New build = Code 00, no video signal.

Doodlehed

Limp Gawd
2FA
Joined
Feb 1, 2012
Messages
155
This is in regards to this system:
Fx 4100 on
asrock 870fx deluxe 4
Antec 620w psu
2x2 gig gskill 1333 10666
Sapphire hd 6870

So everything's put together powered on and I'm not getting any video signal. The mother board is reading out 00 and if I read correctly it means BIOS OK going to boot os. Everything's not okay clearly I don't have anything on my screen. Gpu fan is going, CPU fan is on.

My hard drives are iffy and opticals. I'm using an old junk sata and I might try an ide hdd. But I should get video without a hdd and optical installed right?

I don't have onboard video or a spare pci graphics card. I only have an old agp video card.

I unplugged everything reseated everything, moved my rams sticks around and nothing has changed.

Maybe I should try the gpu in the other pci e slot?

Another thing is I don't know what version of BIOS this motherboard has. Only the latest release supports the bulldozer chips. Though, I've read about people just underclocking their fx chips and getting BIOS flashed. Wouldn't this require some video signal?

So I'm bummed at a loss for ideas. Maybe someone else has something I forgot.

The motherboard has an onboard power button so I didn't hook my case power button or anything else on the bottom of the mobo. Does it require that ground to be attached?

Super frustrated. Don't want to have to rma my video card and find out that's not it. I wish I had a crappy gpu to try. I also tried two monitors.

Sorry if this looks dumb I'm mobile right now since I tore into my old PC for parts.
 
Well, the first thing I would do is take everything OUT of the case.

What MB do you have?? I looked on AsRock's website and there is no 870 FX Extreme 4? There is an Extreme 3 but it doesn't take AM3+ chips......there is an 890FX Extreme 4 however that is capable of the FX 4100 AM3+
maybe this won't work because you have an incapable motherboard?

Now that the MB is out, put it on top of the box it came in.
Put in one stick of RAM, make sure the cpu and HSF are properly seated.
Now before you attach the PSU.....pull the CMOS battery and clear the CMOS via jumper, wait a couple minutes and restore that.

Now plug in the PSU and attach the 24 pin, 8 pin, put in the GPU and attach its power cables.

Nothing else.

Now try and boot. If it's a go you should get the post scren and then it will ask for the boot drive.

If that works, flash to the newest BIOS version then load a fresh version of your windows.
 
Last edited:
I tried that with no luck. I even took out the CPU and it threw the same code. Must be my BIOS. If not I don't know what else it could be.
 
Kinda tired of messing with it. I've been at it a good five hours with zero progress. Ill have to find a cheap am3 somewhere to throw in there.
 
Sorry I didn't see where you asked about my mobo. I typed it wrong. 890fx deluxe 4.
 
Looks like it has the 1.5 BIOS so I'm definitely running the wrong BIOS. But shouldn't I at least get some video signal? Sorry I didn't know they labeled it on the southbridge with a sticker.
 
I would borrow another GPU, or try the GPU in one of the other PCI-e slots.

If thats a no go, then you'll need to RMA the board.
 
Looks like it has the 1.5 BIOS so I'm definitely running the wrong BIOS. But shouldn't I at least get some video signal? Sorry I didn't know they labeled it on the southbridge with a sticker.

You may need to find an older processor that will work with that BIOS, it's an old trick we used to use for motherboards to update the BIOS, and then throw in the new CPU. The boards we used that trick on wouldn't post either.
 
I've tried the gpu in the other pci e slot. Tried a dif monitor.

I've called no less than 15 computer repair shops in a 50 mile radius and not one of them have been able to help me. A couple had some am3s but they wanted like 60I bucks to fix it and I have to let them keep it over night...on top of 40$ in gas. I think not sir. I guess ill rma it. Should I go through the manufacturer or newegg? Probably asrock eh?
 
I've tried the gpu in the other pci e slot. Tried a dif monitor.

I've called no less than 15 computer repair shops in a 50 mile radius and not one of them have been able to help me. A couple had some am3s but they wanted like 60I bucks to fix it and I have to let them keep it over night...on top of 40$ in gas. I think not sir. I guess ill rma it. Should I go through the manufacturer or newegg? Probably asrock eh?

Newegg if less than 30 days, you'll get a new board without any hassle.

If you have to go through AsRock ask them to Cross-ship you a NEW board, don't let them "fix" it for you.
Chances are you will get the same board back without a thing being done to it.

You'll need to be forceful and insist on a new board, tell them you have done all the troubleshooting you can do and it all points to the motherboard, don't let them run you around doing a bunch of stupid things. Everytime they tell you to try something, tell them you already did it and nothing happened positive.
 
You may need to find an older processor that will work with that BIOS, it's an old trick we used to use for motherboards to update the BIOS, and then throw in the new CPU. The boards we used that trick on wouldn't post either.

+1

Old BIOS... borrow an AM3 cpu (Phenom II, Athlon, Sempron) to update the bios... 99% sure the problem with then be solved...

The MoBo throws the same code with or without the CPU because it doesn't recognize the new FX chip... 870 was not built to work with FX chips, though some boards can get a BIOS update to make them work... Your board is one of them... try it...
 
+1

Old BIOS... borrow an AM3 cpu (Phenom II, Athlon, Sempron) to update the bios... 99% sure the problem with then be solved...

The MoBo throws the same code with or without the CPU because it doesn't recognize the new FX chip... 870 was not built to work with FX chips, though some boards can get a BIOS update to make them work... Your board is one of them... try it...

I'm not so sure about that.
I've had a number of boards that needed to be updated to accept a newer CPU.
This was especially frequent in the S775.
I used to use a P4 to run the board and flash the BIOS to place a C2D or Quad.

That said, the P4 would always POST up and show a video signal, and not display any bad codes.
 
Back
Top