Razer Mamba z axis twitch

epos9889

n00b
Joined
Dec 8, 2009
Messages
48
So I just go the Razer Mamba the other day and I love it. It's very sensitive has great accuracy, and feels great in my hand, the only problem is when I lift it off my mouse pad (ratpad gs) my cursor moves down and the the right. I've heard of this happening before on other mice but i haven't been able to find anyone who has this problem with the Mamba. So what I was wondering is if this is normal or if I should get mine replaced due to a faulty sensor. Thanks in advance. Also the mouse seems to wake my computer up from sleep mode whenever I put it on the charger.
 
Last edited:
I assume your problem is like this.

In that case, it's normal with the shitty sensor Razer uses. Return it and get a Logitech G500 or G9x (not G5 or G9 which have laser sensors inferior to even optical sensors) or an MX518, or a SteelSeries Xai or Kinzu.
 
I assume your problem is like this.

In that case, it's normal with the shitty sensor Razer uses. Return it and get a Logitech G500 or G9x (not G5 or G9 which have laser sensors inferior to even optical sensors) or an MX518, or a SteelSeries Xai or Kinzu.

Absolutely correct, note though, the Xai is a monster that only the MOST serious of mousers ever need or want. As such, i own one, amazing, beyond expectations.
 
That's strange, my Mamba doesn't do that. But maybe I'm not understanding exactly what your doing with the mouse.

When I lift the mouse off my mouse pad (Razer Vespula) the cursor doesn't move at all. When I place it back down on the mouse pad, it's minimal movement and nothing like that YouTube video. The tracking is normal. I even tried to mimic a twitch gamer and move the mouse around quickly and on and off the mouse pad and I can't replicate that issue.
 
How long ago did you get your mamba? Thats strange that yours wouldn't have the issues but it could be the mouse pad your using. If you could try it on some difference surfaces and see if you still don't have it i would greatly appreciate it.
And as a side not is that mouse pad any good? my rat pad is almost worn out and I'm looking at getting a new one.
 
I tried to replicate your issue on my wife's Fellowes mouse pad (Solid Black) and I can't get it to produce any erratic movement.

Does your Mamba have a teflon ring around the mouse sensor? I know that the earlier Mambas shipped out with a silver ring that cause issues.

As for the Vespula, I love it. It's probably the best mouse pad that I've used thus far. It's far superior to my older Razer Destructor and the original RatPadz that I purchased like 10 years ago.
 
So I just go the Razer Mamba the other day and I love it. It's very sensitive has great accuracy, and feels great in my hand, the only problem is when I lift it off my mouse pad (ratpad gs) my cursor moves down and the the right.
They all do it, try the older firmware versions if it really bugs you. However in practice it doesn't seem to matter that much - if you're moving the mouse as you lift it won't twitch at all! for testing only I've been trying to force it become a problem, but it just isn't. If some people are more comfortable, or more accurate with the Avago sensor then I think it's to do with some other charateristic.

Also: the Avago sensors cause a twitch from a static lift, it just doesn't do it in the consistent way a 5600dpi twin-eye does. With Avago the pointer jump on average is a little less, and it does have some tendancy to return toward the direction it came from as the mouse is placed down again.
 
Last edited:
I tried to replicate your issue on my wife's Fellowes mouse pad (Solid Black) and I can't get it to produce any erratic movement.

Does your Mamba have a teflon ring around the mouse sensor? I know that the earlier Mambas shipped out with a silver ring that cause issues.

As for the Vespula, I love it. It's probably the best mouse pad that I've used thus far. It's far superior to my older Razer Destructor and the original RatPadz that I purchased like 10 years ago.

Mine has the black ring around it so its a newer version I believe. What does yours have and what firmware are you using I would like to know if that affects it at all
And thanks I have a rat pad but its wearing out so i was looking at getting a new mouse pad most likely that one now.
 
Mine has the black ring around it so its a newer version I believe. What does yours have and what firmware are you using I would like to know if that affects it at all
And thanks I have a rat pad but its wearing out so i was looking at getting a new mouse pad most likely that one now.

