PCIe 4.0 Will Arrive in 2017

HardOCP News

[H] News
Joined
Dec 31, 1969
Messages
0
Al Yanes, president and chairman of the PCI-SIG, told PCMag that version 4.0 of the PCIe specification will be out early next year. According to this article, PCIe 5.0 is already on PCI-SIG's future roadmap.

PCIe 4.0 will essentially double the interconnect performance bandwidth of the current 3.0 specification, from 8 gigatransfers per second (GTps) to 16GTps. In addition, it introduces new technologies to enhance power efficiency: the use of an L1 substate that drastically lowers power use in idle mode; half-swing and quarter-swing, which cut power consumption by 400mV and 200mV, respectively; and high-speed data transfer bursts with minimum idle power.
 
So something tells me Zen will come out next year, but just before PCIe 4.0, so it won't officially support it, and it will take another 6 years for the CPU update.
 
So something tells me Zen will come out next year, but just before PCIe 4.0, so it won't officially support it, and it will take another 6 years for the CPU update.
The standard will release next year but we won't see it in hardware for another 6months to a year.

AMD will most likely have a server platform using PCIE 4.
 
So something tells me Zen will come out next year, but just before PCIe 4.0, so it won't officially support it, and it will take another 6 years for the CPU update.
Direct from article :p

It is also expected that the next generation of computer processors will offer support for it, though the two announced this week—Intel's 7th Generation Core and AMD's Zen—will likely be excluded, as the first products using them will be released before the specification is finalized.
 
Have we even stressed PCI-E 3.0 x16 yet? Heck, to my knowledge, even PCI-E 2.0 x16 (PCI-E 3.0 x8) isn't really maxed out for single-card configurations.
 
Sure its overkill for most uses but hopefully we'll see 10Gb network cards that fit into PCIe4 x1 slots.
 
Yea, with flash growing by leaps and bounds we're seeing most of this push for speed coming from enterprise storage. NVMe lanes, baby!
 
Have we even stressed PCI-E 3.0 x16 yet? Heck, to my knowledge, even PCI-E 2.0 x16 (PCI-E 3.0 x8) isn't really maxed out for single-card configurations.
PCIe is not just for graphics. I can see this technology being used for large 4u Servers with many flash based storage devices. They would want PCIe4.0 for that extra bandwidth.
 
the biggest news *I* see from this is the increased power available from the slot

That was the big thing I noticed, too. And the question that goes along with it, will they need to add extra power connections to motherboards to supply the extra juice, or can all that extra power run along the existing motherboard power connectors. Even if it just means moving the PCI-E power connections from the video card to the motherboard, it'd still make PC assembly simpler.
 
Not very excited for this. PCI-E 3.0 x16 still can't be saturated by GPUs. x8 is arguably more bandwidth than they currently need. Now, PCI-E SSDs would love this, but SSD tech seems to be advancing faster than software can compensate for, if M.2 over PCI-E is any indication.

Maybe in 3 years this will mean something.
 
I'm concerned regarding the backwards compatibility. They state it will be backwards compatible, however I read elsewhere that only pertains to using PCIe-3.0 cards in the new slot.

Certainly enough of a reason to hold out on my next build until I can get it. I don't want to find out I can't upgrade my GPU a couple years down the road because all the new shiny stuff is PCIe-4.0 and won't work with my couple year old PCIe-3.0 board. I ran into that problem with the transition from AGP to PCIe, and am not making that mistake again..
 
This has benefits for top end systems (large servers) and low and mid range consumer systems (300w power delivery via the slot) and future benefits for high end gpus.
 
Not very excited for this. PCI-E 3.0 x16 still can't be saturated by GPUs. x8 is arguably more bandwidth than they currently need. Now, PCI-E SSDs would love this, but SSD tech seems to be advancing faster than software can compensate for, if M.2 over PCI-E is any indication.

Maybe in 3 years this will mean something.

You want things to stay the same? Tech needs to remain as is until you feel like it's time to move on?
PC has always been about having more than what you need, that's how we stay ahead of the consoles and Mac Pro's.
 
