2009 VW Jetta Carputer

Thinking of doing this soon also, like to see how he setup the audio. I'm going for a all SQ setup and not sure how on board audio will sound, heard it was best to get a card that support ASIO standard and get some pro audio programs that allow you to put on x-overs, equalizers for each channel, time delays, etc. Have a nice double din slot open on the car waiting for something like this.
 
I have been thinking of doing this for a while. Now with the advent of the ATom cpu and how good so many mini-ITX carcases are, it is really tempting. The problem Is, I don't want to mess up and I am no fabricator, electrician or mechanic.
SO I would mess something up.
 
If you want info on how to do this, check out MP3Car.com. If you want your bezels modded and have a screen installed, PM me, I know someone who does this very well.

I am running a WinXP machine in my car (same case as the pic) and two amps in the back. A USB 5.1 sound card, USB hub in the ashtray, USB GPS, and USB BlueTooth dongle. A friend of mine added a microphone right above the sun visor for hands-free. You can't even tell it's there.

All the speaker wires run to the amps in the back, the USB sound card pumps the audio. I have a serial device on the way that turns on the amps after the computer to kill the loud "THUMP" when the car is turned on. The software I run is called Centrafuse, I log OBDII data with it as well, and upload maps.

Wiring isn't that bad, just don't make a mess and Micky Mouse it. Take your time and do it right.
 
so this certainly prompted me to finally get off my butt and finish registration of my account. Its my car that the super amazing Steve linked :) ha

Anyways, yes its windows XP, I plan on migrating to windows 7 after its been out for a while.......probably, currently the boot time is pretty good though, under 30 seconds, which is great considering the system specs, which are:


Computer (and peripherals)
-Via Epia EN-15000G integrated board

-one stick 512MB DDR2 533

-The hard drive is an old Hitachi Travelstar 5K100 5,400 rpm (handles 300G of force while in operating, so farrr more than i'll ever survive, though I'll go solid state within the next year)

-I'm using onboard sound because there isnt any room for me putting an internal audio card, and I havent found a USB option yet that I'm completely happy with, though I'm open to suggestions, remember though, this thing has weak processing power (for power consumption requirements - this thing can easily run overnight and not drain battery) and a lot of USB solutions can gobble up a lot of CPU cycles. BTW sound is currently in 4 channel, though I really would rather run 4.1 with a phantom center if anyone has any ideas.

-GPS is handled inside of windows of course with a bluetooth dongle (that way if I go bike riding for instance I can pull the receiver and hook it up to my cell phone)

-Keyboard is also bluetooth of course

AUDIO
-Infinity Kappa Perfect Components all the way around powered by a 60.4 JBL amp

-Sub is a Rockford Fosgate P3 12" in a 1.1 cu/ft Sealed box, I'm feeding it 400 Watts from a Rockford fosgate amp

-Have a 1-farad cap for the thing too, so far more than I need, which is the way to go of course

Crysis
Well of course it will play crysis, maxed graphics too, get a whole 0.005 fps too!

Had a local guy (John) at an ultimate electronics do all the custom install work for me on this car, I wanted it done as cleanly as possible in my new car and I don't have the patience to do it quite right, I couldnt have been happier with his work

I'll take some newer pics tomorrow
 
ha, oh ya, the screen is a 7" Lilliput touchscreen, Its transflective too btw so even when the sun is shining directly on it you can still see everything perfectly
 
so this certainly prompted me to finally get off my butt and finish registration of my account. Its my car that the super amazing Steve linked :) ha

Anyways, yes its windows XP, I plan on migrating to windows 7 after its been out for a while.......probably, currently the boot time is pretty good though, under 30 seconds, which is great considering the system specs, which are:


Computer (and peripherals)
-Via Epia EN-15000G integrated board

-one stick 512MB DDR2 533

-The hard drive is an old Hitachi Travelstar 5K100 5,400 rpm (handles 300G of force while in operating, so farrr more than i'll ever survive, though I'll go solid state within the next year)

-I'm using onboard sound because there isnt any room for me putting an internal audio card, and I havent found a USB option yet that I'm completely happy with, though I'm open to suggestions, remember though, this thing has weak processing power (for power consumption requirements - this thing can easily run overnight and not drain battery) and a lot of USB solutions can gobble up a lot of CPU cycles. BTW sound is currently in 4 channel, though I really would rather run 4.1 with a phantom center if anyone has any ideas.

-GPS is handled inside of windows of course with a bluetooth dongle (that way if I go bike riding for instance I can pull the receiver and hook it up to my cell phone)

-Keyboard is also bluetooth of course

AUDIO
-Infinity Kappa Perfect Components all the way around powered by a 60.4 JBL amp

-Sub is a Rockford Fosgate P3 12" in a 1.1 cu/ft Sealed box, I'm feeding it 400 Watts from a Rockford fosgate amp

-Have a 1-farad cap for the thing too, so far more than I need, which is the way to go of course

Crysis
Well of course it will play crysis, maxed graphics too, get a whole 0.005 fps too!

