FM2 processor and PCIe 3.0 slots

DermicSavage

[H]ard|Gawd
Joined
Jun 8, 2004
Messages
1,107
I am looking at upgrading my htpc into a gaming steam box. I already have an AMD A8-5600K that I plan to reuse, but will be upgrading the motherboard to a FM2+ MSI A88XM GAMING http://m.newegg.com/Product/index?itemnumber=13-130-755 . The intent is to also add an AMD R9 290 in the mix as well since they are getting cheap.

I mainly want to upgrade the motherboard to support an upgrade option to crossfire. What I'm struggling to figure out, is that the MSI board notes that PCIe 3.0 only works on a FM2+ CPU, but does that mean those slots will not function at all on my FM2 processor or will it operate at PCIe 2.0?

Any help here would be much appreciated.
 
It will be limited to 2.0.

In all honesty that weak processor will hold a 290x back way more than than PCI-E 2.0
 
Thanks for the info. Out of curiosity, what am I really missing out on over a kaveri chip?
 
The only thing that will be missing out if you get a Kaveri chip is your wallet. Going from an A8-5600K to any Ax-7xxx chip will net you at most a 15% performance gain, with 7-10% being average.

The only advantage the Kaveri chip has is the better R5/R7 IGP and a lower TDP, both of which are irrelevant to your build.

If you want something that can drive an R9 290, get a Haswell i3. The i3 will have far better performance than the anemic Bulldozer cores and costs less.
 
Thanks for the info. Out of curiosity, what am I really missing out on over a kaveri chip?

Operations per second. A higher end kaveri will help, but not materially until dx12 hits in a big way. There's supposed to be a refresh of the kaveri chips this summer as well so if you're looking to upgrade wait until at least june (computex).
Kaveri does have some nice features but it needs software to work with them
HSA-LibreOffice.png

from http://www.extremetech.com/computin...-wait-for-the-first-true-heterogeneous-chip/5
 
Back
Top