Of course not, but its not going to be supported on Kaby Lake so those two are the first ones that could possibly support it.

I don't think we'll see it on Skylake-X. I guess it's possible, though.
 
You want things to stay the same? Tech needs to remain as is until you feel like it's time to move on?
PC has always been about having more than what you need, that's how we stay ahead of the consoles and Mac Pro's.

It's incredible how people will read a post and just hallucinate its contents. Nothing you wrote here has any relevance to anything I said or you quoted. None. Zilch.
 
It's incredible how people will read a post and just hallucinate its contents. Nothing you wrote here has any relevance to anything I said or you quoted. None. Zilch.

Alot. Mucho.

How can you not be excited that tech is moving forward regardless of it's current usefulness?
I've been PC gaming for a short time, but there's always people saying what we have is enough for now, then suddenly a good majority wants to upgrade to the thing we thought was excessive.
 
Have we even stressed PCI-E 3.0 x16 yet? Heck, to my knowledge, even PCI-E 2.0 x16 (PCI-E 3.0 x8) isn't really maxed out for single-card configurations.

Servers will likely take advantage of it when XPoint memory systems are released. Probably will be a few years before it filters down as necessary for consumer systems
 
How can you not be excited that tech is moving forward regardless of it's current usefulness?

It's nice that tech is moving forward. It's not nice that we won't see tangible benefits for some time. I made the comparison to M.2 for a good reason. Software is holding back our ability to realize the full benefits of recent advances in hardware.
 
It's nice that tech is moving forward. It's not nice that we won't see tangible benefits for some time. I made the comparison to M.2 for a good reason. Software is holding back our ability to realize the full benefits of recent advances in hardware.

Software lagging Hardware has always been the case. The only reason why it seems to take even longer these days is because the current advances fundamentally changes how a lot of things have been done in the past. Like do you really need traditional RAM if XPoint can act as the same thing? Or what if you could actually remove all power from a system, and turn it back on later with it exactly like it was before? Writing to systems like that securely isn't really something you can immediately do. IOT devices are a perfect example of this.
 
the biggest news *I* see from this is the increased power available from the slot
Indeed. 300-500W from the slot would mean no more power cables be connected to video cards themselves. Opens up more cable management possibilities. The question is will power go into the motherboard via extra cables or is there also going to be an update to the ATX spec to feed power through the ubiquitous 24-pin cable.
I'm concerned regarding the backwards compatibility. They state it will be backwards compatible, however I read elsewhere that only pertains to using PCIe-3.0 cards in the new slot.

Certainly enough of a reason to hold out on my next build until I can get it. I don't want to find out I can't upgrade my GPU a couple years down the road because all the new shiny stuff is PCIe-4.0 and won't work with my couple year old PCIe-3.0 board. I ran into that problem with the transition from AGP to PCIe, and am not making that mistake again..
You can put a 3.0 card into a 4.0 slot and have it work, but you won't be able to use 4.0 hardware in a 3.0 slot. I'm sure we'll still see 3.0 hardware for awhile yet.

What problem was there with AGP to PCI-E? We all knew the change was coming, and all hardware was clearly advertised.
It's nice that tech is moving forward. It's not nice that we won't see tangible benefits for some time. I made the comparison to M.2 for a good reason. Software is holding back our ability to realize the full benefits of recent advances in hardware.
It's the classic chicken and egg problem. Someone has to take the first step. It took a good 12 years after the introduction of 64-bit processors in the consumer space to see an abundance of real 64-bit software in the wild.
 
So something tells me Zen will come out next year, but just before PCIe 4.0, so it won't officially support it, and it will take another 6 years for the CPU update.

The standard will release next year but we won't see it in hardware for another 6months to a year.

AMD will most likely have a server platform using PCIE 4.

It took around 18 months from PCIe 3.0 finalized till release of the first CPU with support.

So 2018-2019 for the first CPUs depending on when it gets finalized.
 
Will PCIE 4.0 be backwards compatible with 3.0? If so, I'm all for the upgrade.
 
