AHCI detection problem

s3rvb0t

[H]ard|Gawd
Joined
Aug 22, 2006
Messages
1,847
Just put together a new rig consisting of a 8320E and a GA-78LMT-USB3. My DVD-RW is having issues booting my Win7 DVD in AHCI mode. I prefer not to install Win7 in IDE and regedit to SATA.

  • I have 3 SATA devices connected: 1 SSD, 1 HDD, 1 DVD-RW
  • All of my drives are detected just fine in IDE mode
  • Drives are not detected and can't boot from any of them in AHCI mode

Thanks!
 
Are you booting by legacy mode (BIOS) or by UEFI? as I believe you need to boot by selecting the old BIOS method (It would be the one without UEFI or just EFI infront of it)
 
Are you booting by legacy mode (BIOS) or by UEFI? as I believe you need to boot by selecting the old BIOS method (It would be the one without UEFI or just EFI infront of it)

I'm booting by legacy mode
 
There was an option I overlooked in the BIOS to run SATA ports 5 and 6 as IDE while keeping 1-4 as AHCI. Plugged DVD drive in 5 and boom, fixed.
 
Last edited:
Back
Top