Cisco Catalyst 3560 autoload config on boot?

jman0war

n00b
Joined
Jan 16, 2007
Messages
10
I hope this isn't a dumb question but is it possible to configure a Cisco Catalyst 3560 switch to auto-load a config when it boots up?
 
Are you talking about auto-loading an alternate configuration? Need more info.

It loads config.text automatically...
 
Need more info.

There are two different configs on most Cisco switches. Running-Config and Startup-Config. When you edit the configuration, you're editing the Running-config. You need to do a write, write mem, copy run start to get the switch to boot up with that config (Running-config or the one you're editing).

That's some pretty basic cisco config stuff, but i/we don't know what you're really trying to do.
 
If it's not doing it then your config register is probably set to 0x0 or something weird.

conf t
config-register 0xF
^Z
wr mem
reload
y
 
Thanks for the replies.

It's not my area, but we have one of these at my workplace and it falls over (shuts down).
When I power it back on, the switch has lost its config and won't give any IPs. Network guy has to come in and copy over a config.
I just wonder if the switch can be made so that it automatically loads the config (running config i presume) when it boots up. Surely it's not necessary to drag a guy from networks in everytime.
 
Get a new network guy. He's doing something wrong.

Is he a consultant? Billing hourly, maybe?
 
He's probably insuring a job for himself.
But the billing issue is none of my business.
I'm just trying to avoid the downtime for myself.
 
Fire that guy...

He's probably doing:

switch#reload in 24:00 (or some other number of hours)

Then when the switch reloads, he gets a call, copies the config to the device, doesn't save it, issues the "reload in" command again and drops his bill off at the reception desk...
 
He's probably insuring a job for himself.
But the billing issue is none of my business.
I'm just trying to avoid the downtime for myself.

For sure. I'd escalate this to your manager though, or whoever is responsible for this guy. Saving and having the stored config boot at start-up is basic networking. So if this is hurting your productivity, I'd start yelling.
 
Definitely sounds fishy. There is no reason why that switch won't boot a working configuration unless he is doing something crooked.

lol, wow. The balls on that guy...
 
I hardly know Cisco, and even I agree with everybody that this "network" guy is ripping off the company/business you work for.
 
Back
Top