It took around 18 months from PCIe 3.0 finalized till release of the first CPU with support.

So 2018-2019 for the first CPUs depending on when it gets finalized.
I know, but this time Intel and AMD have a tech refresh close to the release.
 
Will PCIE 4.0 be backwards compatible with 3.0? If so, I'm all for the upgrade.
The slot will be, but the connected hardware won't. In other words: a 3.0 video card will work in a 4.0 slot, but a 4.0 video card will not work in a 3.0 slot.
 
So something tells me Zen will come out next year, but just before PCIe 4.0, so it won't officially support it, and it will take another 6 years for the CPU update.

Ah, I see that did not take long. ;) A specification is not support and you will not see Intel doing so either for a while. Of course, it will require a whole new motherboard and cpu to do so which means your Coffee Lake cpu will not do it.
 
Have we even stressed PCI-E 3.0 x16 yet? Heck, to my knowledge, even PCI-E 2.0 x16 (PCI-E 3.0 x8) isn't really maxed out for single-card configurations.

pcie-3.0 is ~ 1GB/s/lane.

Mellanox Dual port 100Gbit/s ethernet cards need ~ 25GB/sec (BYTE not bit) and are pci-e 4.0......so....for certain card types, pci-e 3.0 x16 is a limitation.
 
The slot will be, but the connected hardware won't. In other words: a 3.0 video card will work in a 4.0 slot, but a 4.0 video card will not work in a 3.0 slot.

WRONG.

PCI Express - Wikipedia, the free encyclopedia

On November 29, 2011, PCI-SIG announced PCI Express 4.0,[43] providing a 16 GT/s bit rate that doubles the bandwidth provided by PCI Express 3.0, while maintaining backward and forward compatibility in both software support and used mechanical interface.

Forward-compatibility means new cards work in old slots.
 
Have we even stressed PCI-E 3.0 x16 yet? Heck, to my knowledge, even PCI-E 2.0 x16 (PCI-E 3.0 x8) isn't really maxed out for single-card configurations.
PCIE 4 I hear can push up to 300 watts through the mobo copper, which is pretty sweet. Must be some thick ass mobos tho.

Also can become useful in crossfire/SLI setups w/ high end cards, and right now both AMD and NVIDIA are hinting that dual-GPU (one dedicated per eye) setups are ideal for VR applications.
 
What problem was there with AGP to PCI-E? We all knew the change was coming, and all hardware was clearly advertised.

Just an unlucky situation for myself. My GPU failed prematurely, and there was very little option for anything AGP at the time to replace it with.

I don't mess around when it comes to motherboards anymore. It's my most infrequent upgrade, that I look to get the most longevity out of. For that reason I try to ensure I have specifications that will last. The motherboard is the foundation of a build, everything on top of it depends upon the specifications it supports. My existing board is going on about 8 years now. At the time I made sure it had PCIe-3.0, USB 3.0, DDR3, etc. I've been able to upgrade my GPU multiple times, and other components as well.

PCIe-4.0 is close enough to release that I think my existing system will last till then. If I can hold out until then, it will provide me a sufficient upgrade path to last me another several years. PCIe-3.0 boards will not.

I upgrade my GPU pretty frequently, so I want to make sure I'll have a board that will accommodate that for as long as possible. Especially with how slow processor advances are these days. There isn't as much a reason to upgrade the CPU/Board/Mem as there used to be..
 
Interesting, thanks for posting that. I hope that ends up being the case.

There's always edge-case compatibility issues, unforeseen bugs introduced in chipsets, and the lovely times introduced with the recent transition to video cards with UEFI.

But the OVERALL goal is seamless compatibility.
 
PCIE 4 I hear can push up to 300 watts through the mobo copper, which is pretty sweet. Must be some thick ass mobos tho.

I am not sure how that will work and retain compatibility either way.
 
I am not sure how that will work and retain compatibility either way.
Just a few extra layers on the motherboard I would assume, and a new ATX PSU power connector perhaps.

For most people, it'll mean even cleaner case designs though, especially for SFF builds which is sweet.
 
Back
Top