Had a local guy (John) at an ultimate electronics do all the custom install work for me on this car, I wanted it done as cleanly as possible in my new car and I don't have the patience to do it quite right, I couldnt have been happier with his work

I'll take some newer pics tomorrow

That's awesome. I'll be keeping an eye on this thread for a time. I drive a 2001 Taurus and it has a huge radio surface which can be replaced with an aftermarket radio faceplace which I can make bigger holes in for an LCD screen. I've been wanting to do something like this for awhile now.
 
Very sweet ride there sir. I'm looking to do my own car PC in the future and hope to do something as clean as this.

Where did you mount the PC itself though? I'm trying to figure out the best way to put things in my own car once I get around to doing my own.
 
Very sweet ride there sir. I'm looking to do my own car PC in the future and hope to do something as clean as this.

Where did you mount the PC itself though? I'm trying to figure out the best way to put things in my own car once I get around to doing my own.


Its mounted on top of the sub in the trunk, have it there because its a slightly more open area so a bit more airflow to keep her cool, though the one downside to this is the vibrations coming off of the sub box. In a few weeks I'll finally get around to having it mounted up on a vibration-dampened piece of 1/2" MDF

If you have a spinning HDD the biggest threat to it in your car (besides condensation) is vibration, though the HDD I have should be more than hardy enough to tough it out for a little while, eventually I'll just move to solid state and it wont be a problem.
 
I looked at car cases and i didn't find any good ones that had a addin card, they have pcie risers so you can use a broader range of cases, but those car ones usually don't have any addon slots, none that i saw. and the cases that aren't meant for cars i have a feeling would rattle like hell.

I probably would use a flash storage or a ssd drive to store things on cause of vibration, i have a 18" LMS 5400 sub with a JBL A3000GTi going in my car right now, i'm not even sure a carputer will work anywhere in the car with that amount of vibration but i'll try it out.

Is that monitor you used, fit into a 2 din spot? I think you can get 7" display into 2 din spot, (2 din is 7 inches wide by 4 inches high, (might be 7.22 x 4.22 exactly)),?

you should try win 7 it might run better than xp on that thing, but drivers might be spotty for the gps and other things. I put it on a old laptop and it did great.
 
So how are you putting out sound to the amps?

You are using speaker amp wise what I have for my car and I have a 9" touch screen that I have been thinking about using with a ION platform when they come out.

What are you doing for the computer when the car gets shutoff? I guess you could run something like a turbo timer on the monitor 12v? So you shut off your car but it will keep running until the monitor looses its 12v sender? But you would need the ignition to hit the hibernate button or something....

Let me know it looks pretty neat!
 
I looked at car cases and i didn't find any good ones that had a addin card, they have pcie risers so you can use a broader range of cases, but those car ones usually don't have any addon slots, none that i saw. and the cases that aren't meant for cars i have a feeling would rattle like hell.

I probably would use a flash storage or a ssd drive to store things on cause of vibration, i have a 18" LMS 5400 sub with a JBL A3000GTi going in my car right now, i'm not even sure a carputer will work anywhere in the car with that amount of vibration but i'll try it out.

Is that monitor you used, fit into a 2 din spot? I think you can get 7" display into 2 din spot, (2 din is 7 inches wide by 4 inches high, (might be 7.22 x 4.22 exactly)),?

you should try win 7 it might run better than xp on that thing, but drivers might be spotty for the gps and other things. I put it on a old laptop and it did great.


its a fairly normal double din slot, but it barely fit in there, sanding was needed, ha

also, I use some programs to manage shortcut control of the entire system that arent supported any longer I dont think, and they certainly wouldnt work for windows 7 anymore, let alone even vista, but i'm still looking at windows 7 a bit after its released so drivers can all be updated for it
 
So how are you putting out sound to the amps?

You are using speaker amp wise what I have for my car and I have a 9" touch screen that I have been thinking about using with a ION platform when they come out.

What are you doing for the computer when the car gets shutoff? I guess you could run something like a turbo timer on the monitor 12v? So you shut off your car but it will keep running until the monitor looses its 12v sender? But you would need the ignition to hit the hibernate button or something....

Let me know it looks pretty neat!

carputer is run off of a switch (just like my inverter), so I have hard control over when its on and off. It will run overnight without problem, so if i'm out and have places to go, running into stores for example, I leave the carputer on so that when I pop back in my car its already on and instantly ready to produce music
 
carputer is run off of a switch (just like my inverter), so I have hard control over when its on and off. It will run overnight without problem, so if i'm out and have places to go, running into stores for example, I leave the carputer on so that when I pop back in my car its already on and instantly ready to produce music

And sound to the amps?

