SDD upgrade for my laptop

theplaidfad

Lurker
2FA
Joined
Apr 24, 2008
Messages
1,265
Hello all,

I have this laptop.
https://us.msi.com/product/notebook/GS60-Ghost-Pro-6th-Gen-GTX-970M.html#hero-overview

I'd like to replace the 1tb HDD storage drive with an SSD, on a tight budget, and was wondering what my best option would be. I can take suggestions for anything in the 512gb-1tb range.

I know it has at least 1 PCIe interface and at least 1 SATA interface for a 2.5" drive, but can't tell if it has any other upgrade slot options available.

Thanks,
Tim
 
The laptop comes with a 128GB M.2 drive, yeah?

If you use that as your boot drive and the mechanical HDD as just storage, you should be fine. :)

Either way if you want a 512GB or 1TB SSD, I personally have always used Samsung's SSDs. Their 850 EVO is a great drive. If you aren't afraid to buy used, you can pick up a 1TB for around $200 or so.
 
If you can find a good sale price on one, check out the Crucial MX200 1TB. The TBW endurance is about the same as the Samsung 850 Pro. The SanDisk X400 1TB also has comparable TBW endurance.
 
if your on a tight budget your 2 options are MX200 or 850 EVO. Get wehatever is cheaper

The X400 is a new find recently from some forum members so check that out. I have no experience with it and i dont know much about it in terms of if its any better or worse or comparable.

EDIT: MX200 1TB goes as low as 270+/- so use camel camel camel.com to price watch it

EDIT: is that m.2 SATA or PCIe or both? If it supports SATA i would recommend the X400 then becuase it is 1TB for like 270 or something so its pretty cheap and then you got room for a 2.5 HDD too.

Well its sold out but this was it

http://www.newegg.com/Product/Product.aspx?Item=9SIA65C3RM4403

But check reviews for X400, MX200, 850 EVO and check prices. Its your best bet. But figure out is SATA works on M.2 if not then your stuck with 2.5 in
 
Last edited:
Would I be better off replacing the 1tb Hdd with just a plain 2.5" ssd, or pulling both and just buying a large PCIe SSD and selling the other two to recoup some cost?
 
Would I be better off replacing the 1tb Hdd with just a plain 2.5" ssd, or pulling both and just buying a large PCIe SSD and selling the other two to recoup some cost?

well a PCIe drive is faster but they are quite expensive and i wouldn't recommend it if cost is an issue. Also they have some minor issues with being bleeding edge and all.

Personally if cost and performance are a concern I would get a 1TB SATA m.2 if your m.2 supports it.

and get a 1TB HDD or an additional 1TB SSD.

So an example (not saying the best bang for your buck..these are just the items i know off my head)

1 TB X400 m.2
1 TB 2.5in HDD

or

1 TB X400 m.2
1 TB 850 EVO/MX200

choose between all SSD or SSD/HDD and you get 2 TB of space. If you even need that much.

Considering cost is on your mind I would not recommend getting a 950 PRO because for the average person the benefits don't justify the cost when money is on your mind.

So you need to find out if M.2 SATA drives work in M.2 NVMe slots. I think they do but make another thread asking that because i don't know that answer.

Also whats the speed of the M.2 drive you already got and what is the size? Is it totally useless due to how small it is?

Also how much space are you currently using and plan on using? All of these you haven't exactly answered and can have an effect on whats the best bang for your buck.


and god do i hate typing. it takes so damn long vs talking lol
 
Would I be better off replacing the 1tb Hdd with just a plain 2.5" ssd, or pulling both and just buying a large PCIe SSD and selling the other two to recoup some cost?

If the included 128GB PCIe SSD isn't cutting it as a boot+primary app device, then I'd get at least a 240-256GB replacement, then look to replace the 2.5" 1TB spindle with a 2.5" SSD and either sell the old parts or repurpose them (like putting the 1TB spindle in an external USB3 enclosure for portable storage/backup).
 
Last edited:
If the included 128GB PCIe SSD isn't cutting it as a boot+primary app device, then I'd get at least a 240-256GB replacement, then look to replace the 2.5" 1TB spindle with a 2.5" SSD and either sell the old parts of repurpose them (like putting the 1TB spindle in an external USB3 enclosure for portable storage/backup).

do M.2 SATA drives work in regular M.2 PCIe drives?
 
