Is MSI a good brand?

alf717

Gawd
Joined
Dec 8, 2006
Messages
907
Over the years I have experienced brands like ASUS, ECS, and Gigabyte brand motherboards. Can't really argue much about either brand but right now my older ECS board is starting to slowly die. Right now my only concern is the board I'm interested in only has a 1 year warranty where as all my other boards have had 2+ years. So what do you all think of MSI as a brand? The board I'm interested in is the MSI 790XT-G45
 
Never had any issues with MSI products. But, as always, check reviews on Newegg. They are more telling than anything.
 
Never had any issues with MSI products. But, as always, check reviews on Newegg. They are more telling than anything.

Yea I'm iffy about this particular board now that you mentioned that. Recent reviews seem to be mixed between working well and failing within a few months time.
 
I have use MSI without any problems in the past.You will hear pepole bitch more than those who have no problems.It's the same for all brands.
 
i personally like own/like msi but i do love asus and gigabyte aswell.ive had several problems with gigabyte but they were always helpful and took care of me when i had problems!!i do however believe asus is on top of thier game when it comes to making motherboards though!!
 
Newer MSI boards are generally quite good. A few years ago they put out some pretty poor products, but recently they've stepped it up a lot. I wouldn't quite put them on the same level as ASUS and Gigabyte, but they're pretty close.
 
The MOFSET/VRM bits could stand to be a bit more beefy, and the CPU power section could use some cooling, but otherwise it looks like a solid board. Probably won't overclock as well as some, but it's not going to blow up or anything either.
 
I have used MSI boards in my last two builds, one Intel and one AMD. I have never had any issues that weren't caused by me with them. This 790FX-GD70 I'm using now is excellent, I did break one of the nics by accident and MSI replaced the board no problems.
 
I would put MSI them below ASUS, Gigabyte, EVGA, Intel and Supermicro.

But ahead of Biostar, ECS, FOXCONN and ASROCK.
 
MSI generally makes great motherboards and usually for a reasonable price and has usually been among my better overclockers. I have done many builds with them and not had a single issue. Also had good luck with overclocking and stability with Biostar, Asus, Gigabyte, Epox (defunct) and DFI and through the years. Only ones that have given me issues here and there have been Shuttle, ECS, Foxconn and ASRock.
 
i've been running an msi kn7 neo for the past 5 years. the system is on 24/7 except when i'm deployed
 
I've owned several MSI board and graphics cards over the years, and only once had a problem cause by a cheap chipset fan on a NF4 board dying.


Now ECS on the other hand... junk is too nice of a word.
 
I've owned several MSI board and graphics cards over the years, and only once had a problem cause by a cheap chipset fan on a NF4 board dying.


Now ECS on the other hand... junk is too nice of a word.

north bridge fan on mine died too, upgraded to a coolmaster fan+chipset which died even faster :(
 
north bridge fan on mine died too, upgraded to a coolmaster fan+chipset which died even faster :(

by the time I realized it was dead, I had lost some functions such as the SATA and network controllers. But it was three or four years old by that point and I was already in the process of upgrading. So I just tossed it.
 
by the time I realized it was dead, I had lost some functions such as the SATA and network controllers. But it was three or four years old by that point and I was already in the process of upgrading. So I just tossed it.

my network controller worked fine, i just lost 2 sata connectors, which magically worked again when got a new fan. that chipset gets hot as fuck!
 
I've owned several MSI board and graphics cards over the years, and only once had a problem cause by a cheap chipset fan on a NF4 board dying.


Now ECS on the other hand... junk is too nice of a word.

I think every NF4 board had that problem, the a8n-e that I had went out like crazy on peoples boards, I remember they had some special link if you had that board you could just get them to send you a new chipset fan from online just by entering your serial. NF4 was the hottest chipset ever.
 
I have that board and it's great. No issues at all. And its my second MSI motherboard.
 
I've owned several MSI board and graphics cards over the years, and only once had a problem cause by a cheap chipset fan on a NF4 board dying.


Now ECS on the other hand... junk is too nice of a word.

Man, everyone hates my cheap parts. I must be one lucky sum'bitch.

First everyone claims Ultra PS's suck and die out... my free ($40+$40 MIR) 500w Ultra has lasted 4+ years steady.

Now it's my ECS motherboard... got it at the same time as the "junky" Ultra PS above. Pure junkiest board they've ever made I must say. Came free as well with my Intel CPU and manyyyyy other combos (p4m890.... very popular free bundled mobo at Fry's a while back) The Only prob I've had is the onboard sound loses the Right speaker channel sometimes.

Nothing a quick kick to the case won't fix. :D seriously!
 
Newer MSI boards are generally quite good. A few years ago they put out some pretty poor products, but recently they've stepped it up a lot. I wouldn't quite put them on the same level as ASUS and Gigabyte, but they're pretty close.

+1. MSI recently has been pretty good but are still pretty Weak in my opinion. I feel MSI still has alot of work ahead of them to catch up. I personally wouldnt buy an MSI product as this point
 
I loved my MSI x58m, while it worked..... It's going back for it's 2nd Rma in 2 years(for the same reason). Both time's multiple capacitors bulged and the vrm's all burned up even using a heatsink .
 
I really recommend HP,not doing ads...
My BF's computer is HP, and I like it very much-tiny and delicate.
 
HP seems to mean MSI. Well for the few HP machines we have at work. The frustration with these they work hard to make the units non upgradeable. I mean I believe my 150F has a 250W power supply on an i7 860 machine with 8GB of RAM and a 1.5GB video card? Then only expose 3 of the Intel 6 SATA ports.
 
Back
Top