OLD Motherboard question

Judd Sandage

Limp Gawd
Joined
Jun 6, 2004
Messages
187
I have a Tyan Tomcat IIID motherboard that has 2 Pentium 233mhz CPUs with MMX and a total of 64mb of ram on board, I want to mess with it say throw some kind of Linux on it and maybe duel boot with windows NT or maybe 2000 for use with amateur radio gear but my main question is what size hdd can I use on this? at least the main IDE channels as I don't want to have to install a controller card if I don't have to, it uses a Intel 430HX chipset with DMA-2 support and PIO mode 3-4 support but its been so long and my google-fu seems to be failing me on finding out the max size for this mobo. any ideas guys? also yes I know that its not supposed to support duel 233mmx CPUs but it seems to work fine with them, and my friend used this system back in the late 90s as Linux router... though he doesn't remember the specifics for the board anymore.
 
hmm, that's some old mobo indeed :eek:
i don't remember very well, but back in the day there was this limit the 504 MB or the 528 MB barrier (binary or decimal MB) some problem between IDE PATA standards and the Int 13h BIOS standard, but that was solved using new BIOSes

either 528MB or 2.1GB
 
well I know its got the latest BIOS on it, but that was updated back in '98 but it dosnet refer to HDDs I don't know exactly what HDDs it can use, I think my friend used a 10.1gb WD expert on it but I cant remember exactly nor can he.. he just tells me to trash it but I cant seem to part with what was originally a dumpster dived board.
 
What I'd do, divide whatever smallish IDE into 8g partitions and put Freebsd or something on it. (because
I already dual-booted 2 years or so with BSD as secondary, and I run p2,p3 with _6 Freebsd from a
purchased CD set on two laptops. Larger drives, max 127g and test if the mobo recognizes each
partition. (More hints, but no time [1] to research them [2] adequately, this is just cursory info).
[1]... No time for a worthy answer, as

[2]... Stuff I knew more about 5 years ago, learned too much in the meantime to recall enough.
 
Last edited:
You can use HDDs as big as you like, really - just make sure that all boot partitions are *below* 2GB. As long as you can boot the drive in question from a partition below the 2GB mark you're golden. Linux doesn't care as long as GRUB can get to your kernel, though Win2K may be a bit pickier (a full system partition will fit into 1GB easily, though).
 
that question is not so old. only been up around 4 or 15 hours.

my sarcasm meter is not working right now but I am going to assume you wrote it as such.

silverpower thank you I will try a small drive and partition it in a few under 2gb parts and see if that works for me...

any ideas as to what flavor of Linux I should use guys and gals? never having delt with Linux before this will be my first foray in to *ix.
 
Remember, the only part of the boot drive that needs to be under 2GB is /boot, or your Win2K system partition (you'll be installing software on another partition). In order for these old things to pick up your boot partition, it needs to be under the 2GB boundary. The BIOS usually doesn't care *what* is in the >2GB region, so long as when it starts booting, everything the OS needs to load a proper IDE driver is under the 2GB mark. In Linux, putting /boot under the 2GB mark is sufficient (the kernel resides there, and once it's loaded, it can safely ignore pretty much any IDE restriction your BIOS imposes), but with Win2K, the system partition has to be under the 2GB boundary - both beginning and end points, no less.

As for distro? Debian or Slackware. Keep in mind that this sort of machine isn't all that great at exploring the capabilities of Linux - nowadays, the 'newbie' distros expect something in the range of a P3 with 256MB and either an i810 (or better), Rage128, or pre-X1000 Radeon. I learned Linux running Slackware 9 on an ancient 1xP233MMX rig, but don't suggest you repeat that - you'll inevitably want to play with browsers that aren't elinks/links-X11, or use something fancier than Fluxbox. That said, if you're going to stick with this - Debian all the way, because you'll most likely have an Ethernet card installed. Slackware is a tad... idiosyncratic. I only used it because I'd had good experiences with it on ancient hardware, and at the time it was very suitable for offline installs (I was without consistent 'net until around 2005).
 
yeah I forgot just the 2gb partition thing... I will have to set this up this weekend when I get a chance... no just to find 2 HSFs for socket 7, the fans on the ones in it are dead.. well I guess I could MacGyver something.
 
Back
Top