i7 920 D0 stepping, where do i get one?

Zer0Cool

Limp Gawd
Joined
Apr 4, 2008
Messages
375
After seeing some reviews and talking to one of the agents on newegg the D0 is not guaranteed.

What are my chances ordering from newegg and in the order comments asking for a D0 stepping?

What is a good reliable website that will guarantee a D0 stepping? I'm in the US.

Thanks.
 
Just get a C0. All chips can do 4ghz if you arent a bad oc'er
You have no idea what you're talking about.

D0 chips have lower voltage requirements than C0, this translates into less power, less heat, and ultimately superior overclocking. There is no reason not to get the D0. Get the D0 chip.
 
I would say that you have about a 90% chance of getting a D0 if you buy from a larger e-tailer because most of the C0s have been sold out for some time now. Find the cheapest price and buy. I got a D0 from here last week:

http://www.ewiz.com/detail.php?name=I7-920BOX

It's $255 with free shipping (use the promo code). You can use Bing cashback and get a few more bucks refunded later.
 
There is no guarantee of course, but nowdays almost all of the chips from larger etailers will be D0, like GreenGoose said. I ordered my i7 from Superbiiz on August 20. and got one that was made on July 1, so the inventory is moving pretty fast. Of course MicroCenter would be the best bet, because you could see the box before you purchase it.
 
You have no idea what you're talking about.

D0 chips have lower voltage requirements than C0, this translates into less power, less heat, and ultimately superior overclocking. There is no reason not to get the D0. Get the D0 chip.

Lol you are talking to someone who has gone through 10 920's. The magin is so small that is hardly makes a difference. With every chip you get you are playing the lottery. I have had a D0 that could do 4ghz at stock volts and run hotter than a C0 @ 1.3v. Whether you would like to argue other variables like thermal paste spread 1-2c change in ambient temp is the cause, go ahead.

I won't argue on the fact that D0's can overclock better that C0's if you are pushing for 5ghz, but I have never seen a chip that couldn't do at least 3.8.

My advice to you is to get any chip to you and roll with it. If you are a bencher, be my guest and grab a D0 because you have a better chance of having a chip that could do better under water. I found C0's to be better 24/7 chips anyways. As someone mentioned Microcenter has em for like 225 after tax, but people are selling chips on here for $200 shipped, so I would look here for a bargain.
 
Last edited:
they are pretty much the same. if you are a guy who likes to get every inch out of a cpu, it might be worth a small amount of extra effort to get a d0.if you are just going to overclock to 3.6 - 3.8ghz then it doesnt matter at all. i have only personally had a couple i7 920's but i have sold about 15 and heard back personally from each guy that bought one. the 200 to 300mhz difference between the b3 and g0 q6600 was considered massive. the difference between a c0 and d0 is small.
 
Thanks Guerilla. I know you have had a lot of CPU's too. So talking from first hand experience and talking from your ass are two different things BusyBeaverHP.
 
Lol you are talking to someone who has gone through 10 920's. The magin is so small that is hardly makes a difference. With every chip you get you are playing the lottery. I have had a D0 that could do 4ghz at stock volts and run hotter than a C0 @ 1.3v. Whether you would like to argue other variables like thermal paste spread 1-2c change in ambient temp is the cause, go ahead.

I won't argue on the fact that D0's can overclock better that C0's if you are pushing for 5ghz, but I have never seen a chip that couldn't do at least 3.8.

My advice to you is to get any chip to you and roll with it. If you are a bencher, be my guest and grab a D0 because you have a better chance of having a chip that could do better under water. I found C0's to be better 24/7 chips anyways. As someone mentioned Microcenter has em for like 225 after tax, but people are selling chips on here for $200 shipped, so I would look here for a bargain.

Which is more accurate that this previous statement of yours:

Just get a C0. All chips can do 4ghz if you arent a bad oc'er

I don't care if you've gone through the entire Intel inventory, telling someone to get a C0 when a D0 option is available is sloppy advice and ignorant. Period.

Without putting numbers on it, I will repeat:
D0 chips have lower voltage requirements than C0, this translates into less power, less heat, and ultimately superior overclocking. There is no reason not to get the D0. Get the D0 chip.

You could argue that a particular C0 chip can do 4GHz under 1.3v and a particular D0 that runs hot as the sun and so forth, but the manner that you've used those example are intended to mislead the overall trend of D0 superiority.

Since every chip is different, we can only rely on trends to tell us which stepping has the edge: http://i107.photobucket.com/albums/m316/wcd26/XS.jpg

SLBEJ = D0
SLBCH = C0

Look at those numbers and interpret them how you want.
 
Last edited:
I barely see any SLBCH's on that spreadsheet and if you are comparing i7 C0/D0 to Q6600 B3/G0 you are mistaken.

The energy savings between a C0 and D0 stepping is marginal. For example your D0 does 3.8 at slighly above stock volts. A C0 can accomplish this @ about 1.3 volts.

That statment may seem stupid, but D0's tend to run hotter with less voltage than their C0 counterparts. The energy savings between 1.25v and 1.3v is so small it isn't worth regarding.

The point I am shaving at here is that unless you are an uber l33t overclocker, you shouldn't worry about getting a D0 stepping chip because...

