HTPC stopped playing HD MKV files

Lothar

Limp Gawd
Joined
Jun 7, 2004
Messages
305
Out of the blue my Vista 32 HTPC stopped playing any HD 720p or 1080p MKV files. In either VMC or WMP, the app will immediately crash with a this application has stopped working window. All other files play fine, including MKV files that have a lower then 720 resolution. I have installed the latest Nvidia drivers, haali media splitter and CCCP codec. I have checked all video and sound settings. But still they will not play. The files play fine on my other systems. I am at my wits end, what can I try next.
 
Have you tried a player like Media Player Classic Home Cinema? I've never had that happen to me, but WMP has been acting weird since SP2. I'll be playing a movie, and stop it with the X for close window, and the video will go away, but the sound will keep going, no way to stop it except task manager, and kill process.
 
I figured it out, I had forgotten that a few weeks ago I did upgrade the CPU in this system. Apparently a CPU or other hardware swap like a mother board or primary hard drive, will cause the DRM in Vista to lock all HD content. This is just stupid as there was no warning or way for me to tell it was a DRM issue and none of my HD files have DRM. I created them from my own HD-DVD's or now Blu-ray discs.

The way to fix the issue is to delete all of the files in the hidden folder C:\program data\microsoft\windows\DRM. Warning this will not work if your files do have DRM as they are link to your original hardware.
 
I have found the CCCP codec pack to work well with FFDshow. Do you know of something that works better?

Are you playing your videos from within media center? If that's the case then I use the mpcvideodec.ax filter, haali media splitter and ac3filter. Done. All mkv's will play with full hardware acceleration.


I don't recommend CoreAVC for two reasons. 1, it only has hardware acceleration for nvidia cards. If you use Intel or ATI you out of luck. 2, its' not free.
The MPCVideoDec.ax filter is free. You manually register it and you get hardware acceleration for Nvidia, ATI and Intel.
The only reason I would recommend CoreAVC is if you don't have a GPU, discrete or onboard, capable of hardware acceleration as CoreAVC is the best software decoder available.

I also don't use MPC-HC as I don't want to use an external player. I don't use a mouse on my HTPC and I don't want to manually launch the program and open the files I want to play. I want everything playable from within media center, with a remote, from the couch. On my desktop I would use it but on an HTPC I prefer to use the built in systems along with the media browser plug in for organization.

Use graphedit to verify it's using the proper codecs for your movies files and if not you can use radlight filter manager to adjust the merits of the codecs.
 
Last edited:
For playback of ANYTHING (minus real, but fuck that):

  • 1.) Install MPC-HC from xvidvideo.ru, no where else.
  • 2.) Done.

For playback of ANYTHING (again, no real) in 7MC x86:

  • Install Windows 7 x86.
  • Install Haalis or Gabest media splitter.
  • If you aren't using S/PDIF/HDMI for audio, install AC3Filter to decode DTS. DD is taken care of with the internal filters.
  • If you want hardware acceleration and don't have any of know what a level 5.1 encode is, install and register mpcvideodec.ax.
  • If you DO have quite a few level 5.1 encodes and have an Nvidia card, CoreAVC with CUDA is the best decoder out there. MUCH more compatible.
  • Install the 7MC DirectShow Changer from Doom9 and use it to select the filters you want 7MC to use.

I know I forgot something... I'll just edit if I remember.
 
For playback of ANYTHING (minus real, but fuck that):

  • 1.) Install MPC-HC from xvidvideo.ru, no where else.
  • 2.) Done.

For playback of ANYTHING (again, no real) in 7MC x86:

  • Install Windows 7 x86.
  • Install Haalis or Gabest media splitter.
  • If you aren't using S/PDIF/HDMI for audio, install AC3Filter to decode DTS. DD is taken care of with the internal filters.
  • If you want hardware acceleration and don't have any of know what a level 5.1 encode is, install and register mpcvideodec.ax.
  • If you DO have quite a few level 5.1 encodes and have an Nvidia card, CoreAVC with CUDA is the best decoder out there. MUCH more compatible.
  • Install the 7MC DirectShow Changer from Doom9 and use it to select the filters you want 7MC to use.

I know I forgot something... I'll just edit if I remember.

I would say if you ARE using spdif/hdmi you need to use ac3filter. So you can bitstream DD and DTS out to the recevier.

I'll have to take your word on these 5.1 encodes and compatability issues. However I have over 260 movies now and haven't had a single issue with any of them using the mpcvideodec.ax filter.
 
I'm sending DD/DTS out to my reciever perfectly fine iin 7MC without AC3Filter. Just make sure your digital out is enabled in the Sound control panel and DD/DTS output is enabled.

wvtmutfhqnxfztu4rmrx.png


And yea, lvl 5.1 1080p encodes with more than 8 ref frames don't always play nice with DXVA.
 
I'm sending DD/DTS out to my reciever perfectly fine iin 7MC without AC3Filter. Just make sure your digital out is enabled in the Sound control panel and DD/DTS output is enabled.

wvtmutfhqnxfztu4rmrx.png


And yea, lvl 5.1 1080p encodes with more than 8 ref frames don't always play nice with DXVA.

I don't have that screen on my HDMI device. I do on my spdif device however i'm not using that. My supported formats tab looks very different.
 
Are you playing your videos from within media center? If that's the case then I use the mpcvideodec.ax filter, haali media splitter and ac3filter. Done. All mkv's will play with full hardware acceleration.



I don't recommend CoreAVC for two reasons. 1, it only has hardware acceleration for nvidia cards. If you use Intel or ATI you out of luck. 2, its' not free.
The MPCVideoDec.ax filter is free. You manually register it and you get hardware acceleration for Nvidia, ATI and Intel.
The only reason I would recommend CoreAVC is if you don't have a GPU, discrete or onboard, capable of hardware acceleration as CoreAVC is the best software decoder available.

I also don't use MPC-HC as I don't want to use an external player. I don't use a mouse on my HTPC and I don't want to manually launch the program and open the files I want to play. I want everything playable from within media center, with a remote, from the couch. On my desktop I would use it but on an HTPC I prefer to use the built in systems along with the media browser plug in for organization.

Use graphedit to verify it's using the proper codecs for your movies files and if not you can use radlight filter manager to adjust the merits of the codecs.

For the record, I use the x64 version of MPCVideoDec.ax. I just know that some people prefer CUDA on x86.
 
The screen you get depends a great deal on your audio device driver I think.
 
I don't have that screen on my HDMI device. I do on my spdif device however i'm not using that. My supported formats tab looks very different.

This is interesting. I will forward all this info to w1retap to include in his Windows 7 media playback guide. It should be finished by time he is un-banned... lol
 
This is interesting. I will forward all this info to w1retap to include in his Windows 7 media playback guide. It should be finished by time he is un-banned... lol

I can provide a screenshot as well if you wish. Though it will have to wait until I get home.

I don't know if it just my crappy board(Intel DG45ID) or if that's normal for HDMI.
 
I can provide a screenshot as well if you wish. Though it will have to wait until I get home.

I don't know if it just my crappy board(Intel DG45ID) or if that's normal for HDMI.

If you could that would be great. The same screens I did. Thanks. :)
 
Back
Top