Mystery stutter

peron11

n00b
Joined
Jan 16, 2016
Messages
8
I had a gtx 750, fx 6300, 4gb ram, 1T hdd / 300gb hdd, thermaltake 500w

From time to time an intermitent stutter appeared only on the second part of phantom pain (most intensive than the first map) the other games worked fine.
Then it started to happen on dying light and far cry 4, more frequently and more severe.
fps dropped for some seconds and then back again to usual fps.
So I decided to updrade my ram, I replaced one 1gb stick with a 8gb one. problem persisted, left only the 8gb one, the same, then placed it on the other slot, the same.

Few days ago installed a R9 380 4gb.....same problem again, so I decided to install windows7 again.....same problem.

Relevant data:
-never overclocked anything.
-max cpu temp 50°c, nice cooler.
-max gpu temp 75°c [its normal for that gpu)

Important data and why im posting here:
-Its linked to drops in the gpu core clock and mem clock.
-I doesnt happen in uniheaven benchmark maxed out, even for prolonged time.
-It doesnt happen in tombRaider maxed out for prolonged time.
-In those cases gpu stays at max temp and 100% usage but core clock and memory never drops like with other games, even stressing in the more demaning areas for prolonged time.

What I think:
-It seems psu is fine, its capable of give the gpu enough to max it out for long times.
-Maybe if the psu is not enough because it cant provide power to both cpu and gpu at the same time...? [from what I readed if psu is the problem, pc just crash]
-Problem seems to be located in motherboard or cpu from whatever reason...?

Things I did with no success:
-Defrags / tweaking the bios here and there / cleaning the dust inside the case and the fans / windows power saving / Tweaking the pagefile size / vsync on/off.

ANY CLUE...? IM SURE THERE MUST BE A FIX

Sorry for my english.
 
I'll address things I see here:

- 4GB of RAM is too little for gaming. Good chance this is your problem since you have no issues in benches/games that are not CPU intensive. Gimping the FX with single-channel memory is not going to help either.

- Stuttering can be linked to old, slow hard drives having a difficult time streaming the textures to intensive games.

- What motherboard do you have? You posted it the motherboard section but did not post a make/model. It is possible you're seeing APM/VRM throttling.

- What model PSU do you have? Thermaltake has probably made about 30 different "500W" units and most of them aren't worth the aluminum case they're in.
 
Hi LigTasm thanks.

-Im currently using 10gb of ram, 1x8 and 1x2, I explained it on the post.
Just in case removed the 2gb stick and tried with the 8 only, then changed it to the other slot, notshing fixed it.
-Most of my games are located on a 1T HDD, its 1 year old. Windows7 is alone in a partition in the 300gb HDD.
-My motherboard is an ASRock 960GM-VGS3 FX
-My PSU is a Thermaltake TR2, I noticed that it doesnt say "80plus" anywhere.

ThermaltakeTR2.jpg


Thanks
 
Hi LigTasm thanks.

-Im currently using 10gb of ram, 1x8 and 1x2, I explained it on the post.
Just in case removed the 2gb stick and tried with the 8 only, then changed it to the other slot, notshing fixed it.
-Most of my games are located on a 1T HDD, its 1 year old. Windows7 is alone in a partition in the 300gb HDD.
-My motherboard is an ASRock 960GM-VGS3 FX
-My PSU is a Thermaltake TR2, I noticed that it doesnt say "80plus" anywhere.

[]http://minds.com.ar/image/data/Componentes/Fuentes/ThermaltakeTR2.jpg[]

Thanks

Splitting a drive up into separate partitions has a negative impact on performance when the OS and applications are both trying to access their own separate areas of the disk at the same time.
 
Ok you have a bunch of things going on here. First, you don't want to be using asymmetrical RAM like that, you're likely in single-channel mode because of it. Not the biggest deal but you are losing out.

Next, like the above poster said, partitions are not the best idea for your uses. If your games are on the second partition they have to fight the OS for access to the disk to load textures and game information.

Third, that board is a turd, no way to sugar coat it. Run HWmonitor and Prime95 for a few minutes and I bet money you'll see the cores throttling to save the puny 3-phase VRM from a firey doom.

All of these things combining is going to put you in stutter city when you try and play games.



Also, as an aside that PSU was pretty mediocre when it came out in 2010 and it isn't doing you any favors now.
 
HAHAHAHAH thanks it made me laugh a little :D I needed that. :)

Ok im checking Prime95, what should I see in HWmonitor? and how will I know is throttling?

Thanks!

CPU cores will randomly drop to probably 1400mhz (not sure what it is on a 6300), this is to protect the VRM's. In games, it likely happens much less frequently than with P95 because the power delivery system is not taxed as much. However, this is just to illustrate one thing that is likely occurring. If the game is using a lot of CPU resources and cores start dropping to lower clock speeds, you will get bad stuttering.
 