1. D0's run hotter than C0's even with less volts.
2. The difference in voltage to run at the same freqency is small. It won't kill the polar bears or your wallet if your electricity bill is 50 cents higher. You can go find 50 cents between your couch if you would like.
3. If you don't have a microcenter, you will end up paying a price premium that will not show up on your electricity bill.

Just get whatever is cheapest is my advice to op. I don't have any more time to waste.
 
I barely see any SLBCH's on that spreadsheet and if you are comparing i7 C0/D0 to Q6600 B3/G0 you are mistaken.

The energy savings between a C0 and D0 stepping is marginal. For example your D0 does 3.8 at slighly above stock volts. A C0 can accomplish this @ about 1.3 volts.

That statment may seem stupid, but D0's tend to run hotter with less voltage than their C0 counterparts. The energy savings between 1.25v and 1.3v is so small it isn't worth regarding.

The point I am shaving at here is that unless you are an uber l33t overclocker, you shouldn't worry about getting a D0 stepping chip because...

1. D0's run hotter than C0's even with less volts.
2. The difference in voltage to run at the same freqency is small. It won't kill the polar bears or your wallet if your electricity bill is 50 cents higher. You can go find 50 cents between your couch if you would like.
3. If you don't have a microcenter, you will end up paying a price premium that will not show up on your electricity bill.

Just get whatever is cheapest is my advice to op. I don't have any more time to waste.
Who said anything about Q6600 but yourself? I have no idea why you pulled that one. Leaving it there.

1. I'm questioning that.
http://en.inpai.com.cn/doc/enshowcont.asp?id=5729&pageid=3842
http://74.125.155.132/search?q=cach...+i7&cd=5&hl=en&ct=clnk&gl=us&client=firefox-a (it's a pain in the ass to scroll through the pages, but the evidence contradicting you is there)
http://www.anandtech.com/weblog/showpost.aspx?i=584

2. and 3. is more or less true, but the important thing left out is the temperature factor: it will be markedly hotter going from 1.2v to 1.3v, which will be significant even at the 3.6-3.8GHz OC. The D0 (as a trend) can run higher MHz at lower voltages, and you don't have to submerge your CPU underwater to notice this difference, and this can mean the difference between a 4.0 on air and having to resort to more drastic cooling solutions.
 
to op, you got a lot more info than you needed. sometimes ncix will specify whether its a d0 or c0. sometimes, if you scroll down the page on amazon, they will spec it also sometimes. if you buy from newegg, there is a very good chance you will get a d0. if you dont, its not a big deal.

if i were looking for an 17 920 d0 for around $250 to $260, i would go to ebay and search 17 920 under computers and networking. there are literally hundreds of them, new in box, stepping slbej (d0) and for good prices. cant put an ebay link up in this forum, so you are on your own.
 
I think his point was that the margin between C0 and D0 is pretty damn small, which is it. He didn't suggest that the OP go and specifically buy a C0, he just said don't stress over which one you get, which is also correct.

Regardless, any major online retailer is almost certainly only shipping D0 chips at this point.
 
If you have a Microcenter nearby, get one there. If not, start scouring the FS/FT forums or Fleabay, that would probably be your best bet.
 
You might want to give AmongTheChosenX a PM, since he said earlier today that he'd be heading to a Microcenter. If you can work something out with him, that would be by far the best way to ensure you get a well-priced D0 Core i7 920. :)
 
The C0 vs. D0 debate should have ended by now, but hasn't. To the OP... I own a D0, magical batch week 46 B batch, but it still takes me 1.35Vcore 1.35VTT and watercooling to run at 4.0Ghz comfortably in a closed case. I could prime all day at 1.25V, but not linpack... My D0 can run at higher clocks, but I haven't had the need and can't justify the heat to do it. D0s run very hot!

A golden chip, is going to also rely on a motherboard, PSU, cooling, and memory to shine, so remember all of the other factors. If you get a C0 it's not the end of the world.
 
To the OP your chances of getting a D0 from Newegg or any other large e-tailor is probably close to 100% since C0 chips haven't been manufactured in months and any seller with high inventory turnover will only have D0 chips.

To everyone who still hasn't realized that there isn't a huge magical difference between C0 and D0 here is everything you need to know:

1. There are excellent chips that will overclock past 4 GHz in both the C0 and D0 flavors.

2. The vast majority of C0 and D0 chips will overclock to between 3.4 - 4.0 GHz.

3. There are poor overclocking C0 and D0 chips that will not surpass 3.4 GHz.

4. The early D0 batches overclocked like champs compared to the later C0 batches, but as time has gone on the chips have been comparable.

5. All i7 CPUs run hot. D0 may run slightly cooler with less voltage, but then again it may not.

6. A successful overclock relies on many factors and there are absolutely no guarantees.

To verify any of these facts simply refer to your good friend the Internet and read about 25 hours worth of i7 920 overclocking forum chatter.
 
I would say that you have about a 90% chance of getting a D0 if you buy from a larger e-tailer because most of the C0s have been sold out for some time now. Find the cheapest price and buy. I got a D0 from here last week:

http://www.ewiz.com/detail.php?name=I7-920BOX

It's $255 with free shipping (use the promo code). You can use Bing cashback and get a few more bucks refunded later.
Do make sure you're careful with SuperBiiz/ewiz though as my OEM was C0. Make sure to get the retail version as suggested here for hopefully better results.
 
Back
Top