Asetek Liquid Cooled All-In-One Prototype

Great idea, but the premium price, it will likely sell at, is more than likely not worth it

**I know it is a prototype, so i am speculating
 
Seems like a slick design.

I'd rather have seen less intentional comparison and mimicking of Apple.
 
There is a reason this has not been done in the "PC" world. Would you want to RMA an entire "fragile" device due to bad pixels or PC issues? laptops lend themselves naturally to shiping and have entire repair centers devoted to them, where this device would not and shiping would pose a problem.

As this is a prototype I highly doubt that have done long timed thermal runs against the hard drive they are using and other chip components. Sure they are removing the heat off the video card and processor, but what about the drives or chipset components or even ram? Thermal fatigue caused by the backlight diodes and pc operation will only eventually lead to failure.

Lets not even mention that they are using small form factor boards with liquid capacitors not rated for high thermal loads as they are on laptops and other like devices.
 
thats got to be the GTX280M not a GTX280 desktop.
So it's about the same as a 9800GT or GTS250.
 
thats got to be the GTX280M not a GTX280 desktop.
So it's about the same as a 9800GT or GTS250.

Definitely. He said it was a 75W GPU. The desktop GTX280 uses at least 3 times that much at full load.

Still a cool concept though. He said "low cost", but I'll bet that thing would still cost at least $1800. Which it might me worth it if they put a GTX 470m or mobile HD 5870.
 
There is a reason this has not been done in the "PC" world. Would you want to RMA an entire "fragile" device due to bad pixels or PC issues? laptops lend themselves naturally to shiping and have entire repair centers devoted to them, where this device would not and shiping would pose a problem.
It has been done by several PC manufacturers.. Maybe not the water cooling, but HP has All-in-one PCs already. http://www.shopping.hp.com/touchsmart
 
There is a market for everything, including this. I do not think it's meant to become mainstream but is one of the many options out there.
 
Definitely. He said it was a 75W GPU. The desktop GTX280 uses at least 3 times that much at full load.

Still a cool concept though. He said "low cost", but I'll bet that thing would still cost at least $1800. Which it might me worth it if they put a GTX 470m or mobile HD 5870.

The 480M, depending on the cost of the part, would be a better pick in terms of performance per watt. It consumes 25 more watts but is quite a bit more powerful.

All they need to have in terms of a fail-safe mechanism is temperature sensors that relay to some kind of hardware that will shutdown the computer if temps become unsafe, in the event of a pump or fan failure for example.
 
dude reminded me of Kenneth Parcell from 30 Rock... (I saw a couple episodes)

If it was a touchscreen, then I know from work experience we'd use something like that. We do jobs with all-in-one touchscreen computers like that.

For gaming... nay, ust buy a box and throw stuff in it. This might be popular if lan parties were still big, maybe... I dunno, but good for them for trying to advance some form of design
 
I like the idea of the all in one, but I don't see myself ever leaving a monitor + tower for a daily use box. My tower may continue to shrink (planning a move to ITX for day to day e-mail and browsing) but having the monitor built in...I don't think so. Maybe if they had designed them as together but were able to be unbolted into 2 pieces that would work better. The average customer having to ship the whole thing back doesn't seem like a smart choice if only 1 of the components (monitor or computer) is broken.

Plus I just like having multiple displays all the time, and if I don't need it for computer work, then my Xbox is streaming to the other.
 
Hmmm... I want one!!!

Now if i'll be able to afford one is another matter. Likely not. But I like it. A lot.

Shane
 
Absolutely hideous. Liquid cooling = good. Design = offensive.
 
I actually wouldn't mind owning one of these.... buying one on the other hand.....
 
Would be good for my parents. They only buy a computer every ~5 years, when the current one breaks.
 
Would be good for my parents. They only buy a computer every ~5 years, when the current one breaks.

I don't know. Imagine the possible trouble call:

Your Mom: "Keith, there's something wrong with the computer. Your father accidentally pushed it off of the desk.
It looked fine, so we started it up. Now there's an odd smell, some funny buzzing and I have to take Dad to the ER. He's having chest pains after he touched the screen and it bit him."

You: ..........

:D
 
I would buy this if they kept it in the 1000$ range. The sad thing is that the prototype rig shown in the video is faster than my sig rig and slimmer than my mildly fat samsung t260hd. :eek:
 
Oh yeah btw those pos 120 mm so called water coolers really do an amazing job. Soo much better than air. Let's get real shall we? Cheap apple knock off.
 
Wait my bad it is a dual 120 low profile and I really wanna buy it when I hear these morons read their Q cards in the most articulate way ever imaginable. Now that is bs thermal solution done right.
 
Looks like a company made up of engineers like this guy with no real talent in the industrial design department.

That's what they really need to do to get this thing to stand out because despite all the fancy cooling, right now it looks no better than a cheap late 1990s silver painted plastic generic monitor.
 
Am I the only person who thinks they'd've done better with their 200W of cooling to combine a 45W i7-720M CPU and a 150W 5850 or GTS250 (with plans to swap for the GT460 in the release model)?
 
Am I the only person who thinks they'd've done better with their 200W of cooling to combine a 45W i7-720M CPU and a 150W 5850 or GTS250 (with plans to swap for the GT460 in the release model)?

They could probably cool more than that with the space available.

The whole idea though is to use desktop components that are cheaper and faster than the mobile variants that usually go in these machines.
 
The used a mobile GPU though. That IMO strongly implies that they don't have much, if any, headroom left in their cooling system. Without any side or front airholes in the stand they probably don't have that good of airflow to the rad, limiting it to below what is normally expected from a 2x120 model.
 
Back
Top