www.amazon.com/Thermalright-TY-14013/dp/B00G8GUE74 (13mm)

There are also some 12mm tall, 120mm Scythe fans:

https://www.amazon.com/Scythe-Slip-Stream-SY1212SL12H-120mm/dp/B002CYRROY (12mm, 3 pin, there are different versions with different max RPM's, this is 2000 RPM)

Or a 100mm 12mm Scythe fan, this interestingly has 92mm mounting holes also, so you could try it on the L9i, although not sure if it is actually any better than the A9.

https://www.amazon.com/dp/B006A7W5W...TF8&colid=1WRNCWC7ZJDK1&coliid=I3PCLV6JF42H3H

The above fans at 12mm and 13mm also add ~2-3 more mm of clearance than the stock C7 fan, which is 15mm, and thus may mitigate the turbulence issue further. The c7 heatsink is about 32mm tall. Until someone tests all this out though, this is all just guesswork. But, the C7 heatsink seems to do a better job than the L9i, so a solution with the C7 remains worthwhile for those of us with 7700K chips as opposed to just abandoning it in favor of the Noctua...

There are a whole bunch of 15mm 120 and 140mm fans also. At 15mm on top of the C7 you're back at 47mm and right up against the side panel (48mm clearance), but the theory is less RPM for same airflow mitigates the turbulence.

However you have to consider RAM clearance and any clearance of any other heatsinks or the IO ports, like the VRM heatsink (or whatever that is over the IO ports) on the Asus Z270I, which is 38mm high. I don't believe 140mm will actually fit in the case with the Asus mobo thanks to that damn heatsink, which is in the way. Also you probably want RAM that either has no heatspreaders, or "low profile" heatspreaders like Corsair LPX RAM, which is 31mm, or just take them off. (I have Team Vulcan RAM which is 31.75mm, which barely should fit...)

Of course the easiest solution is to just say screw all of that and get the L9i... I wouldn't blame anyone for that either. ;)


I'm replying to this as a thanks, to mark it later for when I shop a better fan, and to also ask the question how people would go about mounting a 140mm fan to the c7, which is as big as a 92mm fan. Yes, I realize zip ties would be used, but beyond that I'd like to see some pics.
 
Last edited:
As an Amazon Associate, HardForum may earn from qualifying purchases.
  • Like
Reactions: Jspr
like this
This was the funniest cooler shopping experience I had these days. Amazons shows me the cooler costs 71CAD with shipping and I thought the CAD was as strong of a currency as the USD. Therefore I thought this costs way more than I expected.
Then I came to the checkout and Amazons converts CAD to CHF (Swiss Franks) and it costs only 56CHF. Seems like the CAD isn't worth all that much (luckily) xD

For me too... 56 € for France.
 
Will the nexus fit in the z270i strix with normal height ram?

Has anybody thought of adding extra heat pipes to any heatsink?
 
Yeah my bad it's 57mm with 15 slim 120mm fan...forget it . it was the akasa nero lx 2

Yes the best low profile coolers with 120 mm fans are 57-58 mm.

For me it have not do anything of the case been 10 mm widther to get in a better CPU cooler.
 
Last edited:
AFAIK the ECC-feature won't work, but you still have a chance that UDIMM ECC sticks can be used without the ECC feature. With RDIMM and RDIMM ECC you don't have this chance. I hope I'm not speaking rubbish :D

I think you are correct, if they would just be ECC RAM it would work but ECC wouldn't work on a desktop board. These are registered DIMMs though, they won't work at all on a desktop board.
 
You could always buy well known ram with a heat spreader, heat up the heat spreader with a heat gun or a hairdryer, then remove the heat spreader yourself, the G.skill Trident Z's heat spreaders look easy to take off:

http://aphnetworks.com/reviews/g-skill-trident-z-f4-3200c16d-16gtz-2x8gb/2

Also i have found a seller of the Nexus LOW-7000 R2 that does worldwide shipping, seems like they are shipped from USA and arrive within a few weeks, its quite expensive though:

http://www.fishpond.com.au/Electron...ow-Profile-Universal-CPU-Cooler/9999666782218

The Nexus on that Canadian amazon store says it wont be delivered until may or june, is anyone else getting that shipping estimate?
 
The Nexus is nearly end of life and is hard to get it, so i thought about developing my own heatsink.
The heatsink will be very similar to the Nexus, but with more heatsinks and the option to mount a 120mm fan under it. It will include a bracket to shift the fan if you don't have low profile ram. I think about Noctua as manufacturer.

Will be somebody interested in something like this?
 
