Battlefield 4 Loves High Speed Memory

Ugh, how much is 16gb of 2400mhz ram going to set me back? $200? Just to play one game slightly faster?
 
Still using web based server browser?

It doesn't matter what lobby interface is used, their 'cheat' protection subsists of one of the largest pieces of shit software ever created, which blocks absolutely nothing and creates endless configuration stability problems.

Then again this is DICE and EA, masters of repetition.
 
ArmA 3 is another game that apparently loves high-speed memory. Someone posted like a 10 FPS gain going from 1333 to 2333 or whatever. Not going to spend $200+ to upgrade my RAM for that, though.
 
Don't forget that's in addition to $100+ cost to upgrade to Windows 8.1 to get the best frame rates. ;)


"Best frame rates" still remains to be seen and independently validated. The game is not even out yet and DICE has been optimizing for Win7 since they recognize there are more than 3 Win7 users for every Win8 user.
 
I have to admit that I bought Corsair ram for quite a while and always struggled to get it to go past stock. Even tough to push some 1600 sticks to 1600 reliably.

But over the past 18 months I'm bought several Kingston 2133/2400 sets and they have all worked like a charm. Set em where I want them and they work.
 
"Best frame rates" still remains to be seen and independently validated. The game is not even out yet and DICE has been optimizing for Win7 since they recognize there are more than 3 Win7 users for every Win8 user.

But in 6 months...a year? May as well start optimising for the newer OS going forward. Get the leg work done for the next generation of games.
 
"Best frame rates" still remains to be seen and independently validated. The game is not even out yet and DICE has been optimizing for Win7 since they recognize there are more than 3 Win7 users for every Win8 user.

Only going by what the developer says... ;)
 
I played BF4 beta and check with task manager, BF4 take about 4-5GB of system ram...so what is point upgrade to 2400 ??? I call this fck BS

Since BF4 beta running under 64bit right ? it's can't take more than 4GB even if we have 8gb or 16GB installed.


GTFO OP !
 
I played BF4 beta and check with task manager, BF4 take about 4-5GB of system ram...so what is point upgrade to 2400 ??? I call this fck BS

Since BF4 beta running under 64bit right ? it's can't take more than 4GB even if we have 8gb or 16GB installed.


GTFO OP !


Lol talk about an epic bandwagon fail post
 
I played BF4 beta and check with task manager, BF4 take about 4-5GB of system ram...so what is point upgrade to 2400 ??? I call this fck BS

Since BF4 beta running under 64bit right ? it's can't take more than 4GB even if we have 8gb or 16GB installed.


GTFO OP !

wut?
 
My cat speaks English more coherently.
I think he should post in his native language, then at least we could put it through a translator. Not saying anything bad, just might make it easier for him, even though he did not understand what he read.
 
I only upgraded BF3 to premium after the 50% sale origin just had so I basically payed $16 for it.

I originally bought the limited version and refused to pay another 60 dollars at the time for the premium edition.

So i'm going to a wait and see approach on BF4.

As for upgrading memory for 5-10fps more fps no thanks.

for the guys posting about the quality of corsairs memory going down a friend of mine has said the same thing.

I've been using strickly muskin ram since my AMD Opteron 170 and never had a single issue and plan to stick with muskin.

i'm also curious to see the effect of tripple channel memory on my system i'm already on a 6c/12t chip with a 7970ghz and 12GB of Cas 7 DDR3 1600 memory which does about 24GBs in the sandra memory test so i'm not expecting to have any performance issues.
 
Don't forget that's in addition to $100+ cost to upgrade to Windows 8.1 to get the best frame rates. ;)

You failed getting the cheap Win8 that was posted in the HotDeals section awhile back :)
 
I think he should post in his native language, then at least we could put it through a translator. Not saying anything bad, just might make it easier for him, even though he did not understand what he read.

General rule if you are attempting to make a point in a secondary language. Just put it down in your native tongue and we will put it through Google Translate.
 
Not the first game to see gains from faster memory. There is one for Batman Arkham City that shows decent gains up to 2133 and less as it gets to 2400.