Is there a device that takes digital Coax to multiple RCA AMP outputs?
 
Pretty sweet! I have an 06 TDi Jetta and thought about trying that but went with a Kenwood 8120 instead, might change up though down the road. Where did you get the bezel or did you make it? Very nice.
 
Pretty sweet! I have an 06 TDi Jetta and thought about trying that but went with a Kenwood 8120 instead, might change up though down the road. Where did you get the bezel or did you make it? Very nice.

Bezel was custom fabricated by John, he had a base one they used on cars with dins right around that size and went from there. It ended up actually being 3 pieces put together with a fair amount of fiberglass work. He actually cut holes and did a LOT of sanding so that I kept all my stock buttons as well as the logo and IR port for the screen.
 
Nice, but is it a TDI!

My GF has a 04 TDI with 5 speed, love it, 44 mpg city (i'm driving it till she learns to drive a stick)!!!
 
Maybe get rid of that Liliput logo and put the VW logo there? It would look OEM with no logo at all though. I find a lot of people "afraid" of a CarPC, because if something goes wrong with it, they freak out. There needs to be a nice stripped down OS that just runs the software drivers and that's it. Quicker boot times and even quicker wake-ups.

BTW, where in the country do you live? I find that the screen does not like -20 deg temps when I lived in Chicago. To where it's not responsive, the film feels and looks like it will separate from each other, and the LCD crystals act funky. The screen may flicker or it won't even come on. Even when I kept the ride in the garage, still got messed up. I am about to try out the heat of a Texas summer, I know there will be issues with the heat as cars get to 210 deg or more with windows rolled up.
 
I don't know if anyone said it yet, os if it's not ok to post this, but I used to be in that communty for a long time, and had several carpcs, the main forums is over at www.mp3car.com tons and tons of info, how-to's, helpful ppl.

check it out. I need to get back into this hobby...
 
They have apps that run on windows designed for the carputer itself, like the previous poster said almost everything you want to know is on that site, Few of the programs are open source which is really nice.
 
Nice, but is it a TDI!

My GF has a 04 TDI with 5 speed, love it, 44 mpg city (i'm driving it till she learns to drive a stick)!!!

Ya its the new 09 TDI


Maybe get rid of that Liliput logo and put the VW logo there? It would look OEM with no logo at all though. I find a lot of people "afraid" of a CarPC, because if something goes wrong with it, they freak out. There needs to be a nice stripped down OS that just runs the software drivers and that's it. Quicker boot times and even quicker wake-ups.

BTW, where in the country do you live? I find that the screen does not like -20 deg temps when I lived in Chicago. To where it's not responsive, the film feels and looks like it will separate from each other, and the LCD crystals act funky. The screen may flicker or it won't even come on. Even when I kept the ride in the garage, still got messed up. I am about to try out the heat of a Texas summer, I know there will be issues with the heat as cars get to 210 deg or more with windows rolled up.

I actually like the Lilliput logo, give anyone who knows the arena at all an immediate heads up. As for winters, when it gets anywhere below freezing really you basically have a 'warm up' time on the LCD, i've had a xenarc in my last car for a few years, and its held up completely fine, just needed that warm up time. They do make a super bright (1000 nics) xenarc screen, that thing has ZERO warm up time, but gets damn hot at times. As for the heat of the summer, if you have a well made screen (xenarc or lilliput usually) then it should be fine, the dash of your car might get up to 180-200 tops, the front of the dash should be fine



and ya, the mp3 car community is great, kinda the base hub of the carputer community
 
not sure why this is fpn, but anyway i don't like carpc cases. they don't offer flexibility and i question why you would want to cram hundreds of dollars of valuable parts into a nice, easy to steal package. sometimes you have to use them, because space is limited, but most cars have some sort of dead space that you can fit a mATX motherboard in, open air, and have room to add real pci cards and such.

and power draw can still be kept low if you pick the right mATX parts and cpu'
s.
 
Definately like what you have done. I too would suggest removing the lilyput logo and maybe even try modding that green LED to a red one so that it matches the rest of the lights in the car. That would make it look completely OEM.
 
As for winters, when it gets anywhere below freezing really you basically have a 'warm up' time on the LCD, i've had a xenarc in my last car for a few years, and its held up completely fine, just needed that warm up time. They do make a super bright (1000 nics) xenarc screen, that thing has ZERO warm up time, but gets damn hot at times. As for the heat of the summer, if you have a well made screen (xenarc or lilliput usually) then it should be fine, the dash of your car might get up to 180-200 tops, the front of the dash should be fine
I have a Lilliput, and it survived the winter. The time it took to get operational was about my commute time :p. But even when it was functional, it still has that strange feel to it like it's gonna come apart.
 
Back
Top