Last edited:
The Nexus is nearly end of life and is hard to get it, so i thought about developing my own heatsink.
The heatsink will be very similar to the Nexus, but with more heatsinks and the option to mount a 120mm fan under it. It will include a bracket to shift the fan if you don't have low profile ram. I think about Noctua as manufacturer.

Will be somebody interested in something like this?
Can you make it 47mm in height or smaller? And will it be 100% copper? If so I am interested. The other alternatives are 70$+ and lots of people are looking for good air coolers under 48mm.
 
Last edited:
I would certainly be interested in that dondan, if you can design a case this awesome and intricate you should be able to do an amazing job designing a cooler.

I think i might stick with the cooltek LP53 + NF-A9x14 PWM for now and wait for a cooler better designed to fit in this case
 
I would certainly be interested in that dondan, if you can design a case this awesome and intricate you should be able to do an amazing job designing a cooler.

I think i might stick with the cooltek LP53 + NF-A9x14 PWM for now and wait for a cooler better designed to fit in this case


I am planning on getting the cooltek LP53 + NF-A9x14 as well if there is no other alternative that is under 47mm height. In fact in the thread for sentry case backers that has around 922 backers there is huge demand for a decent cpu cooler under 47mm height, specially if it can handle 95w. Ask the same question in that thread and I am sure you will get more than 20 people interested.

I mean for US buyers the cooltek LP53 + NF-A9x14 combination is easily a 70$ purchase.
 
The Nexus is nearly end of life and is hard to get it, so i thought about developing my own heatsink.
The heatsink will be very similar to the Nexus, but with more heatsinks and the option to mount a 120mm fan under it. It will include a bracket to shift the fan if you don't have low profile ram. I think about Noctua as manufacturer.

Will be somebody interested in something like this?

Really interested should i be if it performs like the Nexus cooler or Thermal right AXP100 and fit in your case.

Can easy pay up to 80 Euro for a quality cooler.

And think of ram clearance to so its possible to use like Corsair LPX or Crucial Ballistic sports.

http://eu.crucial.com/eur/en/bls2c8g4d240fsa
 
Last edited:
The Nexus is nearly end of life and is hard to get it, so i thought about developing my own heatsink.
The heatsink will be very similar to the Nexus, but with more heatsinks and the option to mount a 120mm fan under it. It will include a bracket to shift the fan if you don't have low profile ram. I think about Noctua as manufacturer.

Will be somebody interested in something like this?

Yes ! As long it will handle a stock i7 and be as silent as possible, i am in. Just finished my build, have to keep my cpu 4790k at the minimum voltage 1.05v so the C7 doesn't become a Ferrari :)
Even at 100 $/pounds - we already are in a niche market so if money is the only price to pay literally far maximum quality, silence and performance, i for one, will pay.
 
I will do custom cables myself when I get the time. You don't really know how much extra you need for bends etcetera.

This is my estimation.

Shortest way
24pin 10 cm
8pin CPU 20 cm
8pin GPU 20 cm (Depends on how you will route it. I did it behind the GPU and PSU)
Edit: Sleeved cables would probably not be able to be routed between the GPU and PSU.

Estimation to fit
24pin 15 cm
8pin CPU 25cm
8pin GPU 25 cm

ankfajpwltlhcqj.jpg


Really big help on your Estimates on cables there.

150 mm, 24 pin
250 mm, 8 Pin
250 mm , Pcie

Are this lengths confirmed ??

I also wounder how long Sata power i need for a front SSD from SF600 Lenght on cable ??
 
Last edited:
The Nexus is nearly end of life and is hard to get it, so i thought about developing my own heatsink.
The heatsink will be very similar to the Nexus, but with more heatsinks and the option to mount a 120mm fan under it. It will include a bracket to shift the fan if you don't have low profile ram. I think about Noctua as manufacturer.

Will be somebody interested in something like this?

Sounds like a great idea.
 
The Nexus is nearly end of life and is hard to get it, so i thought about developing my own heatsink.
The heatsink will be very similar to the Nexus, but with more heatsinks and the option to mount a 120mm fan under it. It will include a bracket to shift the fan if you don't have low profile ram. I think about Noctua as manufacturer.

Will be somebody interested in something like this?
YOU BET!
 
The Nexus is nearly end of life and is hard to get it, so i thought about developing my own heatsink.
The heatsink will be very similar to the Nexus, but with more heatsinks and the option to mount a 120mm fan under it. It will include a bracket to shift the fan if you don't have low profile ram. I think about Noctua as manufacturer.

Will be somebody interested in something like this?

Well if you are going fully custom anyway you might as well make the top part 170x170 and extend above the GPU slot or even further, which you couldn't do in with any other case that does not use a riser card. Also I would kind of appreciate a black (and maybe silver) option, just like the case, instead of the Noctua standard colors. They will probably like it if you don't use their "CI" anyway. Damn the longer I think about it the more I want a full copper, nickel platted, MONSTER heatsink in that case.
 
