APC backup on its way out

Riddleofsteel

[H]ard|Gawd
Joined
Feb 4, 2007
Messages
1,983
If I turn my APC UPS off for the night because of the noise it makes, when I turn it on in the morning it doesn't supply enough power to turn my pc on immediately, it takes a few tries. It's a Back UPS 1500 model. Is this an indication that the UPS needs to be replaced? I have had it for years, what should I replace it with? Thanks.
 
If it's a standby type UPS (AC power until AC fails -> switch-over to battery), then the UPS should just work unless there is some kind of self-check which prevents it from doing so, or something worse.

You could contact APC to see what they have to say about this issue. I would definitely consider replacing it with another APC UPS if replacement is necessary.
 
It works but it never used to do this until about 3 weeks ago. I will turn the UPS on, then when the testing stops and the unit is ready I press my PC's power button. The fans spin but stop, and this happens each time until a certain amount of time passes. Then when I wait long enough and press power the pc comes on for real.
 
It works but it never used to do this until about 3 weeks ago. I will turn the UPS on, then when the testing stops and the unit is ready I press my PC's power button. The fans spin but stop, and this happens each time until a certain amount of time passes. Then when I wait long enough and press power the pc comes on for real.

And the last time you replaced the batteries?;)
 
You're absolutely certain the PC is working fine? :)
 
Yes, I just upgraded nearly every component, including the case. This problem happened when pressing the power button on my last case also.
 
I wouldn't want to try it too much more, if your not supplying enough power to the whole system that could harm it! (I believe)
 
I think you have narrowed it down to the UPS. I really wouldn't use the UPS any more at this point. Try contacting APC to see whether they have a possibly solution.
 
If it helps, I have been through 3 of those exact back-ups units over the past 5 or so years. I currently have two in use with a few other UPS units. I have one of the tall beige units, and the newest 1500 model (the smaller black, brick shaped unit with the LCD screen), which seems to be the most reliable and best built unit of them all.

When mine would do what you describe, even swapping the battery did not help. I have no idea what is wrong with the old design, but the tall beige 1500s were no good for me. The control circuitry would just die after a year or so.
 
Could it be my PSU? Because his morning I can't even get it to turn on, the fans/lights just flicker and stop and now I am terrified of frying something.
 
Have you just directly plugged your PSU into the wall? That will tell you if your PSU is damaged.
 
I just did that and now I know it's the PSU. Same problem. I didn't see this coming, and I'm upset that I may have damaged my new build with this psu problem. I will look into a new psu and hopefully nothing else will need to be replaced.
 
Is there any chance that the problem is not the PSU? Someone on a different forum thinks it's the power switch on my case/motherboard. I would have considered that but I had this same problem in my previous case with this same power supply.
 
If I turn my APC UPS off for the night because of the noise it makes, when I turn it on in the morning it doesn't supply enough power to turn my pc on immediately, it takes a few tries. It's a Back UPS 1500 model. Is this an indication that the UPS needs to be replaced? I have had it for years, what should I replace it with? Thanks.

What noise is it making? My APC Back UPS 1500va is silent unless there is a power outage. Could you be having brown out issues?
 
It makes a loud beep which is sometimes cut off by a clicking noise. Only happens in the dead of night.
 
It makes a loud beep which is sometimes cut off by a clicking noise. Only happens in the dead of night.

Is that just it running it's weekly self-test, which happens to fall in the middle of the night once a week?

If you've already determined that the issue you posted about is your PSU and not your UPS, you can probably put off any stressing over any problems the UPS may or may not have until you've replaced the PSU.

Even if your UPS has a problem, it might just need a new battery, and APCs usually have plenty of indicators on them to tell you what's going on or what's wrong.
 
It happens nightly. I can't remember when it didn't do it. So I started turning it off about a month ago so I could sleep. Any idea if this is really my psu? I still think it is since I plugged into the wall outlet and had the same problem.

EDIT: I didn't see the end part of your post, must not have scrolled down far enough. I'll get a new PSU if I need to, just hope I haven't messed anything up. Thanks.
 
It happens nightly. I can't remember when it didn't do it. So I started turning it off about a month ago so I could sleep. Any idea if this is really my psu? I still think it is since I plugged into the wall outlet and had the same problem.

EDIT: I didn't see the end part of your post, must not have scrolled down far enough. I'll get a new PSU if I need to, just hope I haven't messed anything up. Thanks.

Have a look here, many many post about the same issue:

http://www.hardforum.com/showthread.php?t=1383630
 
Not sure what to do here, Silverstone says I can RMA the power supply but if the problem is a switch or motherboard part (unlikely), should I still RMA the Decathlon?
 
I'm filling out the RMA form, but over the last two days I find that if I leave the computer alone for about a half hour after switching on the UPS it will turn on fine. How is Silverstone's RMA service? Will I get my psu back repaired or will I get a refurbished one from god knows where? Thanks, just want to know if it's worth going without a PSU for an undetermined amount of time while I RMA.
 
Back
Top