Beep Code Decoding -- AT Motherboard (!!) -- Think Prehistoric

starhawk

[H]F Junkie
Joined
Oct 4, 2004
Messages
8,908
I know, I know, AT motherboards are soooooooooo 1992. But I'm restoring my first computer and having more than a bit of trouble here :rolleyes: Feel free to call me crazy *after* you tell me what I did wrong with it.

Motherboard is a Pine Technology PT-319A Baby AT, with an AMI 386SX BIOS chip. It's really little ;) CPU is a 486SX-33 (not sure about the speed, but suffice to say it walks instead of running) made by Texas Instruments, presumably under Intel license. Board has six ISA-16 slots and not a whole lot else -- even the drive controllers are off board!

This system seems to have problems with drive controller cards, by which I mean it's very persnickety -- I've yet to find one that will work correctly. The current one is this model, and it's the one giving me a bellyache right now.

It arrived from eBay this morning. I configured the jumpers to be correct for my system, plugged it in, booted up... and got BEEP BEEP BEEP for my trouble. Punching the top of the frame did not alter the system's disposition, and the local computer shop doesn't know this dusty old stuff from twenty years ago. This leaves me making some choice beeps of my own :mad:

I recorded the beep code and uploaded it here: http://www.filexoom.com/showfile-27334/beepcode.wav

Please listen to it and help me figure out what's wrong. Thanks, all!
 
It's actually two low beeps and then a bunch of high beeps. Might be the vid card... I'm not getting a video output from it.

The "beep beep beep" in my post above was not meant to be an accurate representation of the sound... sorry for the confusion.
 
Great news, folks, the code has disappeared and the machine boots. I think I know what was wrong.

In a modern computer, the CMOS battery is a coin type, usually a CR2032. In this heap, as was the norm back then, it's a large-ish lithium can battery, soldered onto the mainboard. 3.6V rechargeable, and you basically can't remove it.

I had left the computer unplugged for some weeks while I was waiting for another HDD controller card, and my best guess is that the battery drained over that time until it was dead, and so when the computer went to boot up, it couldn't read the boot ROM (due to the battery problem) and so it couldn't boot. I come back a couple hours later (by which I mean now) and it fired right up.
 
Motherboard is a Pine Technology PT-319A Baby AT, with an AMI 386SX BIOS chip. It's really little ;) CPU is a 486SX-33 (not sure about the speed, but suffice to say it walks instead of running)

That's a whopping 33Mhz of raw CPU power. How much memory do you have on those 30 pin SIMMs. I'm seriously showing my age.;)
 
This makes me want to build an old school rig from before my time. I had a 486 PC at one time, but I don't remember the details. I dont know what happened to it, but I wish I still had it so I can play some Civilization vintage style.
 
eBay and persistence are your two best friends with these things. I've gone through at least 4 IDE/floppy controller cards before getting one that worked -- and then only because I realized that there was an IRQ conflict between the sound card's onboard CD-ROM controller feature and the other, primary IDE controller card.

Also: brands don't matter; everybody was new back then, so names weren't important. Still true -- either it works or it doesn't, regardless of vintage. If it doesn't work, find one that does.

And of course, be prepared to do patchwork engineering on occasion. Example: the power supply currently in this box had a soldered-on switch that I didn't want to use. Solution? Cut off the old switch and stick on some spade connectors to match the new one, complete with insulator boots from the old supply (which had given up the ghost rather rudely after I stupidly plugged a floppy drive power connector in backwards).

Hey, would anyone be interested in me posting a thread about this thing somewhere here? Where would I even post it? I'm pretty sure that I'm almost done with it... but hey, if it helps someone else, I'll put it up!
 
Pine Technology eh?

Obscure names like that bring me back to the days of going to Wim's to look up make and model and possibly even BIOS upgrades.
 
Nowadays there's stason.org ;) comes up real high on goooooooooooooogle if they have anything.
 
Bah, I'm too young to believe in old age :D you've just got a lot of experience! (That's a good thing, IMO.)
 
Back
Top