Ugh, I'm thinking that I'll just stick with what I have. So what if the games I'll seldom get to play load slower.

Thanks for the input anyway folks.
 
Ugh, I'm thinking that I'll just stick with what I have. So what if the games I'll seldom get to play load slower.

Thanks for the input anyway folks.

np glad to help. You can always upgrade alter. 1TB 950 PROs and 1TB 950 EVOs will be out end of this year so you could upgrade then.
 
They should, as SATA is backwards compatible with NVMe for M.2 sockets, if I understand it correctly. Can anyone confirm this?

No. SATA and NVMe drives can use the M.2 (NGFF) physical & electrical slots, but there is no built-in backward compatibility. Drives identify using specific pins on the M.2 slot, and it's up to the motherboard to read that and route the M.2 slot appropriately between either PCIe lanes or to a SATA controller (port).

The standards are closed (i.e. $$$) unfortunately, but SATA and PCI-e have their own dedicated pins, making it a no-brainer for most motherboards to support both SATA/PCIe (although physical SATA connectors may be disabled if an M.2 SATA SSD is connected).

However, you should not expect an M.2 SATA SSD to work in a regular M.2-to-PCIe adapter -- it won't unless the adapter incorporates a SATA controller.
 
No. SATA and NVMe drives can use the M.2 (NGFF) physical & electrical slots, but there is no built-in backward compatibility. Drives identify using specific pins on the M.2 slot, and it's up to the motherboard to read that and route the M.2 slot appropriately between either PCIe lanes or to a SATA controller (port).

The standards are closed (i.e. $$$) unfortunately, but SATA and PCI-e have their own dedicated pins, making it a no-brainer for most motherboards to support both SATA/PCIe (although physical SATA connectors may be disabled if an M.2 SATA SSD is connected).

However, you should not expect an M.2 SATA SSD to work in a regular M.2-to-PCIe adapter -- it won't unless the adapter incorporates a SATA controller.

ah thats good info especially the last line. That makes sense about the PCIe adapters.
 
Yeah, most NVMe->PCIe adapters are just dumb PCBs, like the one below. They simply connect M.2 slot pins for PCIe to the appropriate PCIe slot fingers. The M.2 slot pins for SATA are connected to...nothing.

oRoHnuw.png


Some NVMe->PCIe adapters claim they are compatible with AHCI SSDs. BEWARE! This does NOT mean SATA, but M.2 PCIe SSDs using AHCI instead of NVMe. Only a few models were ever made; the difference is that AHCI will boot off of motherboards that don't support NVMe boot.
 
Yeah, most NVMe->PCIe adapters are just dumb PCBs, like the one below. They simply connect M.2 slot pins for PCIe to the appropriate PCIe slot fingers. The M.2 slot pins for SATA are connected to...nothing.


Some NVMe->PCIe adapters claim they are compatible with AHCI SSDs. BEWARE! This does NOT mean SATA, but M.2 PCIe SSDs using AHCI instead of NVMe. Only a few models were ever made; the difference is that AHCI will boot off of motherboards that don't support NVMe boot.

i wonder what the ASUS one and kingston are. Those might be different but maybe not.
 
i wonder what the ASUS one and kingston are. Those might be different but maybe not.

It's easy to see the M.2-to-PCIe slot traces on the Kingston; if you look a little closer, same thing on the Asus. But both of these boards convert PCIe 12V to provide 3.3V to the SSD instead of just directly connecting the slot's 3.3V lines. This is good, because the PCIe spec limits non-graphics cards to 1A max @3.3V, but about 1.8A@12V which should give nearly 6A@3.3V assuming 90% conversion efficiency.
 
Oh, that's what you were asking. Sorry I wasn't clear. Yes, PCIe NVMe (or AHCI) drives only. SATA M.2 SSDs aren't supported.

but the motherboard M.2s if they support PCIe they also support SATA though right?
 
but the motherboard M.2s if they support PCIe they also support SATA though right?

Yes, motherboard M.2s support both PCIe and SATA pretty much universally. Add-in cards are usually only PCIe.
 
Yes, motherboard M.2s support both PCIe and SATA pretty much universally. Add-in cards are usually only PCIe.

ha should have added this...but what about laptop motherboards like his :D...that was an important addition i totally forgot -_-
 
Great info about SATA and NVMe M.2 interfaces...thanks for clarifying, everyone!
 
Back
Top