I have the black teflon ring around my mouse sensor. As for the firmware, I'm running v1.13 and my driver is v1.07. They're both the most current versions on Razers site.
 
I run driver version 1.06 and firmware version 1.08.

These seem to be the most stable for the Mamba.
 
I have the black teflon ring around my mouse sensor. As for the firmware, I'm running v1.13 and my driver is v1.07. They're both the most current versions on Razers site.

Alright so yours is older or a different version then mine if you have the Teflon ring. Is is possible they switch lasers and started using a different one in between now and when I got mine? That is the same firmware and drivers I'm using so I don't think that would really effect the twitch.

@ WorldExclusive
What exactly do you mean my most stable; and do you have the twitch to or is yours fine and if not what mouse pad?
 
how do you figure that? Are you trying to suggest epos9889 has a faulty product that he should return? I'm saying it's good, and to stop worrying unnecessarily. In the post you're calling FUD I've said why that the lift off issue is not something to be bothered by. epos9889 appears to be pretty happy overall, there is no point in him seeking a replacement for "faulty sensor" The sensor is operating in a normal way.

The down/right lift off twitch is now extremely well known for mice with the 5600dpi philips twin-eye sensor. I've got one and seen that the effect is different (less consistent) with earlier firmwares: you don't see the static lift twitch so much, however the latest firmware is the one completely removes the deflection while lifting a moving mouse.
 
Last edited:
I also have a razer mamba and I absolutely hate this mouse.I know I dont contribute much to this topic, but I have all kinds of reading and responsiveness errors. I want to get rid of it, but dont really have a spare mouse. Im gonna see what I can do.
 
Could you elaborate? Better performance and tracking? Battery life?

Just curious how you came to that conclusion.

Never had the issues that people been talking about when I downloaded the driver and firmware almost a year ago. It seems like the newer firmware or drivers aren't as stable/functional as the older ones. I use the Ratpadz XT mouse pad but I can put it on desk and it will operate great. What ever it is, not ALL mambas have those issues. Many people also agree that the older drivers and firmware are better. I had mine for almost a year now so I can't speak on battery life. When It was newer the battery lasted about two days plus. It could also be that the newer versions of the Mamba aren't as great. I like it because it fits my hand and playing style perfectly.
 
Never had the issues that people been talking about when I downlaod the driver and firmware over a year ago. It seems like the newer firmware or drivers aren't as stable/functional as the older ones. I use the Ratpadz XT but I can put it on any surface it it operates great. What ever it is, not ALL mamdas have those issues. Many people also agree that the older drivers and firmware are better. I had mine for almost a year now so I can't speak on battery life. When It was newer the battery lasted about two days plus.

I agree, with the 1.13 Firmware and 1.07 driver, I've had no tracking issues whatsoever with my Mamba. The battery life could be a little bit better, but it will easily last me the entire day of heavy gaming. Maybe I have a newer hardware revision, maybe it's the mouse paired with my Razer Vespula that works so well, maybe I just got lucky, dunno.
 
Last edited:
yeah the razer lachesis had this same problem which was fixed in a firmware update but i never had a problem with mine other then the mouse 3 button not working anymore but thats my fault..
 
I agree, with the 1.13 Firmware and 1.07 driver, I've had no tracking issues whatsoever with my Mamba. The battery life could be a little bit better, but it will easily last me the entire day of heavy gaming. Maybe I have a newer hardware revision, maybe it's the mouse paired with my Razer Vespula that works so well, maybe I just got lucky, dunno.

Unfortunately it seems like the luck of the draw or user error when it comes to the Mamba. Logitech doesn't need updates like Razer products so it's pretty much idiot proof, which equals less issues.
 
Flaw in the sensor. However for the mamba there is an "o-ring" that razer can send you that you put over the sensor that is supposed to help a little. it's a huge oversight and hinderance for those who constantly pick up their mice while turning.
 
Back
Top