Transferring about 500gb for reformat

mekanikal

Weaksauce
Joined
Jan 3, 2005
Messages
87
Whats up guys, so i have my 500 gb hd that has xp installed on it, lately the OS has been acting up, so i need to format. I have a 500gb external that i can use to transfer my files to. Im just wondering how long this would take with usb... Or if you guys have any suggestions on how to do it faster. Im not gonna be an idiot this time im gonna install xp on my other hd and use this 500gig one for just these files.
 
Take your external, open it up, install it to your system like any other hard drive.

500 gb at a transfer rate of 10mb/s. Do the math.
 
Take your external, open it up, install it to your system like any other hard drive.

500 gb at a transfer rate of 10mb/s. Do the math.

What he said... That would take for-effin-ever to transfer. While you are at it, make a secondary partition for all of your stuff so you do not have to go thru x-ferring all of your stuff again...
 
Yah, make your OS partition about 100GB or so, then leave the rest for data. After setting up XP again, don't forget to move your mydocs folder and/or your docs/settings to your data partition.
 
500 GB @ 30 MB/s via IDE/SATA USB bridge = 4.75 hours optimally, 3.5 hours theoretically.
Take your external, open it up, install it to your system like any other hard drive.
500 GB @ 70 MB/s via direct IDE/SATA bus = 2 hours.

Math 101:

500 GB * 1024 MB/GB = 512,000 MB

512,000 MB / 30 MB / 1 s = 17066.67 s

17066.67 s / 60 s / 1 min = 284.44 min

284.44 min / 60 min / 1 hr = 4.74 hrs

0.74 hrs * 60 min = 45 min

I believe multiplying and dividing is something mastered by 5th grade, and telling time by 3rd grade.
 
With a data transfer rate that long, you might as well start it, leave, then come back a while later. I seems like your spending too much time thinking about this.
 
USB speeds would be more than that cuz most of us don't have an adapter for whatever bridge. 8pin (or 7) header = 10mb/s upload, so multiply your times by 3.
 
With USB2.0 file transfers, if you have large files, you'll get the 30MB/s, typically. But with a bunch of smaller files, your average drops to about 10-15MB/s. The theoretical speed of USB2.0, however, is 60MB/s, lol.
 
USB speeds would be more than that cuz most of us don't have an adapter for whatever bridge. 8pin (or 7) header = 10mb/s upload, so multiply your times by 3.
That is a component of the external kit the drive was included with.
With USB2.0 file transfers, if you have large files, you'll get the 30MB/s, typically. But with a bunch of smaller files, your average drops to about 10-15MB/s.
This is very likely.
The theoretical speed of USB2.0, however, is 60MB/s, lol.
I use 40 for theoretical since you'll never have 100% access to the bus with one device. There's always something else sharing it. And I've never seen a transfer rate above 30 for USB. I don't know if that's the bridge or the nature of the bus causing it.
 
... I use 40 for theoretical since you'll never have 100% access to the bus with one device. There's always something else sharing it. And I've never seen a transfer rate above 30 for USB. I don't know if that's the bridge or the nature of the bus causing it.

Yah... I used what the spec indicated as the max speed, but you're right, you never get such speeds.
 
Even slower if the files are all fragmented or dense (numerous small filesizes). I remember backing up 1.8 TB worth of images onto external drives via USB once on a system. That actually took quite a few number of days; many more than would have been if the files were videos for example.
 
Meh. Delete all your Pron. There's always new Pron to download and fill it all up again.
 
Meh. Delete all your Pron. There's always new Pron to download and fill it all up again.

So what? Any deletion or loss is a tragedy and should be done so cautiously and only when the file in question is of bad taste. Like cows, I mean fat women.
 
Back
Top