I'd like to see stepping of BF4 with 1600/1866/2000/2133/2400.
 
I've never had a stick of Corsair memory that overclocked worth a shit.

They bin their memory, sell the faster chips at higher prices, and the slower chips at lower prices. In my experience you get the speed you pay for but you don't get much headroom, and I've had better luck with manufacturers like G.Skill.

In fact, Corsair and OCZ memory are on my suck list.

Preach it my man!
 
so are they saysing turn cas up from 9 to 11 and go from 1600 to 2400?
 
For anyone wanting cheap 2133 memory, all the new LP sticks run 2133 by just changing the timings and without a hitch.

Example, http://www.newegg.com/Product/Product.aspx?Item=N82E16820148663

That ram is only 1600MHz.
Corsair claims up to 22% improvement moving from 1600MHz to 2400MHz, which is what this thread is about.

The Kingston PredatorX 2400MHz series is good value.
(they are rated at 1.65V but you can run them at quite a bit less)
I'm using 8GB on a SB system @ 2.2GHz, 1.44V, CL11
http://www.newegg.com/Product/Produ...MATCH&Description=hyperx+2400&N=-1&isNodeId=1



Hmm, I just spotted something peculiar in the SPD timings map reported by Gigabytes Easytune.
It lists 1068MHz (2136MHz DDR) as 1.6V, "CL 3.2" !?
However the tRAS jumps from 4 at 1200MHz to 765 at 1068MHz lol.
 
This might have something to do with swapping a large amount of resources between system RAM and video RAM.

A PCIe 3.0 16x slot delivers 15.75 GB/s, compare that against DDR3 bandwidth:

DDR3 1600 = 12.5 GB/s
DDR3 1866 = 14.6 GB/s
DDR3 2133 = 16.7 GB/s

So you need DDR3 2133 to assure that you can completely saturate the bus of one PCIe 3.0 card... or two PCIe 2.0 cards in SLI.

I'd be curious if BF4 is also highly sensitive to PCIe bandwidth.
 
If I bottleneck on my 1600MHz ram after upgrading to a new GPU I will definitely rage.

Most people are still saying "1600MHz is enough for any 1155/1150 build"

DDR4 will be main-stream in 2014 so I suppose I'll be scratch building in 2015 with DDR4 and Skylake.
 
If I bottleneck on my 1600MHz ram after upgrading to a new GPU I will definitely rage.
That's why I'm curious what PCIe bandwidth will do to BF4 performance.

If you have a Sandybridge processor, then you're stuck at PCIe 2.0 anyway (8GB/s), which DDR3 1600 will have no trouble keeping up with... but it means PCIe is your bottleneck, not RAM.

If that turns out to be the case, then upgrading to Iveybridge (doubling PCIe bandwidth in the process) would be more worthwhile than tossing in faster RAM.
 
If I bottleneck on my 1600MHz ram after upgrading to a new GPU I will definitely rage.
That's why I'm curious what PCIe bandwidth will do to BF4 performance.

If you have a Sandybridge processor, then you're stuck at PCIe 2.0 anyway (8GB/s), which DDR3 1600 will have no trouble keeping up with... but it means PCIe is your bottleneck, not RAM.

If that turns out to be the case, then upgrading to Iveybridge (doubling PCIe bandwidth in the process) would be more worthwhile than tossing in faster RAM.

So you would say that after upgrading my GPU the best step to take would be upgrading to a 3770K so I can take full advantage of PCIe 3.0 even though I'd still be running 1600MHz RAM?
 
So you would say that after upgrading my GPU the best step to take would be upgrading to a 3770K so I can take full advantage of PCIe 3.0 even though I'd still be running 1600MHz RAM?
If PCIe bandwidth turns out to be the biggest bottleneck, then yes.
 
I would probably just get 2133 which is the max my board supports and is about the same price.

End-game would be getting a 3770K to take advantage of PCIe3.0

GPU --> RAM --> 3770k --> hold out until Skylake in 2015.
That's what my plan is as well.

