[H]ot - Swiftech MCW-80 $25

Cecil

Supreme [H]ardness
2FA
Joined
Jun 17, 2009
Messages
5,097
http://www.performance-pcs.com/cata...t_info&cPath=59_971_240_582&products_id=27860


If you have any interest in water cooling your vid card/s, you cant beat that price. They are compatible with all modern cards (might have to get certain adapters from the MCW-60 or MCW-82, the mounting kits are universal for all of their blocks). I picked up two, even though I dont have a loop right now and only one vid card. But plan to use them with the new Swiftech H220 when it comes out.
 
These are nice but if you have to buy a mounting kit to fit a HD7970 its probably cheaper just to order the MCW82-79X0 to being with.

I wish the MCW80 fit the HD5770 without modifying it for hole spacing. I have two HD5770s that I would like to water cool and for $25 a water block it would be a good deal but it doesn't fit.
 
These are nice but if you have to buy a mounting kit to fit a HD7970 its probably cheaper just to order the MCW82-79X0 to being with.

I wish the MCW80 fit the HD5770 without modifying it for hole spacing. I have two HD5770s that I would like to water cool and for $25 a water block it would be a good deal but it doesn't fit.

The mounting kits from Swiftech are usually either free, the cost of shipping, or like $8 depending on the block. The MCW-82 79xx is just the MCW-82 with the extra adapter, and Im pretty sure they give it to you free if you request it. Like they do with AMD adapters on their CPU blocks now.
 
The mounting kits from Swiftech are usually either free, the cost of shipping, or like $8 depending on the block. The MCW-82 79xx is just the MCW-82 with the extra adapter, and Im pretty sure they give it to you free if you request it. Like they do with AMD adapters on their CPU blocks now.

It's not free.

The MCW82 has a high housing top that cost $19.50
http://www.swiftech.com/MCW82HOUSING.aspx



The MCW82-7900 has the high housing top and the special surface block that cost another $38.50

http://www.swiftech.com/MountingKitMCW82-7900.aspx


So if you plan on buying in on the deal to cool a HD7950\HD7970 you will have to fork out almost $60 extra to get the equivalent of the MCW82-7900.


Its a great deal if it fits but you have to be certain you know it will fit.
 
You dont need the top part, thats just for an increase in flow rate.

The bottom plate I guess is "needed" though I remember when mounting the MCW60 to the 4 series cards, it was too high and wouldnt make contact. So the V2 came out for them. But you could sand down the mounting feet on the originals to make them work too. So with a bit of modding, I would guess you could make it work on the 7900s without buying anything, but some researching should be done before buying for that purpose.

Im figuring on using one on a refrence 670, which already has a VRM heatsink, and ram doesnt need to be cooled really, so $25 was a great deal for that card.
 
$3.99 for first class, so $8 + $25 = $33. Still cheaper then any other way of water cooling a 7900 card.
 
BTW, ford those that might be interested, there are currently some discount coupons at PPCs good thru 02/01/13.

Spend $50-$250, get 6% off: "HARBOWL-6"
Spend over $250, get 8% off: "HARBOWL-8"
 
BTW, ford those that might be interested, there are currently some discount coupons at PPCs good thru 02/01/13.

Spend $50-$250, get 6% off: "HARBOWL-6"
Spend over $250, get 8% off: "HARBOWL-8"



I have been thinking about this water block all day....

The main question I ask myself is "What will I put it on?"'. :D

Knowing that I can spend more money there and get a decent discount is food for thought for making a large order. Thank you. :)
 
Last edited:
I scored on the deal. :D But.... I ended up spending close to $500 on other water cooling gear. :( :)
 
I'm tempted to pick one up just in case later on down the road.

Thats why I got mine. Planning on getting the Swiftech H220, and adding these to it.
Might go with an XSPC RX240 raystorm kit if I cant hold off waiting lol.

My blocks got here today.
 
Thats why I got mine. Planning on getting the Swiftech H220, and adding these to it.
Might go with an XSPC RX240 raystorm kit if I cant hold off waiting lol.

My blocks got here today.

Youd be happier with the rx240 and d5 combo for sure.
 
Youd be happier with the rx240 and d5 combo for sure.

Not the one I was talking about. That is way too much money to pay for water too me. Ive done $300+ loops in the past, and been annoyed that it doesnt help the OC on modern CPUs much over an AIO cooler.

I was looking at the 750 res/pump combo for $175. $35 more then the Swiftech.


Water is on hold though, since I decided to get a U2713HM.
 
I'm tempted to pick one up just in case later on down the road.

Sounds like a good idea but that shipping is terrible for me.


The only difference between the MCW-80 and the MCW-82 is that the MCW-82 has a ported top that flows better.

I am going to port the top myself to improve flow on the MCW-80.



The only bad part about this deal is the shipping. For me it's probably $12 because I live on the opposite coast of Performance PCS.


I ordered everything that I needed to get my next water cooled build completed and the costs was very competitive to other shops and with the 8% off coupon I feel like I put in an honest effort to stretch my budget out on my build.


I like Performance PCS and I like Frozen CPU but this order Performance PCS got the deal and it was mainly because they had the MCW-80 on sale. I am going to put the MCW-82 on a HD 7870 Tahiti. It's a custom PCB and not water blocks are available for it and I doubt any full cover blocks will be available for it since it looks like a limited made card that only a few card builders are making.



This one good deal on this block turned into a big purchase.

Everything I ordered.


1 x Alphacool NexXxoS XP³ Light - Acetal Edition CPU block
1 x Alphacool NexXxoS Monsta 240 Radiator
1 x EK-LGA115x TRUE Backplate (EK-LGA115X)
1 x Swiftech MCW80™ High Performance GPU Waterblock
1 x Koolance PMP-500 G1/4 BSP High-flow Pump (PMP-500)
3 x Danger Den G1/4 High Flow Fittings - 1/2"
1 x Alphacool Decoupling Kit Eheim/Hydor 4 Decouplers
8 x Scythe Gentle Typhoon 120 mm by Nidec Servo Corp. - Ultra High Speed - Sleeved (D1225C12B5AP-15)
1 x EK-RES X3 150 Reservoir (EK-RES-X3-150)
1 x Monsoon Silver Bullet Antimicrobial G1/4 Plug
1 x Bitfenix Hydra Pro 5 Channel 30W Fan/LED Controller with Slide Control (HYDRA-PRO)
 
I've been putting off buying the lamptron FC-4 that they have on sale for $20 due to shipping. I ended up ordering the both.
 
Back
Top