CPU cores will randomly drop...

Hi I'm back, tried the default settings for Prime95 and took this screenshot, I hope it helps.
CPU usage was at 100% most of the time, it just happened that I took the pic while in 99%
What should be the course of action now? It is as you said :)

i5nL2vE.jpg
 
Hi I'm back, tried the default settings for Prime95 and took this screenshot, I hope it helps.
CPU usage was at 100% most of the time, it just happened that I took the pic while in 99%
What should be the course of action now? It is as you said :)

Well, it depends on budget I guess. You bought a nice new GPU so you obviously want the performance, are you limited to micro ATX boards?
 
Well, it depends on budget I guess

Well, Im not interested in using more than one GPU or adding more ram sticks, maybe another HDD in the future, so I guess micro ATX is fine.
And yes, Im kinda limited with the budget, definitely not gonna get some unreliable board but neither a super top notch one, im fine with one that just get the job done :)
Oh, a question, what did you mean with "you'll see the cores throttling to save the puny 3-phase VRM" is that a part of the board right..?
Thanks
 
Well, Im not interested in using more than one GPU or adding more ram sticks, maybe another HDD in the future, so I guess micro ATX is fine.
And yes, Im kinda limited with the budget, definitely not gonna get some unreliable board but neither a super top notch one, im fine with one that just get the job done :)
Oh, a question, what did you mean with "you'll see the cores throttling to save the puny 3-phase VRM" is that a part of the board right..?
Thanks

Watch this: https://www.youtube.com/watch?v=zDxFbAhu4Bo

Next, are you in the US, or where do you order your hardware from?

Also, can your case fit a full ATX board? If not, AM3+ mATX offerings are very limited in terms of worth-while buys.
 
Well, Im not interested in using more than one GPU or adding more ram sticks, maybe another HDD in the future, so I guess micro ATX is fine.
And yes, Im kinda limited with the budget, definitely not gonna get some unreliable board but neither a super top notch one, im fine with one that just get the job done :)
Oh, a question, what did you mean with "you'll see the cores throttling to save the puny 3-phase VRM" is that a part of the board right..?
Thanks


VRM = voltage regulator module. It's what converts 12v from the power supply to ~1v and high current the CPU needs. The more "phases" it has, the more it can spread out the power demand so that no single component of the VRM is overburdened. Having more phases, also helps smooth out the flow of current.


In your case, the cpu is drawing so much power that the 3 phases can't keep up. So the VRM tells the CPU that's it being over-taxed (temps are too high, too much current is flowing, or voltage drops below a set threshhold), and the CPU slows down to reduce it's power demand.


If the CPU didn't throttle down, the VRM could burn itself out leaving you with a dead motherboard that could possibly take the CPU out as it goes.
 
Last edited:
VRM = voltage regulator module.

Thanks, didn't know that, everything used to work just fine in the same games and same scenarios, could it be that, that part of the board is dying now?
From what I could interpret the culprit is mostly the board...or maybe the psu?
Just asking to be sure what part to buy first, I'd literally die in anguish if after spending money again, the problem is still here :p
And again, thanks for your help!!
:)
 
Well the PSU should be fine, it isn't the best but your machine isn't shutting down under load so I would go with the board first, and try to pick up a second stick of 8GB to match your first.
 
Well the PSU should be fine, it isn't the best but your machine isn't shutting down under load so I would go with the board first, and try to pick up a second stick of 8GB to match your first.

Hi Im back!
I bought an Asus M5A97 R2.0, installed it myself! it was a little scary ,specially moving the cpu, applying the thermal paste and all that, but it was good.
It seems my stutter issues were caused by the old board ;/
Thank you guys, I really really appreciate your help :)

CYA!!
 
Hi Im back!
I bought an Asus M5A97 R2.0, installed it myself! it was a little scary ,specially moving the cpu, applying the thermal paste and all that, but it was good.
It seems my stutter issues were caused by the old board ;/
Thank you guys, I really really appreciate your help :)

CYA!!

No problem, enjoy your machine!
 
I only have had mystery stutter from two things, so I consider myself lucky
1) HDD, this has happened with a few different computers over the years. One HDD made my previous 3930K 7970Xfire liquid cooled monster have a random stutter, which took a while to track down. You also mentioned doing defrags so, may be best to start here because a crap HDD will stutter up your day.
2) Hardware is not stable or powerful enough, this includes stock or OCd configurations.

Also I'd move to windows 10 if I were you, its far better optimized for lower/weaker core counts in my opinion. I only say this as I used to have a G3258 that would stutter in certain games under W7 but was smooth in 8.1/10.
 
Last edited:
Back
Top