The Nexus is nearly end of life and is hard to get it, so i thought about developing my own heatsink.
The heatsink will be very similar to the Nexus, but with more heatsinks and the option to mount a 120mm fan under it. It will include a bracket to shift the fan if you don't have low profile ram. I think about Noctua as manufacturer.

Will be somebody interested in something like this?

As much as I'm interested, I'm very weary of blindly trusting you with coolers after already buying a c7 based on your recomendation.
 
As much as I'm interested, I'm very weary of blindly trusting you with coolers after already buying a c7 based on your recomendation.
LOL
The Nexus is nearly end of life and is hard to get it, so i thought about developing my own heatsink.
The heatsink will be very similar to the Nexus, but with more heatsinks and the option to mount a 120mm fan under it. It will include a bracket to shift the fan if you don't have low profile ram. I think about Noctua as manufacturer.

Will be somebody interested in something like this?

just make a 5mm less tall version of the Gabriel cooler from deepcool
GABRIEL-9-1.jpg

http://global.gamerstorm.cn/Product/Gabriel/

and then slap a Prolimatech Ultra Sleek Vortex 12 fan on it and BAM, a 50mm cpu cooler that clears the ram with a big 120mm above it
 
The Nexus is nearly end of life and is hard to get it, so i thought about developing my own heatsink.
The heatsink will be very similar to the Nexus, but with more heatsinks and the option to mount a 120mm fan under it. It will include a bracket to shift the fan if you don't have low profile ram. I think about Noctua as manufacturer.

Will be somebody interested in something like this?

I wounder is it possible to use Noctua Experience to get it perform perfect.

I want a low profile cooler max hight, it will have this possibilites and high performing fan silent and more requirements and they developed it for you and manufacture it for you ??

Faster you can get out this product the better for us and your company ofcourse it will cost you extra to let them develope some bit of the cooler but im shure you get it back.
 
Last edited:
I like the concept of the fan being under the heatsink myself. I would pay up to €100, I mean plenty of people pay that for a Corsair h100... I think it would be great if it worked in other sff PCs, you could potentially make more from it than the case! Only problem is development time, at least a year?
 
Fan under the heatsink works well for super low profile (like our sub 47mm), but permitting a 120mm on top gives plenty of options for different height and performance flexibility. such as having a 15mm or a 25mm fan for 62 and 72mm clearance.
 
The Nexus is nearly end of life and is hard to get it, so i thought about developing my own heatsink.
The heatsink will be very similar to the Nexus, but with more heatsinks and the option to mount a 120mm fan under it. It will include a bracket to shift the fan if you don't have low profile ram. I think about Noctua as manufacturer.

Will be somebody interested in something like this?

Very interested. I had to give up my favorite nh-l9i for the Thermolab LP53 because the noctua just couldn't handle my i7-4790K even at stock. All 100% copper makes a huge difference! So what ever you do I suggest all copper including the fins, with nickel plating if necessary.
 
Very interested. I had to give up my favorite nh-l9i for the Thermolab LP53 because the noctua just couldn't handle my i7-4790K even at stock. All 100% copper makes a huge difference! So what ever you do I suggest all copper including the fins, with nickel plating if necessary.

For the dan case, can we put the 14mm height noctua fan on the lp53 so it will fit? What would the mounting process be? Is this the one Linus used in his video?
 

Excellent reply. I'm about to pull the trigger on an lp53 from South Korea on eBay and play the waiting game. I'm running a C7 open air on a delidded 7700k and hitting max temps 75C while playing Overwatch at 165hz. That's a bit too high for comfort. I have the L9i here too for when my Dan case arrives.
 
As an eBay Associate, HardForum may earn from qualifying purchases.
The Nexus is nearly end of life and is hard to get it, so i thought about developing my own heatsink.
The heatsink will be very similar to the Nexus, but with more heatsinks and the option to mount a 120mm fan under it. It will include a bracket to shift the fan if you don't have low profile ram. I think about Noctua as manufacturer.

Will be somebody interested in something like this?

I am planning on getting the cooltek LP53 + NF-A9x14 as well if there is no other alternative that is under 47mm height. In fact in the thread for sentry case backers that has around 922 backers there is huge demand for a decent cpu cooler under 47mm height, specially if it can handle 95w. Ask the same question in that thread and I am sure you will get more than 20 people interested.

I mean for US buyers the cooltek LP53 + NF-A9x14 combination is easily a 70$ purchase.

Good idea if it can be fitted in both A4-SFX and the SaperPL Sentery, you will have more users interested in backing it.
 
Back
Top