Mobo stuck at PCI-e X2

novadaemon

Gawd
Joined
Aug 24, 2006
Messages
862
I have an MSI K9A2 CF-F V2. The top slot is always stuck in x2 mode. I have tried a 4890, a 4850 and 4850 crossfire. No matter what I do it doesn't change.

When I put my 4890 in the bottom slot it runs at x8 but airflow is restricted a little.

I have reset the cmos, and I've taken the battery out to try to reset it that way. I've reseated my cards, and I don't know what else to do.

There is a noticeable performance hit running at x2.


Does anyone have any advice on how to remedy this?


EDIT: My issue is even weirder. I reinstalled windows and it is still at x2, however it will only run at x2 with ATI cards...

I tried a Geforce 7800gt and 8800gts and they both ran at x16, but my 4850's, 4890 and x1900xtx only run at x2.
 
Last edited:
Your OS isnt in your sig. Are you on XP, Vista, 7?

You have the current motherboard BIOS installed?

What about chipset drivers?

I'll assume you are already on up to date video drivers.

If you have a spare hard drive sitting around you could pop it in and do a quick OS install with just video drivers, maybe chipset, and see what GPU-Z reports then.
 
That board is a 790X which should have one 16x and one 8x PCIe slots. Did it ever work at 16x or has it only ever done 2x since you got it?
 
That board is a 790X which should have one 16x and one 8x PCIe slots. Did it ever work at 16x or has it only ever done 2x since you got it?

It worked at x16 with my 8800gts, and retesting it confirms it CAN work at x16 but it hates ATI cards for some reason.
 
That's pretty messed up that ATI cards won't work right in an AMD board, but nVidia will, heh. Particularly since they're the same generation hardware.
 
Back
Top