Already got the GTX 780, looking at DDR3 2133 and a 3770k right now :D

My biggest concern is I'll get a 3770k that's a dud overclocker. Would suck to "upgrade" to a chip that can't hit the same clocks as my current i5 2500k...
 
That's what my plan is as well.

Already got the GTX 780, looking at DDR3 2133 and a 3770k right now :D

My biggest concern is I'll get a 3770k that's a dud overclocker. Would suck to "upgrade" to a chip that can't hit the same clocks as my current i5 2500k...

I'm going to be hunting for a used 3770K with proven OC ability after I get a new GPU.

RAM is more complicated. Do I purchase a 2133 kit or purchase a lower MHz kit and attempt to OC to 2133 while adhering to the 1.5V IB Maximum?

Getting the right kit that will OC to 2133 and not exceed 1.5v may be difficult but you would save a significant amount of $ OCing 1600/1866 instead of buying a 2133 kit outright.
 
Getting the right kit that will OC to 2133 and not exceed 1.5v may be difficult but you would save a significant amount of $ OCing 1600/1866 instead of buying a 2133 kit outright.
Would you?

I see a 16GB (2x 8GB) kit of DDR3 2133 on Newegg going for $117 right now. Their cheapest DDR3 1866 (2x 8GB) kit is $133.

Might as well get the 2133. :p
 
Not the first game to see gains from faster memory. There is one for Batman Arkham City that shows decent gains up to 2133 and less as it gets to 2400. I'd like to see stepping of BF4 with 1600/1866/2000/2133/2400.

I had not heard about that but decided to search for it. Found it here: http://hexus.net/tech/reviews/ram/47181-gskill-ripjawsx-f3-17000c11d-8gbxl/?page=4

There are a few other similar articles on Hexus that show similar graphs. There is like 30% increase in average fps moving from 1333 to 2133.
 
Would you?

I see a 16GB (2x 8GB) kit of DDR3 2133 on Newegg going for $117 right now. Their cheapest DDR3 1866 (2x 8GB) kit is $133.

Might as well get the 2133. :p

Would a 2133 CAS 11 kit really out perform a CAS 8 1600 kit?

I'm running 1600MHz 8-8-8-24 1T right now.

CAS 11 11-11-11-28 looks like a side-grade.

I have found some CAS 10 2133 kits but they are expensive ($200)
 
As an Amazon Associate, HardForum may earn from qualifying purchases.
Would a 2133 CAS 11 kit really out perform a CAS 8 1600 kit?

I'm running 1600MHz 8-8-8-24 1T right now.

CAS 11 11-11-11-28 looks like a side-grade.

I have found some CAS 10 2133 kits but they are expensive ($200)
Well, keep in mind that high frequency helps offset higher CAS latency to a degree. Wikipedia has a nice chart for figuring this out:

http://en.wikipedia.org/wiki/CAS_latency#Memory_timing_examples

Near the bottom of the chart, you can see DDR3 2000 @ CAS 10 is equal to or faster than DDR3 1600 @ CAS 8 as far as latency is concerned (but with MUCH higher bandwidth).

DDR3 2133 is slightly faster than that, so you should be pretty happy with CAS 10 or 11 (your latency wont get any better or any worse, but your bandwidth will improve substantially).
 
As an Amazon Associate, HardForum may earn from qualifying purchases.
I love how this is all exciting and all but id rather have a game utilize all my cores on my CPU then need faster memory speeds...
 
Well, keep in mind that high frequency helps offset higher CAS latency to a degree. Wikipedia has a nice chart for figuring this out:

http://en.wikipedia.org/wiki/CAS_latency#Memory_timing_examples

Near the bottom of the chart, you can see DDR3 2000 @ CAS 10 is equal to or faster than DDR3 1600 @ CAS 8 as far as latency is concerned (but with MUCH higher bandwidth).

DDR3 2133 is slightly faster than that, so you should be pretty happy with CAS 10 or 11 (your latency wont get any better or any worse, but your bandwidth will improve substantially).

Seriously Awesome info, thanks!
 
Back
Top