Question about the PS3 and cold weather

tel0004

Limp Gawd
Joined
Jan 26, 2007
Messages
499
I have a PS3, and sometimes take it to a friends house, but I may go to work first.

So it sits in my car (0-15 degrees) for 8 hours, then pretty much as soon as I get off, we turn it on and play it.

Will there be any problems with the sudden temperature change, going from 0-120 (or whatever it operates at) in a few minutes?

I didn't think so, but I thought I would ask.
 
possibly, I think letting it get to cold then heatring it up very quickly can break connections on the boads inside (metal rapidly shirking and expanding)
 
With my years dealing with electronics, you will need to let the unit warm up within 20 degrees of ambient where you plan to play it. Compaq computers once had a great technical article mentioning the operation of electronic devices and temperature ranges. Humidity and dryness were also factors. Static shock can also cause havoc from cold dry to warm dry conditions.
 
Condensation can occur with wide temperature changes and that's bad news for electronics...since water and the dust on your motherboard could cause shorts.
 
Bring it in, hook it up and let it sit for 10-20 minutes why you guys are getting the chips and pop around.
 
Bring it in, hook it up and let it sit for 10-20 minutes why you guys are getting the chips and pop around.

Yeah I would say do this just to be safe. I leave my ipod in my car and when it's cold it seems to operate slightly different. Maybe I'm crazy, but the screen seems to respond slower haha. It works fine other than that, but it's something to think about.
 
Yep, leave it sit for about 20 minutes to warm up, just don't hookup the power cord during that time. Every thing else could be hooked up though.
 
Yep, leave it sit for about 20 minutes to warm up, just don't hookup the power cord during that time. Every thing else could be hooked up though.
I think it would be safe to plug in the power cord to get the red light up front on. The power supply is designed to be surge protector of sorts and the current will make a little bit of heat that can slowly warm up the system over 10-20 minutes, maybe enough to bring it up to safe temperatures to power on.
 
Hair dryer, high heat, 5 minutes per side, let cool for 2 minutes then serve. :)
 
I remember being told about hard drives that were shipped and sat on the porch for hours at a time in sub-32 degree weather, to let them warm up before plugging them, since they have delicate moving parts
 
There is a reason why manuals say to let electronics reach ambient temperature before turning on.

Honestly if you did that with an old Xbox 360 you would be asking for RRoD. If it were more like 30-40F outside I might understand, but 0 degrees to operating temp(inside what I can only assume is at least 70-75F) is a bad idea.
 
I'm in IT and when we get computers or servers delivered to us even printers, we let them sit a couple hours in room temperature before plugging in anything. So I think it is better to let it sit for a bit or bring it up with you to work.
 
When I was young, I had an old tube TV which I plugged in immediately after moving to a new house. I live in the great white north, so the temperature change was substantial. I heard a pop when I pressed power ... needless to say the TV was broken.
 
Yeah I would say do this just to be safe. I leave my ipod in my car and when it's cold it seems to operate slightly different. Maybe I'm crazy, but the screen seems to respond slower haha. It works fine other than that, but it's something to think about.

You're not crazy. LCD displays do slow down considerably when they are cold. You're probably fine using it when cold though, as long as it isn't one of the old HDD-based models.
 
Back
Top