Need a gigbit switch...

totalanni

n00b
Joined
Aug 5, 2010
Messages
57
Could you please recommend me a good >16 port 10/100/1000 switch, that has vlans, and link teaming for my esxi box that hosts pfsense?
Currently using a netgear 28 port 10/100/1000 that has 2 uplink ports that can do 1000...

Basic home usage...
Heavy fileserver traffic...

Thank!
 
any dell / hp managed would do, i would keep an eye out for sales on dell power connects.
 
Do a search...lot of these threads. I use a HP1810G-24 and a Cisco SG300-28 in my vSphere lab.
 
Im hoping to win a 6024 and 6224...
I think im going with the Dell's...
Look at their manual, i saw they had remote management software...
I have some experience with Cisco Net Assistant, and really liked it...

Plus these dells are dirt cheap compared to cisco/linksys/netgears!
Thanks guys!
 
We should freakin sticky this question.

For </= 24 ports of gigabit for under $500

HP Procurve: 1800, 1810, 2824
Dell Poweredge: 28xx, 27xx (if you are ok with the fact that it has no CLI or console), 5224, 5324, 5424, 6024
Cisco: SG300 series

100/100 users will buy one of the switches listed here. All can be had on ebay used for usually <$250 in decent shape.

Sorry to wig out but this will be the 2nd or 3rd time I have had to type that list in the last 30 or so days.
 
We should freakin sticky this question.

For </= 24 ports of gigabit for under $500

HP Procurve: 1800, 1810, 2824
Dell Poweredge: 28xx, 27xx (if you are ok with the fact that it has no CLI or console), 5224, 5324, 5424, 6024
Cisco: SG300 series

100/100 users will buy one of the switches listed here. All can be had on ebay used for usually <$250 in decent shape.

Sorry to wig out but this will be the 2nd or 3rd time I have had to type that list in the last 30 or so days.

It's ok muffin, want me to get you a ice pack for them fingers ? Lol

Btw the Dell 5224 does have cli
 
Cisco 2960 catalyst switches could also work. Theres one on ebay right now for $91 bux
 
For the money, I would take a PC5224 over the 27xx any day. The only drawback I can think of is the need to save the running config to boot config via console session (Serial/SSH). Otherwise, power loss makes config go bye-bye.
 
For the money, I would take a PC5224 over the 27xx any day. The only drawback I can think of is the need to save the running config to boot config via console session (Serial/SSH). Otherwise, power loss makes config go bye-bye.

Every time i make a change on the 5224 i save it via webgui. no need for serial/ssh to save it etc etc.
 
Every time i make a change on the 5224 i save it via webgui. no need for serial/ssh to save it etc etc.

It's saved to running config only- remove power for more than a couple seconds and your changes are lost. As far as I know the only way to save it to the boot config (permanent) is to use the CLI.
That being said, as long as the power stays on the switch can run for years.
 
It's saved to running config only- remove power for more than a couple seconds and your changes are lost. As far as I know the only way to save it to the boot config (permanent) is to use the CLI.
That being said, as long as the power stays on the switch can run for years.

Not true!! I've only used the CLi to factory reset my switch, the web GUI will allow u to save it too.
 
Back
Top