- Joined
- Feb 8, 2005
- Messages
- 13,421
I've noticed some issues copying data to my Windows Server 2008 R2 VM recently. I seem to get a max of about 6MB/s from my laptop to the VM, across a gigabit network. This works just fine for copying most of my homework over, as it's just a bunch of text files. However, I'm re-encoding a lot of video lately, and it's obviously unacceptable for copying several gigs of data. At the time, I didn't want to screw with it, so I just decided to go back to my old Solaris-on-bare-metal setup. Unfortunately, for some odd reason, Solaris 11 doesn't want to read my NTFS-formatted drives. So, I figured, I'd just toss Solaris 11 in a VM, copy the data across ESXi's virtual network, and then flip back.
Holy cow. The virtual network is the slowest thing I have ever seen. Over 48 hours, I've managed to copy 61.3 gig of data. Not only that, but while attempting to copy the data over, remote desktop becomes so slow that it's nigh unusable. It took me about 5 minutes from the time I hit "Connect" to the time the desktop was visible. It takes 30 seconds between when I click on a tab in the vSphere Client and when the tab finally switches over. Unfortunately, VMWare hates us Mac users, so I have to use a VM (hosted on the ESXi box) to use vSphere. I've got another 2.7TB of data to copy over. At this rate, it will take a little under 100 days to do it.
Can anyone offer any advice or troubleshooting procedures I should be going through? My all-in-one configuration is as follows:
Physical: e3-1230, 8GB, 3x3TB, 1x1TB (datastore), host OS on USB drive
VM1: Server 2K8 Std, 2 cores/4GB allocated, used for vSphere Client
VM2: Server 2K8R2 Std, 2 cores/4GB allocated, used for file sharing via NFS/SMB, 2x3TB connected
VM3, Solaris 11 11/11, 8 cores/8GB allocated, destination, 1x3TB connected
I realize I'm oversubscribed, going to try and fix that now. I'm hoping that I've just chewed up all my RAM. Should take about 30 minutes with the slow speed of things. Until I do get that fixed, can anyone offer any other suggestions I could try?
Holy cow. The virtual network is the slowest thing I have ever seen. Over 48 hours, I've managed to copy 61.3 gig of data. Not only that, but while attempting to copy the data over, remote desktop becomes so slow that it's nigh unusable. It took me about 5 minutes from the time I hit "Connect" to the time the desktop was visible. It takes 30 seconds between when I click on a tab in the vSphere Client and when the tab finally switches over. Unfortunately, VMWare hates us Mac users, so I have to use a VM (hosted on the ESXi box) to use vSphere. I've got another 2.7TB of data to copy over. At this rate, it will take a little under 100 days to do it.
Can anyone offer any advice or troubleshooting procedures I should be going through? My all-in-one configuration is as follows:
Physical: e3-1230, 8GB, 3x3TB, 1x1TB (datastore), host OS on USB drive
VM1: Server 2K8 Std, 2 cores/4GB allocated, used for vSphere Client
VM2: Server 2K8R2 Std, 2 cores/4GB allocated, used for file sharing via NFS/SMB, 2x3TB connected
VM3, Solaris 11 11/11, 8 cores/8GB allocated, destination, 1x3TB connected
I realize I'm oversubscribed, going to try and fix that now. I'm hoping that I've just chewed up all my RAM. Should take about 30 minutes with the slow speed of things. Until I do get that fixed, can anyone offer any other suggestions I could try?