When processor supports 8GT/s speeds get out

6311

Weaksauce
Joined
Oct 11, 2010
Messages
77
nividia saed no 1 cpu with this 8GT/s speeds

GeForce GTX 660 Ti supports PCI Express 3.0. The Intel X79/SNB-E PCI Express 2.0 platform is only currently supported up to 5GT/s (PCIE 2.0) bus speeds even though some motherboard manufacturers have enabled higher 8GT/s speeds.

Not a native English speaker
 
There's a huge difference with a GPU supporting PCI-e 3.0 and actually being able to use it. No current generation single GPU can saturate a PCI-e 2.0 bus yet, so it's a bit irrelevant.

Think of PCI-e 3.0 as a fast car, like a Ferrari or Corvette. It's capable of handling very fast speeds. Now think of current gen GPU's as a 4 cylinder engine placed inside either car...it's not going to be able to push that car to it's speed capability.

Loose analogy, I know. But, I hope it gets the idea across.
 
I ASK:
But the price sky
There is something cheaper?
Or
Will be on 2013?
 
High price?

Are you looking for something cheaper than the 660Ti with 8GT/s?
 
Intel® Core™ i5-3550:
DMI 5 GT/s
PCI Express Revision 3.0

Which do you want: the PCI-e bandwidth or the DMI bandwidth?

Your original post makes it sound like you were looking for PCI-e bandwidth but now i'm not sure.
 
There's a huge difference with a GPU supporting PCI-e 3.0 and actually being able to use it. No current generation single GPU can saturate a PCI-e 2.0 bus yet, so it's a bit irrelevant.

Think of PCI-e 3.0 as a fast car, like a Ferrari or Corvette. It's capable of handling very fast speeds. Now think of current gen GPU's as a 4 cylinder engine placed inside either car...it's not going to be able to push that car to it's speed capability.

Loose analogy, I know. But, I hope it gets the idea across.

Horrible analogy actually...

An engine is primarily what makes a "fast car."

PCI-E 3.0 is a bus, it is the width of the "highway" the data goes through. Currently a 660 Ti doesn't push enough traffic, so to speak, to max out a 2.0 bus, let alone a 3.0 bus.

You can also simply look to the term "bus" to see the obvious meaning behind the word, with PCI 3.0 being a bus with a larger carrying capacity. Terms are generally created with some logic behind them...
 
Well, sorry, I thought me stating that it was a loose analogy would tip everyone off. Didn't realize I needed to be an elitist to post in this thread. :rolleyes:

I'll elaborate just for you: Yes, an engine (the GPU) makes for a fast car, but what is the same engine, be it a 4, 6, 8, or 12 cylinder, better in for potentially going faster based on the physical design...a Ferrari (PCI-e 3.0) or a Scion xB (PCI-e 2.0 or lower)?

You see, aerodynamics would be the bus width, and the engine would determine top speed. They play a logical role together.
 
I ASK ONLY FOR CPU
WITH Bus speed ? 8 GT/s
Like this:
http://www.cpu-world.com/CPUs/Xeon/Intel-Xeon E5-4650 - CM8062107184516 (BX80621E54650).html


DMFD-Minister Writing to the Point
but Offered to servers not for home
Server processors have two main busses, the 1) memory bus and the 2) QPI bus. The QPI bus then connects to a controller (as well as interconnecting the cpu's) and splits off into PCI-e bus and DMI bus.

Desktop processors have internalized the QPI bus (do they still even use it?) and now have a 1)memory bus 2)DMI bus and 3) PCIe bus.

Trying to compare the desktop DMI bus to the server QPI bus doesn't make sense, they're not doing the same things.

What are you trying to do? Is this just research or are you worried about saturating some bus and if so what is your end application?
 
Last edited:
Video Editing Software

Three dimensional software very strong
I Have a very strong CPU

3 VIDEO CARD 7850

heavy games
 
No games will saturate any bus pcie-2.0, especially not 7850's
Video Editing software is usually limited by CPU speed, not bus bandwidth

is your 3x7850 crossfire? did you already buy them?
What 3d software?
 
How many cores do you need? If you only need a 4c/8t, then just get an E5-2643, they're cheap, less then a grand. If you need an 8c/16t, the E5-2650 is only a bit more but you give up a ton of clockspeed to double your core count.
 
Almost all of the Asrock X79 boards officially support the Xeons, as does the Asus P9X79 WS. Just check the compatibility lists before you decide on a motherboard.
 
I ASK ONLY FOR CPU
WITH Bus speed ? 8 GT/s

whichBUS.png
 
You have a few options: You could get 4-Core, 6-Core, or 8-Core.

It looks like you want something fast, and for 3D modeling, I'd probably get a higher core-count. So I'd probably go with the E5-2650. These things are VERY FAST.

http://ark.intel.com/products/64590...-2650-(20M-Cache-2_00-GHz-8_00-GTs-Intel-QPI)

Make sure your server motherboard supports it.

EDIT: I do not think you will find a desktop i7 chip with 8GT/s QPI any time soon.
 
Last edited:
Back
Top