Intel or OCZ for my raid 0 set up?

Robert_J

Limp Gawd
Joined
Oct 24, 2009
Messages
311
Ive been asking alot of questions lately because I want to do a raid 0 set up with SSDs

I was leaning towards two 40 gig intels but after learning about how an SSDs performance will decline without TRIM support im not sure if i want the intel 40 gigs because they dont have TRIM

I found the OCZ 40gb, this has trim support

Id like to hear what you guys think, which would be a better performer in raid 0 the intel or OCZ?

The intel specs are:
Sequential Access - Read up to 170MB/s
and
Sequential Access - Write up to 35MB/s

The OCZ specs are:
Sequential Access - Read up to 280MB/s
and
Sequential Access - Write up to 270MB/s

From this im assuming the OCZ would be faster?

OCZ
http://www.newegg.com/Product/Product.aspx?Item=N82E16820227610

INTEL
http://www.newegg.com/Product/Product.aspx?Item=N82E16820167025
 
thanks i understand now... but what can i do to prevent the decline in performance then?

i heard leaving a percentage of the drive empty will help prevent loss of performance
 
just have it not sleep and the drives have their own garbage collecting stuff if you raid0 them.
 
thanks i understand now... but what can i do to prevent the decline in performance then?

i heard leaving a percentage of the drive empty will help prevent loss of performance

The general consensus seems to be that creating a RAID0 volume that's 80% of the total capacity of all the drives in the array will decrease the amount of performance degradation that happens without TRIM. So if you do decide to go RAID0 that's what I suggest.

My opinion is that if you insist on RAID0 then I would definitely get the Intel drives for their robustness and proven reliability.

However, my SUGGESTION is to take that money and spend it on a SINGLE larger SSD, say from OCZ. The OCZs seem to be pretty reliable and are definitely blazingly fast especially in sequential write speeds.
 
Back
Top