Computer locks up temporarily accessing the harddrives

purple_haze

2[H]4U
Joined
Oct 14, 2004
Messages
2,124
I have 150gb Raptor, 1TB WD Black, and a Seagate 400GB Harddrive and whenever i try to access either the music or movies from the 1TB harddrive or Seagate it temporarily locks up before the file is accessed. What is going on here?
 
Let's get the most obvious cause out of the way:

Have you set your hard drive(s) to go to sleep after a period of inactivity in your power profile?
 
Either a PIO issue or a bad sector.

Download HDTune and benchmark all your drives. Does any drive have lower than 20MB/s transfer speed? If so, it could be a PIO issue.

Then click the Health tab and check for the SMART value called UDMA_CRC_ERROR_COUNT and CURRENT_PENDING_SECTOR and check the last column called "Data"; the value of this column for both properties needs to be ZERO.

HDTune is free, HDTune Pro is evaluation. But you only need the normal version.
 
Either a PIO issue or a bad sector.

Not really.
It is most likely a delay before the hard drive spins up and reports its status as on-line.

If OP uses Windows 7 that's the most probable scenario.
If that's the case and you're using Microsoft driver for HDD controller, try Intel Matrix storage driver 8.9 (not 9.0). Also it may help to tweak the power saving settings to never bring HDDs to sleep.
 
Windows Vista/7:
Control Panel -> Power Options -> Change Plan Settings (For the Active Plan) -> Change Advanced Power Settings -> Hard Disk -> Turn Hard Disk Off After

Change to never.
 
ashmelev75, yes you could be right. Unless the lockups are 'sporadic' and also happen during usage; not when first accessing it after a long period of inactivity.
 
Back
Top